@@ -611,6 +611,21 @@ config SETEND_EMULATION
If unsure, say Y
endif
+config USE_ICC_SYSREGS_FOR_IRQFLAGS
+ bool "Use ICC system registers for IRQ masking"
+ select CONFIG_ARM_GIC_V3
+ help
+ Using the ICC system registers for IRQ masking makes it possible
+ to simulate NMI on ARM64 systems. This allows several interesting
+ features (especially debug features) to be used on these systems.
+
+ Say Y here to implement IRQ masking using ICC system
+ registers. This will result in an unbootable kernel if these
+ registers are not implemented or made inaccessible by the
+ EL3 firmare or EL2 hypervisor (if present).
+
+ If unsure, say N
+
endmenu
menu "Boot options"
@@ -23,6 +23,7 @@
#ifndef __ASM_ASSEMBLER_H
#define __ASM_ASSEMBLER_H
+#include <linux/irqchip/arm-gic-v3.h>
#include <asm/ptrace.h>
#include <asm/thread_info.h>
@@ -39,26 +40,79 @@
.endm
/*
+ * Enable and disable pseudo NMI.
+ */
+ .macro disable_nmi
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ msr daifset, #2
+#endif
+ .endm
+
+ .macro enable_nmi
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ msr daifclr, #2
+#endif
+ .endm
+
+/*
+ * Save/disable and restore pseudo NMI.
+ */
+ .macro save_and_disable_nmis, olddaif
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ mrs \olddaif, daif /* Get flags */
+ disable_nmi
+#endif
+ .endm
+
+ .macro restore_nmis, olddaif
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ msr daif, \olddaif
+#endif
+ .endm
+
+/*
* Enable and disable interrupts.
*/
- .macro disable_irq
+ .macro disable_irq, tmp
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ mov \tmp, #ICC_PMR_EL1_MASKED
+ msr_s ICC_PMR_EL1, \tmp
+ isb
+#else
msr daifset, #2
+#endif
.endm
- .macro enable_irq
+ .macro enable_irq, tmp
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ enable_nmi
+ mov \tmp, #ICC_PMR_EL1_UNMASKED
+ msr_s ICC_PMR_EL1, \tmp
+ isb
+#else
msr daifclr, #2
+#endif
.endm
/*
* Save/disable and restore interrupts.
*/
- .macro save_and_disable_irqs, olddaif
- mrs \olddaif, daif
- disable_irq
+ .macro save_and_disable_irqs, olddaif, tmp
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ mrs_s \olddaif, ICC_PMR_EL1 /* Get PMR */
+#else
+ mrs \olddaif, daif /* Get flags */
+#endif
+ disable_irq \tmp
.endm
.macro restore_irqs, olddaif
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ msr_s ICC_PMR_EL1, \olddaif /* Write to PMR */
+ isb
+#else
msr daif, \olddaif
+#endif
.endm
/*
@@ -90,13 +144,19 @@
9990:
.endm
+
/*
* Enable both debug exceptions and interrupts. This is likely to be
* faster than two daifclr operations, since writes to this register
* are self-synchronising.
*/
- .macro enable_dbg_and_irq
+ .macro enable_dbg_and_irq, tmp
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ enable_dbg
+ enable_irq \tmp
+#else
msr daifclr, #(8 | 2)
+#endif
.endm
/*
@@ -20,6 +20,8 @@
#include <asm/ptrace.h>
+#ifndef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+
/*
* CPU interrupt mask handling.
*/
@@ -84,6 +86,93 @@ static inline int arch_irqs_disabled_flags(unsigned long flags)
return flags & PSR_I_BIT;
}
+#else /* CONFIG_IRQFLAGS_GIC_MASKING */
+
+#include <linux/irqchip/arm-gic-v3.h>
+
+/*
+ * CPU interrupt mask handling.
