| Message ID | 1424887219-26652-1-git-send-email-simon.guinot@sequanux.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 02/25/2015 10:00 AM, Simon Guinot wrote: > On the LaCie 2Big Network v2 (net2big_v2) board, the fan alarm is not > wired to the I2C fan controller but to a separe GPIO. This GPIO can be > controlled by using the gpio-fan driver. > > This patch adds the gpio-fan alarm description in the net2big_v2 DTS. > > Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
Hi Simon, On 25/02/2015 19:00, Simon Guinot wrote: > On the LaCie 2Big Network v2 (net2big_v2) board, the fan alarm is not > wired to the I2C fan controller but to a separe GPIO. This GPIO can be > controlled by using the gpio-fan driver. > > This patch adds the gpio-fan alarm description in the net2big_v2 DTS. Now that the driver part had been merged, I applied this patch on mvebu/dt. Thanks, Gregory > > Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> > --- > arch/arm/boot/dts/kirkwood-net2big.dts | 5 +++++ > 1 file changed, 5 insertions(+) > > v2 change: > - Fix node name according to the ePAPR standard. > > diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/kirkwood-net2big.dts > index 53dc37a3b687..13a44773b6df 100644 > --- a/arch/arm/boot/dts/kirkwood-net2big.dts > +++ b/arch/arm/boot/dts/kirkwood-net2big.dts > @@ -27,6 +27,11 @@ > device_type = "memory"; > reg = <0x00000000 0x10000000>; > }; > + > + fan { > + compatible = "gpio-fan"; > + alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; > + }; > }; > > ®ulators { >
diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/kirkwood-net2big.dts index 53dc37a3b687..13a44773b6df 100644 --- a/arch/arm/boot/dts/kirkwood-net2big.dts +++ b/arch/arm/boot/dts/kirkwood-net2big.dts @@ -27,6 +27,11 @@ device_type = "memory"; reg = <0x00000000 0x10000000>; }; + + fan { + compatible = "gpio-fan"; + alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + }; }; ®ulators {
On the LaCie 2Big Network v2 (net2big_v2) board, the fan alarm is not wired to the I2C fan controller but to a separe GPIO. This GPIO can be controlled by using the gpio-fan driver. This patch adds the gpio-fan alarm description in the net2big_v2 DTS. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> --- arch/arm/boot/dts/kirkwood-net2big.dts | 5 +++++ 1 file changed, 5 insertions(+) v2 change: - Fix node name according to the ePAPR standard.