| Message ID | 1426262769-26758-1-git-send-email-galak@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 03/13/2015 06:06 PM, Kumar Gala wrote: > Add initial device tree support for Qualcomm MSM8916 SoC and MTP8916 > evaluation board. At the current time we only boot up a single processor. > > Signed-off-by: Kumar Gala <galak@codeaurora.org> > --- > v5: > * killed use of skeleton, moved to addr/size cells both being 2 > * Added serial alias in prep of being able to spec uart params > in chosen node > > v4: > * Added chosen node so we dont need to spec everything for earlycon > * fixed up timer node to armv8, dropped clock-frequency > > v3: > * Removed qcom,msm-id and qcom,board-id > * Added top level compat for "qcom,msm8916-mtp-smb1360" > > v2: > * Updated to dropping CONFIG_ARCH_QCOM_MSM8916 > * Updated to use qcom-ids.h > > arch/arm64/boot/dts/Makefile | 1 + > arch/arm64/boot/dts/qcom/Makefile | 5 + > arch/arm64/boot/dts/qcom/msm8916-mtp.dts | 21 ++++ > arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi | 32 +++++ > arch/arm64/boot/dts/qcom/msm8916.dtsi | 195 ++++++++++++++++++++++++++++++ > 5 files changed, 254 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/Makefile > create mode 100644 arch/arm64/boot/dts/qcom/msm8916-mtp.dts > create mode 100644 arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi > create mode 100644 arch/arm64/boot/dts/qcom/msm8916.dtsi > > diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile > index e0350ca..8517f15 100644 > --- a/arch/arm64/boot/dts/Makefile > +++ b/arch/arm64/boot/dts/Makefile > @@ -5,5 +5,6 @@ dts-dirs += cavium > dts-dirs += exynos > dts-dirs += freescale > dts-dirs += mediatek > +dts-dirs += qcom > > subdir-y := $(dts-dirs) > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > new file mode 100644 > index 0000000..360ec4c > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -0,0 +1,5 @@ > +dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb > + > +always := $(dtb-y) > +subdir-y := $(dts-dirs) > +clean-files := *.dtb > diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts > new file mode 100644 > index 0000000..784ad92 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts > @@ -0,0 +1,21 @@ > +/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. multi line comment rules > +* > +* This program is free software; you can redistribute it and/or modify > +* it under the terms of the GNU General Public License version 2 and > +* only version 2 as published by the Free Software Foundation. > +* > +* This program is distributed in the hope that it will be useful, > +* but WITHOUT ANY WARRANTY; without even the implied warranty of > +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +* GNU General Public License for more details. > +*/ > + > +/dts-v1/; > + > +#include "msm8916-mtp.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. MSM 8916 MTP"; > + compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp-smb1360", > + "qcom,msm8916", "qcom,mtp"; > +}; > diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi > new file mode 100644 > index 0000000..8dbb77f > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi > @@ -0,0 +1,32 @@ > +/* Copyright (c) 2014-2014, The Linux Foundation. All rights reserved. multi line comment rules and 2014-2015 > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include "msm8916.dtsi" > + > +/ { > + aliases { > + serial0 = &blsp1_uart2; > + }; > + > + chosen { > + stdout-path = "serial0"; > + }; > + > + soc { > + serial@78b0000 { > + status = "okay"; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&blsp1_uart2_default>; > + pinctrl-1 = <&blsp1_uart2_sleep>; > + }; > + }; Why don't describe this as: &blsp1_uart2 { status = "okay"; pinctrl-names = xxxx; .... }; it looks more readable and obvious. This is what the other boards doing as well. <snip>
On Mar 17, 2015, at 4:24 AM, Stanimir Varbanov <stanimir.varbanov@linaro.org> wrote: > On 03/13/2015 06:06 PM, Kumar Gala wrote: >> Add initial device tree support for Qualcomm MSM8916 SoC and MTP8916 >> evaluation board. At the current time we only boot up a single processor. >> >> Signed-off-by: Kumar Gala <galak@codeaurora.org> >> --- >> v5: >> * killed use of skeleton, moved to addr/size cells both being 2 >> * Added serial alias in prep of being able to spec uart params >> in chosen node >> >> v4: >> * Added chosen node so we dont need to spec everything for earlycon >> * fixed up timer node to armv8, dropped clock-frequency >> >> v3: >> * Removed qcom,msm-id and qcom,board-id >> * Added top level compat for "qcom,msm8916-mtp-smb1360" >> >> v2: >> * Updated to dropping CONFIG_ARCH_QCOM_MSM8916 >> * Updated to use qcom-ids.h >> >> arch/arm64/boot/dts/Makefile | 1 + >> arch/arm64/boot/dts/qcom/Makefile | 5 + >> arch/arm64/boot/dts/qcom/msm8916-mtp.dts | 21 ++++ >> arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi | 32 +++++ >> arch/arm64/boot/dts/qcom/msm8916.dtsi | 195 ++++++++++++++++++++++++++++++ >> 5 files changed, 254 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/Makefile >> create mode 100644 arch/arm64/boot/dts/qcom/msm8916-mtp.dts >> create mode 100644 arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi >> create mode 100644 arch/arm64/boot/dts/qcom/msm8916.dtsi >> >> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile >> index e0350ca..8517f15 100644 >> --- a/arch/arm64/boot/dts/Makefile >> +++ b/arch/arm64/boot/dts/Makefile >> @@ -5,5 +5,6 @@ dts-dirs += cavium >> dts-dirs += exynos >> dts-dirs += freescale >> dts-dirs += mediatek >> +dts-dirs += qcom >> >> subdir-y := $(dts-dirs) >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> new file mode 100644 >> index 0000000..360ec4c >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -0,0 +1,5 @@ >> +dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb >> + >> +always := $(dtb-y) >> +subdir-y := $(dts-dirs) >> +clean-files := *.dtb >> diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts >> new file mode 100644 >> index 0000000..784ad92 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts >> @@ -0,0 +1,21 @@ >> +/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. > > multi line comment rules > >> +* >> +* This program is free software; you can redistribute it and/or modify >> +* it under the terms of