+ */
+static inline unsigned long arch_local_irq_save(void)
+{
+ unsigned long flags, masked = ICC_PMR_EL1_MASKED;
+
+ asm volatile(
+ "// arch_local_irq_save\n"
+ "mrs_s %0, " __stringify(ICC_PMR_EL1) "\n"
+ "msr_s " __stringify(ICC_PMR_EL1) ",%1\n"
+ "isb\n"
+ : "=&r" (flags)
+ : "r" (masked)
+ : "memory");
+
+ return flags;
+}
+
+static inline void arch_local_irq_enable(void)
+{
+ unsigned long unmasked = ICC_PMR_EL1_UNMASKED;
+
+ asm volatile(
+ "// arch_local_irq_enable\n"
+ "msr_s " __stringify(ICC_PMR_EL1) ",%0\n"
+ "isb\n"
+ :
+ : "r" (unmasked)
+ : "memory");
+}
+
+static inline void arch_local_irq_disable(void)
+{
+ unsigned long masked = ICC_PMR_EL1_MASKED;
+
+ asm volatile(
+ "// arch_local_irq_disable\n"
+ "msr_s " __stringify(ICC_PMR_EL1) ",%0\n"
+ "isb\n"
+ :
+ : "r" (masked)
+ : "memory");
+}
+
+/*
+ * Save the current interrupt enable state.
+ */
+static inline unsigned long arch_local_save_flags(void)
+{
+ unsigned long flags;
+
+ asm volatile(
+ "// arch_local_save_flags\n"
+ "mrs_s %0, " __stringify(ICC_PMR_EL1) "\n"
+ : "=r" (flags)
+ :
+ : "memory");
+
+ return flags;
+}
+
+/*
+ * restore saved IRQ state
+ */
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+ asm volatile(
+ "// arch_local_irq_restore\n"
+ "msr_s " __stringify(ICC_PMR_EL1) ",%0\n"
+ "isb\n"
+ :
+ : "r" (flags)
+ : "memory");
+}
+
+static inline int arch_irqs_disabled_flags(unsigned long flags)
+{
+ return !(flags & ICC_PMR_EL1_G_BIT);
+}
+
+#endif /* CONFIG_IRQFLAGS_GIC_MASKING */
+
#define local_fiq_enable() asm("msr daifclr, #1" : : : "memory")
#define local_fiq_disable() asm("msr daifset, #1" : : : "memory")
@@ -25,6 +25,16 @@
#define CurrentEL_EL1 (1 << 2)
#define CurrentEL_EL2 (2 << 2)
+/* PMR values used to mask/unmask interrupts */
+#define ICC_PMR_EL1_G_SHIFT 6
+#define ICC_PMR_EL1_G_BIT (1 << ICC_PMR_EL1_G_SHIFT)
+#define ICC_PMR_EL1_UNMASKED 0xf0
+#define ICC_PMR_EL1_MASKED (ICC_PMR_EL1_UNMASKED ^ ICC_PMR_EL1_G_BIT)
+
+#define PSR_G_SHIFT 22
+#define PSR_G_PMR_G_SHIFT (PSR_G_SHIFT - ICC_PMR_EL1_G_SHIFT)
+#define PSR_I_PMR_G_SHIFT (7 - ICC_PMR_EL1_G_SHIFT)
+
/* AArch32-specific ptrace requests */
#define COMPAT_PTRACE_GETREGS 12
#define COMPAT_PTRACE_SETREGS 13
@@ -51,6 +51,14 @@
#define PSR_N_BIT 0x80000000
/*
+ * This is the GIC interrupt mask bit. It is not actually part of the
+ * PSR, we are simply using some reserved bits in the PSR to store some state
+ * from the interrupt controller. The context save/restore functions will
+ * extract the ICC_PMR_EL1_G_BIT and save it as the PSR_G_BIT.
