| Message ID | 1427868203-7486-2-git-send-email-wens@csie.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, 01 Apr 2015, Chen-Yu Tsai wrote: > From: Boris BREZILLON <boris.brezillon@free-electrons.com> > > Add support for the AXP22x PMIC devices to the existing AXP20x driver. > This includes the AXP221 and AXP223, which are identical except for > the external data bus. Only AXP221 is added for now. AXP223 will be > added after it's Reduced Serial Bus (RSB) interface is supported. > > AXP22x defines a new set of registers, power supplies and regulators, > but most of the API is similar to the AXP20x ones. > > A new irq chip definition is used, even though the available interrupts > on AXP22x is a subset of those on AXP20x. This is done so the interrupt > numbers match those on the datasheet. > > This patch only enables the interrupts, system power-off function, and PEK > sub-device. The regulator driver must first support different variants > before we enable it from the mfd driver. > > Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> > [wens@csie.org: fix interrupts and move regulators to separate patch] > Signed-off-by: Chen-Yu Tsai <wens@csie.org> > Acked-by: Lee Jones <lee.jones@linaro.org> > --- > drivers/mfd/axp20x.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++ > include/linux/mfd/axp20x.h | 86 ++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 184 insertions(+) Acked-by: Lee Jones <lee.jones@linaro.org> What's happening with this set by the way? > diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c > index 1386826f713d..58573a5f73de 100644 > --- a/drivers/mfd/axp20x.c > +++ b/drivers/mfd/axp20x.c > @@ -32,6 +32,7 @@ > static const char * const axp20x_model_names[] = { > "AXP202", > "AXP209", > + "AXP221", > "AXP288", > }; > > @@ -54,6 +55,25 @@ static const struct regmap_access_table axp20x_volatile_table = { > .n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges), > }; > > +static const struct regmap_range axp22x_writeable_ranges[] = { > + regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), > + regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1), > +}; > + > +static const struct regmap_range axp22x_volatile_ranges[] = { > + regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE), > +}; > + > +static const struct regmap_access_table axp22x_writeable_table = { > + .yes_ranges = axp22x_writeable_ranges, > + .n_yes_ranges = ARRAY_SIZE(axp22x_writeable_ranges), > +}; > + > +static const struct regmap_access_table axp22x_volatile_table = { > + .yes_ranges = axp22x_volatile_ranges, > + .n_yes_ranges = ARRAY_SIZE(axp22x_volatile_ranges), > +}; > + > static const struct regmap_range axp288_writeable_ranges[] = { > regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE), > regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5), > @@ -87,6 +107,20 @@ static struct resource axp20x_pek_resources[] = { > }, > }; > > +static struct resource axp22x_pek_resources[] = { > + { > + .name = "PEK_DBR", > + .start = AXP22X_IRQ_PEK_RIS_EDGE, > + .end = AXP22X_IRQ_PEK_RIS_EDGE, > + .flags = IORESOURCE_IRQ, > + }, { > + .name = "PEK_DBF", > + .start = AXP22X_IRQ_PEK_FAL_EDGE, > + .end = AXP22X_IRQ_PEK_FAL_EDGE, > + .flags = IORESOURCE_IRQ, > + }, > +}; > + > static struct resource axp288_fuel_gauge_resources[] = { > { > .start = AXP288_IRQ_QWBTU, > @@ -129,6 +163,15 @@ static const struct regmap_config axp20x_regmap_config = { > .cache_type = REGCACHE_RBTREE, > }; > > +static const struct regmap_config axp22x_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + .wr_table = &axp22x_writeable_table, > + .volatile_table = &axp22x_volatile_table, > + .max_register = AXP22X_BATLOW_THRES1, > + .cache_type = REGCACHE_RBTREE, > +}; > + > static const struct regmap_config axp288_regmap_config = { > .reg_bits = 8, > .val_bits = 8, > @@ -181,6 +224,34 @@ static const struct regmap_irq axp20x_regmap_irqs[] = { > INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0), > }; > > +static const struct regmap_irq axp22x_regmap_irqs[] = { > + INIT_REGMAP_IRQ(AXP22X, ACIN_OVER_V, 0, 7), > + INIT_REGMAP_IRQ(AXP22X, ACIN_PLUGIN, 0, 6), > + INIT_REGMAP_IRQ(AXP22X, ACIN_REMOVAL, 0, 5), > + INIT_REGMAP_IRQ(AXP22X, VBUS_OVER_V, 0, 4), > + INIT_REGMAP_IRQ(AXP22X, VBUS_PLUGIN, 0, 3), > + INIT_REGMAP_IRQ(AXP22X, VBUS_REMOVAL, 0, 2), > + INIT_REGMAP_IRQ(AXP22X, VBUS_V_LOW, 0, 1), > + INIT_REGMAP_IRQ(AXP22X, BATT_PLUGIN, 1, 7), > + INIT_REGMAP_IRQ(AXP22X, BATT_REMOVAL, 1, 6), > + INIT_REGMAP_IRQ(AXP22X, BATT_ENT_ACT_MODE, 1, 5), > + INIT_REGMAP_IRQ(AXP22X, BATT_EXIT_ACT_MODE, 1, 4), > + INIT_REGMAP_IRQ(AXP22X, CHARG, 1, 3), > + INIT_REGMAP_IRQ(AXP22X, CHARG_DONE, 1, 2), > + INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_HIGH, 1, 1), > + INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_LOW, 1, 0), > + INIT_REGMAP_IRQ(AXP22X, DIE_TEMP_HIGH, 2, 7), > + INIT_REGMAP_IRQ(AXP22X, PEK_SHORT, 2, 1), > + INIT_REGMAP_IRQ(AXP22X, PEK_LONG, 2, 0), > + INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL1, 3, 1), > + INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL2, 3, 0), > + INIT_REGMAP_IRQ(AXP22X, TIMER, 4, 7), > + INIT_REGMAP_IRQ(AXP22X, PEK_RIS_EDGE, 4, 6), > + INIT_REGMAP_IRQ(AXP22X, PEK_FAL_EDGE, 4, 5), > + INIT_REGMAP_IRQ(AXP22X, GPIO1_INPUT, 4, 1), > + INIT_REGMAP_IRQ(AXP22X, GPIO0_INPUT, 4, 0), > +}; > + > /* some IRQs are compatible with axp20x models */ > static const struct regmap_irq axp288_regmap_irqs[] = { > INIT_REGMAP_IRQ(AXP288, VBUS_FALL, 0, 2), > @@ -224,6 +295,7 @@ static const struct regmap_irq axp288_regmap_irqs[] = { > static const struct of_device_id axp20x_of_match[] = { > { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID }, > { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID }, > + { .compatible = "x-powers,axp221", .data = (void *) AXP221_ID }, > { }, > }; > MODULE_DEVICE_TABLE(of, axp20x_of_match); > @@ -258,6 +330,18 @@ static const struct regmap_irq_chip axp20x_regmap_irq_chip = { > > }; > > +static const struct regmap_irq_chip axp22x_regmap_irq_chip = { > + .name = "axp22x_irq_chip", > + .status_base = AXP20X_IRQ1_STATE, > + .ack_base = AXP20X_IRQ1_STATE, > + .mask_base = AXP20X_IRQ1_EN, > + .mask_invert = true, > + .init_ack_masked = true, > + .irqs = axp22x_regmap_irqs, > + .num_irqs = ARRAY_SIZE(axp22x_regmap_irqs), > + .num_regs = 5, > +}; > + > static const struct regmap_irq_chip