the GNU General Public License version 2 and >> +* only version 2 as published by the Free Software Foundation. >> +* >> +* This program is distributed in the hope that it will be useful, >> +* but WITHOUT ANY WARRANTY; without even the implied warranty of >> +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> +* GNU General Public License for more details. >> +*/ >> + >> +/dts-v1/; >> + >> +#include "msm8916-mtp.dtsi" >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. MSM 8916 MTP"; >> + compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp-smb1360", >> + "qcom,msm8916", "qcom,mtp"; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi >> new file mode 100644 >> index 0000000..8dbb77f >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi >> @@ -0,0 +1,32 @@ >> +/* Copyright (c) 2014-2014, The Linux Foundation. All rights reserved. > > multi line comment rules and 2014-2015 > >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 and >> + * only version 2 as published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> + >> +#include "msm8916.dtsi" >> + >> +/ { >> + aliases { >> + serial0 = &blsp1_uart2; >> + }; >> + >> + chosen { >> + stdout-path = "serial0"; >> + }; >> + >> + soc { >> + serial@78b0000 { >> + status = "okay"; >> + pinctrl-names = "default", "sleep"; >> + pinctrl-0 = <&blsp1_uart2_default>; >> + pinctrl-1 = <&blsp1_uart2_sleep>; >> + }; >> + }; > > Why don't describe this as: > > &blsp1_uart2 { > status = "okay"; > pinctrl-names = xxxx; > .... > }; > > it looks more readable and obvious. This is what the other boards doing > as well. I find the way it is more explicit and obvious, plus it works for cases that don’t have a label associated with them. I’ll fixup the multiline comment issues. - k
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index e0350ca..8517f15 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -5,5 +5,6 @@ dts-dirs += cavium dts-dirs += exynos dts-dirs += freescale dts-dirs += mediatek +dts-dirs += qcom subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile new file mode 100644 index 0000000..360ec4c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts new file mode 100644 index 0000000..784ad92 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts @@ -0,0 +1,21 @@ +/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 and +* only version 2 as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +/dts-v1/; + +#include "msm8916-mtp.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. MSM 8916 MTP"; + compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp-smb1360", + "qcom,msm8916", "qcom,mtp"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi new file mode 100644 index 0000000..8dbb77f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi @@ -0,0 +1,32 @@ +/* Copyright (c) 2014-2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "msm8916.dtsi" + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + soc { + serial@78b0000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi new file mode 100644 index 0000000..45ceca6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -0,0 +1,195 @@ +/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8916.h> +#include <dt-bindings/reset/qcom,gcc-msm8916.h> + +/ { + model = "Qualcomm Technologies, Inc. MSM8916"; + compatible = "qcom,msm8916"; + + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { }; + + chosen { }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x1>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x2>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x3>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + pinctrl@1000000 { + compatible = "qcom,msm8916-pinctrl"; + reg = <0x1000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_uart2_default: blsp1_uart2_default { + pinmux { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; + }; + + blsp1_uart2_sleep: blsp1_uart2_sleep { + pinmux { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-pull-down; + }; + }; + }; + + gcc: qcom,gcc@1800000 { + compatible = "qcom,gcc-msm8916"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x1800000 0x80000>; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78b0000 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; + }; + + timer@b020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xb020000 0x1000>; + clock-frequency = <19200000>; + + frame@b021000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb021000 0x1000>, + <0xb022000 0x1000>; + }; + + frame@b023000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb023000 0x1000>; + status = "disabled"; + }; + + frame@b024000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb024000 0x1000>; + status = "disabled"; + }; + + frame@b025000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb025000 0x1000>; + status = "disabled"; + }; + + frame@b026000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb026000 0x1000>; + status = "disabled"; + }; + + frame@b027000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb027000 0x1000>; + status = "disabled"; + }; + + frame@b028000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb028000 0x1000>; + status = "disabled"; + }; + }; + }; +};
Add initial device tree support for Qualcomm MSM8916 SoC and MTP8916 evaluation board. At the current time we only boot up a single processor. Signed-off-by: Kumar Gala <galak@codeaurora.org> --- v5: * killed use of skeleton, moved to addr/size cells both being 2 * Added serial alias in prep of being able to spec uart params in chosen node v4: * Added chosen node so we dont need to spec everything for earlycon * fixed up timer node to armv8, dropped clock-frequency v3: * Removed qcom,msm-id and qcom,board-id * Added top level compat for "qcom,msm8916-mtp-smb1360" v2: * Updated to dropping CONFIG_ARCH_QCOM_MSM8916 * Updated to use qcom-ids.h arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/qcom/Makefile | 5 + arch/arm64/boot/dts/qcom/msm8916-mtp.dts | 21 ++++ arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi | 32 +++++ arch/arm64/boot/dts/qcom/msm8916.dtsi | 195 ++++++++++++++++++++++++++++++ 5 files changed, 254 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/Makefile create mode 100644 arch/arm64/boot/dts/qcom/msm8916-mtp.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8916.dtsi