+ */
+#define PSR_G_BIT 0x00400000
+
+/*
* Groups of PSR bits
*/
#define PSR_f 0xff000000 /* Flags */
@@ -20,6 +20,7 @@
#include <linux/init.h>
#include <linux/linkage.h>
+#include <linux/irqchip/arm-gic-v3.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
@@ -94,6 +95,26 @@
.endif
mrs x22, elr_el1
mrs x23, spsr_el1
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ /*
+ * Save the context held in the PMR register and copy the current
+ * I bit state to the PMR. Re-enable of the I bit happens in later
+ * code that knows what type of trap we are handling.
+ */
+ mrs_s x20, ICC_PMR_EL1 // Get PMR
+ and x20, x20, #ICC_PMR_EL1_G_BIT // Extract mask bit
+ lsl x20, x20, #PSR_G_PMR_G_SHIFT // Shift to a PSTATE RES0 bit
+ eor x20, x20, #PSR_G_BIT // Invert bit
+ orr x23, x20, x23 // Store PMR within PSTATE
+ orr x20, x23, #PSR_I_BIT // Extract I bit
+ .if PSR_I_PMR_G_SHIFT != 0
+ lsr x20, x20, #PSR_I_PMR_G_SHIFT // Shift down to meet mask bit
+ .endif
+ eor x20, x20, #ICC_PMR_EL1_UNMASKED // If I set: 0xb0 else: 0xf0
+ msr_s ICC_PMR_EL1, x20 // Write to PMR
+ isb
+#endif
+
stp lr, x21, [sp, #S_LR]
stp x22, x23, [sp, #S_PC]
@@ -121,6 +142,18 @@
ldr x23, [sp, #S_SP] // load return stack pointer
msr sp_el0, x23
.endif
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ /*
+ * Restore the context to the PMR (and ensure the reserved bit is
+ * restored to zero before being copied back to the PSR).
+ */
+ and x20, x22, #PSR_G_BIT // Get stolen PSTATE bit
+ and x22, x22, #~PSR_G_BIT // Clear stolen bit
+ lsr x20, x20, #PSR_G_PMR_G_SHIFT // Shift back to PMR mask
+ eor x20, x20, #ICC_PMR_EL1_UNMASKED // x20 gets 0xf0 or 0xb0
+ msr_s ICC_PMR_EL1, x20 // Write to PMR
+ isb
+#endif
msr elr_el1, x21 // set up the return data
msr spsr_el1, x22
.if \ret
@@ -288,16 +321,22 @@ el1_da:
* Data abort handling
*/
mrs x0, far_el1
+ enable_nmi
enable_dbg
// re-enable interrupts if they were enabled in the aborted context
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ tbnz x23, #PSR_G_SHIFT, 1f // PSR_G_BIT
+#else
tbnz x23, #7, 1f // PSR_I_BIT
- enable_irq
+#endif
+ enable_irq x2
1:
mov x2, sp // struct pt_regs
bl do_mem_abort
// disable interrupts before pulling preserved data off the stack
- disable_irq
+ disable_irq x21
+ disable_nmi
kernel_exit 1
el1_sp_pc:
/*
@@ -337,6 +376,7 @@ ENDPROC(el1_sync)
.align 6
el1_irq:
kernel_entry 1
+ enable_nmi
enable_dbg
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_off
@@ -356,6 +396,7 @@ el1_irq:
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_on
#endif
+ disable_nmi
kernel_exit 1
ENDPROC(el1_irq)
@@ -450,7 +491,8 @@ el0_da:
*/
mrs x26, far_el1
// enable interrupts before calling the main handler
- enable_dbg_and_irq
+ enable_nmi
+ enable_dbg_and_irq x0
ct_user_exit
bic x0, x26, #(0xff << 56)
mov x1, x25
@@ -463,7 +505,8 @@ el0_ia:
*/
mrs x26, far_el1
// enable interrupts before calling the main handler
- enable_dbg_and_irq
+ enable_nmi
+ enable_dbg_and_irq x0
ct_user_exit
mov x0, x26
orr x1, x25, #1 << 24 // use reserved ISS bit for instruction aborts
@@ -496,7 +539,8 @@ el0_sp_pc:
*/
mrs x26, far_el1
// enable interrupts before calling the main handler
- enable_dbg_and_irq
+ enable_nmi
+ enable_dbg_and_irq x0
mov x0, x26
mov x1, x25
mov x2, sp
@@ -507,7 +551,8 @@ el0_undef:
* Undefined instruction
*/
// enable interrupts before calling the main handler
- enable_dbg_and_irq
+ enable_nmi
+ enable_dbg_and_irq x0
ct_user_exit
mov x0, sp
bl do_undefinstr
@@ -538,6 +583,7 @@ ENDPROC(el0_sync)
el0_irq:
kernel_entry 0
el0_irq_naked:
+ enable_nmi
enable_dbg
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_off
@@ -587,11 +633,12 @@ ENDPROC(cpu_switch_to)
* and this includes saving x0 back into the kernel stack.