axp288_regmap_irq_chip = { > .name = "axp288_irq_chip", > .status_base = AXP20X_IRQ1_STATE, > @@ -281,6 +365,14 @@ static struct mfd_cell axp20x_cells[] = { > }, > }; > > +static struct mfd_cell axp22x_cells[] = { > + { > + .name = "axp20x-pek", > + .num_resources = ARRAY_SIZE(axp22x_pek_resources), > + .resources = axp22x_pek_resources, > + }, > +}; > + > static struct resource axp288_adc_resources[] = { > { > .name = "GPADC", > @@ -398,6 +490,12 @@ static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev) > axp20x->regmap_cfg = &axp20x_regmap_config; > axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip; > break; > + case AXP221_ID: > + axp20x->nr_cells = ARRAY_SIZE(axp22x_cells); > + axp20x->cells = axp22x_cells; > + axp20x->regmap_cfg = &axp22x_regmap_config; > + axp20x->regmap_irq_chip = &axp22x_regmap_irq_chip; > + break; > case AXP288_ID: > axp20x->cells = axp288_cells; > axp20x->nr_cells = ARRAY_SIZE(axp288_cells); > diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h > index dfabd6db7ddf..95568eb798c3 100644 > --- a/include/linux/mfd/axp20x.h > +++ b/include/linux/mfd/axp20x.h > @@ -14,6 +14,7 @@ > enum { > AXP202_ID = 0, > AXP209_ID, > + AXP221_ID, > AXP288_ID, > NR_AXP20X_VARIANTS, > }; > @@ -45,6 +46,28 @@ enum { > #define AXP20X_V_LTF_DISCHRG 0x3c > #define AXP20X_V_HTF_DISCHRG 0x3d > > +#define AXP22X_PWR_OUT_CTRL1 0x10 > +#define AXP22X_PWR_OUT_CTRL2 0x12 > +#define AXP22X_PWR_OUT_CTRL3 0x13 > +#define AXP22X_DLDO1_V_OUT 0x15 > +#define AXP22X_DLDO2_V_OUT 0x16 > +#define AXP22X_DLDO3_V_OUT 0x17 > +#define AXP22X_DLDO4_V_OUT 0x18 > +#define AXP22X_ELDO1_V_OUT 0x19 > +#define AXP22X_ELDO2_V_OUT 0x1a > +#define AXP22X_ELDO3_V_OUT 0x1b > +#define AXP22X_DC5LDO_V_OUT 0x1c > +#define AXP22X_DCDC1_V_OUT 0x21 > +#define AXP22X_DCDC2_V_OUT 0x22 > +#define AXP22X_DCDC3_V_OUT 0x23 > +#define AXP22X_DCDC4_V_OUT 0x24 > +#define AXP22X_DCDC5_V_OUT 0x25 > +#define AXP22X_DCDC23_V_RAMP_CTRL 0x27 > +#define AXP22X_ALDO1_V_OUT 0x28 > +#define AXP22X_ALDO2_V_OUT 0x29 > +#define AXP22X_ALDO3_V_OUT 0x2a > +#define AXP22X_CHRG_CTRL3 0x35 > + > /* Interrupt */ > #define AXP20X_IRQ1_EN 0x40 > #define AXP20X_IRQ2_EN 0x41 > @@ -100,6 +123,9 @@ enum { > #define AXP20X_VBUS_MON 0x8b > #define AXP20X_OVER_TMP 0x8f > > +#define AXP22X_PWREN_CTRL1 0x8c > +#define AXP22X_PWREN_CTRL2 0x8d > + > /* GPIO */ > #define AXP20X_GPIO0_CTRL 0x90 > #define AXP20X_LDO5_V_OUT 0x91 > @@ -108,6 +134,11 @@ enum { > #define AXP20X_GPIO20_SS 0x94 > #define AXP20X_GPIO3_CTRL 0x95 > > +#define AXP22X_LDO_IO0_V_OUT 0x91 > +#define AXP22X_LDO_IO1_V_OUT 0x93 > +#define AXP22X_GPIO_STATE 0x94 > +#define AXP22X_GPIO_PULL_DOWN 0x95 > + > /* Battery */ > #define AXP20X_CHRG_CC_31_24 0xb0 > #define AXP20X_CHRG_CC_23_16 0xb1 > @@ -120,6 +151,9 @@ enum { > #define AXP20X_CC_CTRL 0xb8 > #define AXP20X_FG_RES 0xb9 > > +/* AXP22X specific registers */ > +#define AXP22X_BATLOW_THRES1 0xe6 > + > /* AXP288 specific registers */ > #define AXP288_PMIC_ADC_H 0x56 > #define AXP288_PMIC_ADC_L 0x57 > @@ -158,6 +192,30 @@ enum { > AXP20X_REG_ID_MAX, > }; > > +enum { > + AXP22X_DCDC1 = 