| Message ID | 1424713215-3357-6-git-send-email-p.zabel@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 7ab00a4..4b12ac0 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -598,7 +598,7 @@ regulator-name = "vddpu"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1450000>; - regulator-always-on; + regulator-enable-ramp-delay = <150>; anatop-reg-offset = <0x140>; anatop-vol-bit-shift = <9>; anatop-vol-bit-width = <5>;
The PU regulator is enabled during boot, but not necessarily always-on. It can be disabled by the generic pm domain framework when the PU power domain is shut down. The ramp delay of 150 us might be a bit conservative, the value is taken from the Freescale kernel. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> --- Changes since v8: - Removed regulator-boot-on, this depends on the bootloader --- arch/arm/boot/dts/imx6qdl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)