*/
ret_fast_syscall:
- disable_irq // disable interrupts
+ disable_irq x21 // disable interrupts
ldr x1, [tsk, #TI_FLAGS]
and x2, x1, #_TIF_WORK_MASK
cbnz x2, fast_work_pending
enable_step_tsk x1, x2
+ disable_nmi
kernel_exit 0, ret = 1
/*
@@ -606,7 +653,8 @@ work_pending:
mov x0, sp // 'regs'
tst x2, #PSR_MODE_MASK // user mode regs?
b.ne no_work_pending // returning to kernel
- enable_irq // enable interrupts for do_notify_resume()
+ enable_nmi
+ enable_irq x21 // enable interrupts for do_notify_resume()
bl do_notify_resume
b ret_to_user
work_resched:
@@ -616,12 +664,13 @@ work_resched:
* "slow" syscall return path.
*/
ret_to_user:
- disable_irq // disable interrupts
+ disable_irq x21 // disable interrupts
ldr x1, [tsk, #TI_FLAGS]
and x2, x1, #_TIF_WORK_MASK
cbnz x2, work_pending
enable_step_tsk x1, x2
no_work_pending:
+ disable_nmi
kernel_exit 0, ret = 0
ENDPROC(ret_to_user)
@@ -652,7 +701,8 @@ el0_svc:
adrp stbl, sys_call_table // load syscall table pointer
el0_svc_naked: // compat entry point
stp x0, scno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
- enable_dbg_and_irq
+ enable_nmi
+ enable_dbg_and_irq x16
ct_user_exit 1
ldr x16, [tsk, #TI_FLAGS] // check for syscall hooks
@@ -445,6 +445,30 @@ __switch_data:
.quad init_thread_union + THREAD_START_SP // sp
/*
+ * Conditional macro to enable interrupt controller system register access.
+ *
+ * Before we jump into generic code we must enable interrupt controller system
+ * register access because this is required by the irqflags macros. We must
+ * also mask interrupts at the PMR and unmask them within the PSR. That leaves
+ * us set up and ready for the kernel to make its first call to
+ * arch_local_irq_enable().
+ *
+ * Corrupts: tmp
+ */
+ .macro enable_icc_sysregs, tmp
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ mrs_s \tmp, ICC_SRE_EL1
+ orr \tmp, \tmp, #ICC_SRE_EL1_SRE
+ msr_s ICC_SRE_EL1, \tmp // Set ICC_SRE_EL1.SRE==1
+ isb // Make sure SRE is now set
+ mov \tmp, ICC_PMR_EL1_MASKED
+ msr_s ICC_PMR_EL1, \tmp // Prepare for unmask of I bit
+ isb
+ msr daifclr, #2 // Clear the I bit
+#endif
+ .endm
+
+/*
* The following fragment of code is executed with the MMU on in MMU mode, and
* uses absolute addresses; this is not position independent.
