| Message ID | 1424938344-4017-23-git-send-email-wangyijing@huawei.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Feb 26, 2015 at 04:12:16PM +0800, Yijing Wang wrote: > From: Yijing Wang <wangyijing0307@gmail.com> When you write subject lines, I think it's friendly to run "git log --oneline" on the file you're changing, and make yours match the previous ones. $ git log --oneline drivers/parisc/dino.c 3f05536d226d PCI/Parisc: Use pci_scan_root_bus() for simplicity 3335f75a8877 parisc: dino: fix %d confusingly prefixed with 0x in format string 3fad9b8d597f drivers/parisc: Use printf extension %pR for struct resource 0fe763c570ad Drivers: misc: remove __dev* attributes. 0b79ca2a800d parisc/PCI: Use list_for_each_entry() for bus->devices traversal 30aa80da43a5 parisc/PCI: register busn_res for root buses ... Yours doesn't match any of them, but "parisc/PCI" seems the best match. > Now pci_bus_add_devices() has been ripped out > from pci_scan_root_bus(), we could use pci_scan_root_bus() > instead of pci_create_root_bus() + pci_scan_child_bus() > for simplicity. We could also remove the pci bus > resource(dino_current_bus,255) and pci_bus_update_busn_res_end(), > because pci_scan_root_bus() would do the same thing. > > Signed-off-by: Yijing Wang <wangyijing@huawei.com> > CC: "James E.J. Bottomley" <jejb@parisc-linux.org> > CC: linux-parisc@vger.kernel.org > --- > drivers/parisc/dino.c | 11 ++--------- > drivers/parisc/lba_pci.c | 7 ++----- > 2 files changed, 4 insertions(+), 14 deletions(-) > > diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c > index a0580af..e5ee339 100644 > --- a/drivers/parisc/dino.c > +++ b/drivers/parisc/dino.c > @@ -977,15 +977,11 @@ static int __init dino_probe(struct parisc_device *dev) > if (dino_dev->hba.gmmio_space.flags) > pci_add_resource(&resources, &dino_dev->hba.gmmio_space); > > - dino_dev->hba.bus_num.start = dino_current_bus; > - dino_dev->hba.bus_num.end = 255; > - dino_dev->hba.bus_num.flags = IORESOURCE_BUS; > - pci_add_resource(&resources, &dino_dev->hba.bus_num); I know pci_scan_root_bus() does default to bus 0-255, but I don't really like that behavior, and I think it's a bug for drivers like this to rely on that. The PCI core has no way to discover the actual bus number range, and the only reason it supplies a default is because it was inconvenient to change all the callers. The host bridge driver is the only code that has any chance of discovering and/or configuring the correct range. So I think it's more correct to leave the existing code here, even though this code is is likely incorrect. At least then if we trip over an issue with the bus range being incorrect, it will be clear that the fix should be in dino.c rather than the PCI core.
On 2015/3/3 11:24, Bjorn Helgaas wrote: > On Thu, Feb 26, 2015 at 04:12:16PM +0800, Yijing Wang wrote: >> From: Yijing Wang <wangyijing0307@gmail.com> > > When you write subject lines, I think it's friendly to run > "git log --oneline" on the file you're changing, and make yours > match the previous ones. > > $ git log --oneline drivers/parisc/dino.c > 3f05536d226d PCI/Parisc: Use pci_scan_root_bus() for simplicity > 3335f75a8877 parisc: dino: fix %d confusingly prefixed with 0x in format string > 3fad9b8d597f drivers/parisc: Use printf extension %pR for struct resource > 0fe763c570ad Drivers: misc: remove __dev* attributes. > 0b79ca2a800d parisc/PCI: Use list_for_each_entry() for bus->devices traversal > 30aa80da43a5 parisc/PCI: register busn_res for root buses > ... > > Yours doesn't match any of them, but "parisc/PCI" seems the best match. OK, I will refresh the title, sorry. > >> Now pci_bus_add_devices() has been ripped out >> from pci_scan_root_bus(), we could use pci_scan_root_bus() >> instead of pci_create_root_bus() + pci_scan_child_bus() >> for simplicity. We could also remove the pci bus >> resource(dino_current_bus,255) and pci_bus_update_busn_res_end(), >> because pci_scan_root_bus() would do the same thing. >> >> Signed-off-by: Yijing Wang <wangyijing@huawei.com> >> CC: "James E.J. Bottomley" <jejb@parisc-linux.org> >> CC: linux-parisc@vger.kernel.org >> --- >> drivers/parisc/dino.c | 11 ++--------- >> drivers/parisc/lba_pci.c | 7 ++----- >> 2 files changed, 4 insertions(+), 14 deletions(-) >> >> diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c >> index a0580af..e5ee339 100644 >> --- a/drivers/parisc/dino.c >> +++ b/drivers/parisc/dino.c >> @@ -977,15 +977,11 @@ static int __init dino_probe(struct parisc_device *dev) >> if (dino_dev->hba.gmmio_space.flags) >> pci_add_resource(&resources, &dino_dev->hba.gmmio_space); >> >> - dino_dev->hba.bus_num.start = dino_current_bus; >> - dino_dev->hba.bus_num.end = 255; >> - dino_dev->hba.bus_num.flags = IORESOURCE_BUS; >> - pci_add_resource(&resources, &dino_dev->hba.bus_num); > > I know pci_scan_root_bus() does default to bus 0-255, but I don't really > like that behavior, and I think it's a bug for drivers like this to rely on > that. The PCI core has no way to discover the actual bus number range, and > the only reason it supplies a default is because it was inconvenient to > change all the callers. The host bridge driver is the only code that has > any chance of discovering and/or configuring the correct range. > > So I think it's more correct to leave the existing code here, even though > this code is is likely incorrect. At least then if we trip over an issue > with the bus range being incorrect, it will be clear that the fix should > be in dino.c rather than the PCI core. OK, I would keep this code here, thanks! > > . >
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index a0580af..e5ee339 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -977,15 +977,11 @@ static int __init dino_probe(struct parisc_device *dev) if (dino_dev->hba.gmmio_space.flags) pci_add_resource(&resources, &dino_dev->hba.gmmio_space); - dino_dev->hba.bus_num.start = dino_current_bus; - dino_dev->hba.bus_num.end = 255; - dino_dev->hba.bus_num.flags = IORESOURCE_BUS; - pci_add_resource(&resources, &dino_dev->hba.bus_num); /* ** It's not used to avoid chicken/egg problems ** with configuration accessor functions. */ - dino_dev->hba.hba_bus = bus = pci_create_root_bus(&dev->dev, + dino_dev->hba.hba_bus = bus = pci_scan_root_bus(&dev->dev, dino_current_bus, &dino_cfg_ops, NULL, &resources); if (!bus) { printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (duplicate bus number %d?)\n", @@ -996,13 +992,10 @@ static int __init dino_probe(struct parisc_device *dev) return 0; } - max = pci_scan_child_bus(bus); - pci_bus_update_busn_res_end(bus, max); - /* This code *depends* on scanning being single threaded * if it isn't, this global bus number count will fail */ - dino_current_bus = max + 1; + dino_current_bus = bus->busn_res.end + 1; pci_bus_assign_resources(bus); pci_bus_add_devices(bus); return 0; diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index dceb9dd..ba6daec 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -1422,7 +1422,6 @@ lba_driver_probe(struct parisc_device *dev) void *tmp_obj; char *version; void __iomem *addr = ioremap_nocache(dev->hpa.start, 4096); - int max; /* Read HW Rev First */ func_class = READ_REG32(addr + LBA_FCLASS); @@ -1563,15 +1562,13 @@ lba_driver_probe(struct parisc_device *dev) dev->dev.platform_data = lba_dev; lba_bus = lba_dev->hba.hba_bus = - pci_create_root_bus(&dev->dev, lba_dev->hba.bus_num.start, + pci_scan_root_bus(&dev->dev, lba_dev->hba.bus_num.start, cfg_ops, NULL, &resources); if (!lba_bus) { pci_free_resource_list(&resources); return 0; } - max = pci_scan_child_bus(lba_bus); - /* This is in lieu of calling pci_assign_unassigned_resources() */ if (is_pdc_pat()) { /* assign resources to un-initialized devices */ @@ -1599,7 +1596,7 @@ lba_driver_probe(struct parisc_device *dev) lba_dev->flags |= LBA_FLAG_SKIP_PROBE; } - lba_next_bus = max + 1; + lba_next_bus = pci_bus_child_max_busnr(lba_bus) + 1; pci_bus_add_devices(lba_bus); /* Whew! Finally done! Tell services we got this one covered. */