new file mode 100644
@@ -0,0 +1,108 @@
+* Broadcom Keypad Controller device tree bindings
+
+Broadcom Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+keypad,num-rows and keypad,num-columns are required.
+
+Required SoC Specific Properties:
+- compatible: should be "brcm,bcm-keypad"
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- interrupts: The interrupt number to the cpu.
+
+Board Specific Properties:
+- keypad,num-rows: Number of row lines connected to the keypad
+ controller.
+
+- keypad,num-columns: Number of column lines connected to the
+ keypad controller.
+
+- col-debounce-filter-period: The debounce period for the Column filter.
+
+ KEYPAD_DEBOUNCE_1_ms = 0
+ KEYPAD_DEBOUNCE_2_ms = 1
+ KEYPAD_DEBOUNCE_4_ms = 2
+ KEYPAD_DEBOUNCE_8_ms = 3
+ KEYPAD_DEBOUNCE_16_ms = 4
+ KEYPAD_DEBOUNCE_32_ms = 5
+ KEYPAD_DEBOUNCE_64_ms = 6
+ KEYPAD_DEBOUNCE_128_ms = 7
+
+- status-debounce-filter-period: The debounce period for the Status filter.
+
+ KEYPAD_DEBOUNCE_1_ms = 0
+ KEYPAD_DEBOUNCE_2_ms = 1
+ KEYPAD_DEBOUNCE_4_ms = 2
+ KEYPAD_DEBOUNCE_8_ms = 3
+ KEYPAD_DEBOUNCE_16_ms = 4
+ KEYPAD_DEBOUNCE_32_ms = 5
+ KEYPAD_DEBOUNCE_64_ms = 6
+ KEYPAD_DEBOUNCE_128_ms = 7
+
+- row-output-enabled: An optional property indicating whether the row or
+ column is being used as output. If specified the row is being used
+ as the output. Else defaults to column.
+
+- pull-up-enabled: An optional property indicating the Keypad scan mode.
+ If specified implies the keypad scan pull-up has been enabled.
+
+- autorepeat: Boolean, Enable auto repeat feature of Linux input
+ subsystem (optional).
+
+- linux,keymap: The keymap for keys as described in the binding document
+ devicetree/bindings/input/matrix-keymap.txt.
+
+Example:
+#include "dt-bindings/input/input.h"
+
+/ {
+ keypad: keypad@180ac000 {
+ /* Required SoC specific properties */
+ compatible = "brcm,bcm-keypad";
+
+ /* Required Board specific properties */
+ keypad,num-rows = <5>;
+ keypad,num-columns = <5>;
+ status = "okay";
+
+ linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_F) /* key_forward */
+ MATRIX_KEY(0x00, 0x03, KEY_HOME) /* key_home */
+ MATRIX_KEY(0x00, 0x04, KEY_M) /* key_message */
+ MATRIX_KEY(0x01, 0x00, KEY_A) /* key_contacts */
+ MATRIX_KEY(0x01, 0x01, KEY_1) /* key_1 */
+ MATRIX_KEY(0x01, 0x02, KEY_2) /* key_2 */
+ MATRIX_KEY(0x01, 0x03, KEY_3) /* key_3 */
+ MATRIX_KEY(0x01, 0x04, KEY_S) /* key_speaker */
+ MATRIX_KEY(0x02, 0x00, KEY_P) /* key_phone */
+ MATRIX_KEY(0x02, 0x01, KEY_4) /* key_4 */
+ MATRIX_KEY(0x02, 0x02, KEY_5) /* key_5 */
+ MATRIX_KEY(0x02, 0x03, KEY_6) /* key_6 */
+ MATRIX_KEY(0x02, 0x04, KEY_VOLUMEUP) /* key_vol_up */
+ MATRIX_KEY(0x03, 0x00, KEY_C) /* key_call_log */
+ MATRIX_KEY(0x03, 0x01, KEY_7) /* key_7 */
+ MATRIX_KEY(0x03, 0x02, KEY_8) /* key_8 */
+ MATRIX_KEY(0x03, 0x03, KEY_9) /* key_9 */
+ MATRIX_KEY(0x03, 0x04, KEY_VOLUMEDOWN) /* key_vol_down */
+ MATRIX_KEY(0x04, 0x00, KEY_H) /* key_headset */
+ MATRIX_KEY(0x04, 0x01, KEY_KPASTERISK) /* key_* */
+ MATRIX_KEY(0x04, 0x02, KEY_0) /* key_0 */
+ MATRIX_KEY(0x04, 0x03, KEY_GRAVE) /* key_# */
+ MATRIX_KEY(0x04, 0x04, KEY_MUTE) /* key_mute */
+ >;
+
+ /* Optional board specific properties */
+ col-debounce-filter-period = <5>;
+ row-output-enabled;
+ pull-up-enabled;
+
+ };
+};