*/
@@ -464,6 +488,8 @@ __mmap_switched:
str x22, [x4] // Save processor ID
str x21, [x5] // Save FDT pointer
str x24, [x6] // Save PHYS_OFFSET
+
+ enable_icc_sysregs x29 // May be nop
mov x29, #0
b start_kernel
ENDPROC(__mmap_switched)
@@ -652,6 +678,7 @@ ENDPROC(secondary_startup)
ENTRY(__secondary_switched)
ldr x0, [x21] // get secondary_data.stack
mov sp, x0
+ enable_icc_sysregs x29 // may be nop
mov x29, #0
b secondary_start_kernel
ENDPROC(__secondary_switched)
@@ -46,10 +46,12 @@ loop1:
and x1, x1, #7 // mask of the bits for current cache only
cmp x1, #2 // see what cache we have at this level
b.lt skip // skip if no cache, or just i-cache
- save_and_disable_irqs x9 // make CSSELR and CCSIDR access atomic
+ save_and_disable_irqs x9, x4 // make CSSELR and CCSIDR access atomic
+ save_and_disable_nmis x4
msr csselr_el1, x10 // select current cache level in csselr
isb // isb to sych the new cssr&csidr
mrs x1, ccsidr_el1 // read the new ccsidr
+ restore_nmis x4
restore_irqs x9
and x2, x1, #7 // extract the length of the cache lines
add x2, x2, #4 // add 4 (line length offset)
@@ -20,6 +20,7 @@
#include <linux/init.h>
#include <linux/linkage.h>
+#include <linux/irqchip/arm-gic-v3.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/hwcap.h>
@@ -95,10 +96,28 @@ ENDPROC(cpu_soft_restart)
* cpu_do_idle()
*
* Idle the processor (wait for interrupt).
+ *
+ * If CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS is set we must do additional
+ * work to ensure that interrupts are not masked at the PMR (because the
+ * core will not wake up if we block the wake up signal in the interrupt
+ * controller).
*/
ENTRY(cpu_do_idle)
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ mrs x0, daif // save I bit
+ msr daifset, #2 // set I bit
+ mrs_s x1, ICC_PMR_EL1 // save PMR
+ mov x2, #ICC_PMR_EL1_UNMASKED
+ msr_s ICC_PMR_EL1, x2 // unmask at PMR
+ isb
+#endif
dsb sy // WFI may enter a low-power mode
wfi
+#ifdef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
+ msr_s ICC_PMR_EL1, x1 // restore PMR
+ isb
+ msr daif, x0 // restore I bit
+#endif
ret
ENDPROC(cpu_do_idle)
@@ -110,8 +110,33 @@ static void gic_redist_wait_for_rwp(void)
static u64 __maybe_unused gic_read_iar(void)
{
u64 irqstat;
+ u64 __maybe_unused daif;
+ u64 __maybe_unused pmr;
+ u64 __maybe_unused default_pmr_value = DEFAULT_PMR_VALUE;
+#ifndef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
asm volatile("mrs_s %0, " __stringify(ICC_IAR1_EL1) : "=r" (irqstat));
+#else
+ /*
+ * The PMR may be configured to mask interrupts when this code is
+ * called, thus in order to acknowledge interrupts we must set the
+ * PMR to its default value before reading from the IAR.
+ *
+ * To do this without taking an interrupt we also ensure the I bit
+ * is set whilst we are interfering with the value of the PMR.
+ */
+ asm volatile(
+ "mrs %1, daif\n" /* save I bit */
+ "msr daifset, #2\n" /* set I bit */
+ "mrs_s %2, " __stringify(ICC_PMR_EL1) "\n" /* save PMR */
+ "msr_s " __stringify(ICC_PMR_EL1) ",%3\n" /* set PMR */
+ "mrs_s %0, " __stringify(ICC_IAR1_EL1) "\n" /* ack int */
+ "msr_s " __stringify(ICC_PMR_EL1) ",%2\n" /* restore PMR */
+ "isb\n"
+ "msr daif, %1" /* restore I */
+ : "=r" (irqstat), "=&r" (daif), "=&r" (pmr)
+ : "r" (default_pmr_value));
+#endif
return irqstat;
}
@@ -142,7 +167,7 @@ static void __maybe_unused gic_write_sgi1r(u64 val)
asm volatile("msr_s " __stringify(ICC_SGI1R_EL1) ", %0" : : "r" (val));
}
-static void gic_enable_sre(void)
+static void __maybe_unused gic_enable_sre(void)
{
u64 val;
@@ -382,11 +407,13 @@ static int gic_populate_rdist(void)
static void gic_cpu_sys_reg_init(void)
{
+#ifndef CONFIG_USE_ICC_SYSREGS_FOR_IRQFLAGS
/* Enable system registers */
gic_enable_sre();
/* Set priority mask register */
gic_write_pmr(DEFAULT_PMR_VALUE);
+#endif
/*
* On FVP, CPU 0 arrives in the kernel with its BPR changed from the
@@ -242,7 +242,7 @@
*/
#define ICC_CTLR_EL1_EOImode_drop_dir (0U << 1)
#define ICC_CTLR_EL1_EOImode_drop (1U << 1)
-#define ICC_SRE_EL1_SRE (1U << 0)
+#define ICC_SRE_EL1_SRE (1 << 0)
/*
* Hypervisor interface registers (SRE only)
@@ -346,6 +346,8 @@
#include <linux/stringify.h>
+struct device_node;
+
/*
* We need a value to serve as a irq-type for LPIs. Choose one that will
* hopefully pique the interest of the reviewer.
@@ -49,7 +49,7 @@
#define GICD_INT_EN_CLR_X32 0xffffffff
#define GICD_INT_EN_SET_SGI 0x0000ffff
#define GICD_INT_EN_CLR_PPI 0xffff0000
-#define GICD_INT_DEF_PRI 0xa0
+#define GICD_INT_DEF_PRI 0xc0
#define GICD_INT_DEF_PRI_X4 ((GICD_INT_DEF_PRI << 24) |\
(GICD_INT_DEF_PRI << 16) |\
(GICD_INT_DEF_PRI << 8) |\
Currently irqflags is implemented using the PSR's I bit. It is possible to implement irqflags by using the co-processor interface to the GIC. Using the co-processor interface makes it feasible to simulate NMIs using GIC interrupt prioritization. This patch changes the irqflags macros to modify, save and restore ICC_PMR_EL1. This has a substantial knock on effect for the rest of the kernel. There are three reasons for this: 1. The state of the ICC_PMR_EL1_G_BIT becomes part of the CPU context and must be saved and restored during traps. To simplify the additional context management the ICC_PMR_EL1_G_BIT is converted into a fake (reserved) bit within the PSR (PSR_G_BIT). Naturally this approach will need to be changed if future ARM architecture extensions make use of this bit. 2. The hardware automatically masks the I bit (at boot, during traps, etc). When the I bit is set by hardware we must add code to switch from I bit masking and PMR masking. 3. Some instructions, noteably wfi, require that the PMR not be used for interrupt masking. Before calling these instructions we must switch from PMR masking to I bit masking. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> --- arch/arm64/Kconfig | 15 ++++++ arch/arm64/include/asm/assembler.h | 72 ++++++++++++++++++++++++++--- arch/arm64/include/asm/irqflags.h | 89 ++++++++++++++++++++++++++++++++++++ arch/arm64/include/asm/ptrace.h | 10 ++++ arch/arm64/include/uapi/asm/ptrace.h | 8 ++++ arch/arm64/kernel/entry.S | 70 ++++++++++++++++++++++++---- arch/arm64/kernel/head.S | 27 +++++++++++ arch/arm64/mm/cache.S | 4 +- arch/arm64/mm/proc.S | 19 ++++++++ drivers/irqchip/irq-gic-v3.c | 29 +++++++++++- include/linux/irqchip/arm-gic-v3.h | 4 +- include/linux/irqchip/arm-gic.h | 2 +- 12 files changed, 329 insertions(+), 20 deletions(-)