0, > + AXP22X_DCDC2, > + AXP22X_DCDC3, > + AXP22X_DCDC4, > + AXP22X_DCDC5, > + AXP22X_DC1SW, > + AXP22X_DC5LDO, > + AXP22X_ALDO1, > + AXP22X_ALDO2, > + AXP22X_ALDO3, > + AXP22X_ELDO1, > + AXP22X_ELDO2, > + AXP22X_ELDO3, > + AXP22X_DLDO1, > + AXP22X_DLDO2, > + AXP22X_DLDO3, > + AXP22X_DLDO4, > + AXP22X_RTC_LDO, > + AXP22X_LDO_IO0, > + AXP22X_LDO_IO1, > + AXP22X_REG_ID_MAX, > +}; > + > /* IRQs */ > enum { > AXP20X_IRQ_ACIN_OVER_V = 1, > @@ -199,6 +257,34 @@ enum { > AXP20X_IRQ_GPIO0_INPUT, > }; > > +enum axp22x_irqs { > + AXP22X_IRQ_ACIN_OVER_V = 1, > + AXP22X_IRQ_ACIN_PLUGIN, > + AXP22X_IRQ_ACIN_REMOVAL, > + AXP22X_IRQ_VBUS_OVER_V, > + AXP22X_IRQ_VBUS_PLUGIN, > + AXP22X_IRQ_VBUS_REMOVAL, > + AXP22X_IRQ_VBUS_V_LOW, > + AXP22X_IRQ_BATT_PLUGIN, > + AXP22X_IRQ_BATT_REMOVAL, > + AXP22X_IRQ_BATT_ENT_ACT_MODE, > + AXP22X_IRQ_BATT_EXIT_ACT_MODE, > + AXP22X_IRQ_CHARG, > + AXP22X_IRQ_CHARG_DONE, > + AXP22X_IRQ_BATT_TEMP_HIGH, > + AXP22X_IRQ_BATT_TEMP_LOW, > + AXP22X_IRQ_DIE_TEMP_HIGH, > + AXP22X_IRQ_PEK_SHORT, > + AXP22X_IRQ_PEK_LONG, > + AXP22X_IRQ_LOW_PWR_LVL1, > + AXP22X_IRQ_LOW_PWR_LVL2, > + AXP22X_IRQ_TIMER, > + AXP22X_IRQ_PEK_RIS_EDGE, > + AXP22X_IRQ_PEK_FAL_EDGE, > + AXP22X_IRQ_GPIO1_INPUT, > + AXP22X_IRQ_GPIO0_INPUT, > +}; > + > enum axp288_irqs { > AXP288_IRQ_VBUS_FALL = 2, > AXP288_IRQ_VBUS_RISE,
On Wed, Apr 1, 2015 at 12:12 AM, Lee Jones <lee.jones@linaro.org> wrote: > On Wed, 01 Apr 2015, Chen-Yu Tsai wrote: > >> From: Boris BREZILLON <boris.brezillon@free-electrons.com> >> >> Add support for the AXP22x PMIC devices to the existing AXP20x driver. >> This includes the AXP221 and AXP223, which are identical except for >> the external data bus. Only AXP221 is added for now. AXP223 will be >> added after it's Reduced Serial Bus (RSB) interface is supported. >> >> AXP22x defines a new set of registers, power supplies and regulators, >> but most of the API is similar to the AXP20x ones. >> >> A new irq chip definition is used, even though the available interrupts >> on AXP22x is a subset of those on AXP20x. This is done so the interrupt >> numbers match those on the datasheet. >> >> This patch only enables the interrupts, system power-off function, and PEK >> sub-device. The regulator driver must first support different variants >> before we enable it from the mfd driver. >> >> Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> >> [wens@csie.org: fix interrupts and move regulators to separate patch] >> Signed-off-by: Chen-Yu Tsai <wens@csie.org> >> Acked-by: Lee Jones <lee.jones@linaro.org> >> --- >> drivers/mfd/axp20x.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++ >> include/linux/mfd/axp20x.h | 86 ++++++++++++++++++++++++++++++++++++++++ >> 2 files changed, 184 insertions(+) > > Acked-by: Lee Jones <lee.jones@linaro.org> > > What's happening with this set by the way? I'm hoping you can take all six patches through your tree. Mark seems fine with the regulator bits. He even tried to merge them, but they depend on the axp20x mfd header changes. ChenYu >> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c >> index 1386826f713d..58573a5f73de 100644 >> --- a/drivers/mfd/axp20x.c >> +++ b/drivers/mfd/axp20x.c >> @@ -32,6 +32,7 @@ >> static const char * const axp20x_model_names[] = { >> "AXP202", >> "AXP209", >> + "AXP221", >> "AXP288", >> }; >> >> @@ -54,6 +55,25 @@ static const struct regmap_access_table axp20x_volatile_table = { >> .n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges), >> }; >> >> +static const struct regmap_range axp22x_writeable_ranges[] = { >> + regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), >> + regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1), >> +}; >> + >> +static const struct regmap_range axp22x_volatile_ranges[] = { >> + regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE), >> +}; >> + >> +static const struct regmap_access_table axp22x_writeable_table = { >> + .yes_ranges = axp22x_writeable_ranges, >> + .n_yes_ranges = ARRAY_SIZE(axp22x_writeable_ranges), >> +}; >> + >> +static const struct regmap_access_table axp22x_volatile_table = { >> + .yes_ranges = axp22x_volatile_ranges, >> + .n_yes_ranges = ARRAY_SIZE(axp22x_volatile_ranges), >> +}; >> + >> static const struct regmap_range axp288_writeable_ranges[] = { >> regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE), >> regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5), >> @@ -87,6 +107,20 @@ static struct resource axp20x_pek_resources[] = { >> }, >> }; >> >> +static struct resource axp22x_pek_resources[] = { >> + { >> + .name = "PEK_DBR", >> + .start = AXP22X_IRQ_PEK_RIS_EDGE, >> + .end = AXP22X_IRQ_PEK_RIS_EDGE, >> + .flags = IORESOURCE_IRQ, >> + }, { >> + .name = "PEK_DBF", >> + .start = AXP22X_IRQ_PEK_FAL_EDGE, >> + .end = AXP22X_IRQ_PEK_FAL_EDGE, >> + .flags = IORESOURCE_IRQ, >> + }, >> +}; >> + >> static struct resource axp288_fuel_gauge_resources[] = { >> { >> .start = AXP288_IRQ_QWBTU, >> @@ -129,6 +163,15 @@ static const struct regmap_config axp20x_regmap_config = { >> .cache_type = REGCACHE_RBTREE, >> }; >> >> +static const struct regmap_config axp22x_regmap_config = { >> + .reg_bits = 8, >> + .val_bits = 8, >> + .wr_table = &axp22x_writeable_table, >> + .volatile_table = &axp22x_volatile_table, >> + .max_register = AXP22X_BATLOW_THRES1, >> + .cache_type = REGCACHE_RBTREE, >> +}; >> + >> static const struct regmap_config axp288_regmap_config = { >> .reg_bits = 8, >> .val_bits = 8, >> @@ -181,6 +224,34 @@ static const struct regmap_irq axp20x_regmap_irqs[] = { >> INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0), >> }; >> >> +static const struct regmap_irq axp22x_regmap_irqs[] = { >> + INIT_REGMAP_IRQ(AXP22X, ACIN_OVER_V, 0, 7), >> + INIT_REGMAP_IRQ(AXP22X, ACIN_PLUGIN, 0, 6), >> + INIT_REGMAP_IRQ(AXP22X, ACIN_REMOVAL, 0, 5), >> + INIT_REGMAP_IRQ(AXP22X, VBUS_OVER_V, 0, 4), >> + INIT_REGMAP_IRQ(AXP22X, VBUS_PLUGIN, 0, 3), >> + INIT_REGMAP_IRQ(AXP22X, VBUS_REMOVAL, 0, 2), >> + INIT_REGMAP_IRQ(AXP22X, VBUS_V_LOW, 0, 1), >> + INIT_REGMAP_IRQ(AXP22X, BATT_PLUGIN, 1, 7), >> + INIT_REGMAP_IRQ(AXP22X, BATT_REMOVAL, 1, 6), >> + INIT_REGMAP_IRQ(AXP22X, BATT_ENT_ACT_MODE, 1, 5), >> + INIT_REGMAP_IRQ(AXP22X, BATT_EXIT_ACT_MODE, 1, 4), >> + INIT_REGMAP_IRQ(AXP22X, CHARG, 1, 3), >> + INIT_REGMAP_IRQ(AXP22X, CHARG_DONE, 1, 2), >> + INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_HIGH, 1, 1), >> + INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_LOW, 1, 0), >> + INIT_REGMAP_IRQ(AXP22X, DIE_TEMP_HIGH, 2, 7), >> + INIT_REGMAP_IRQ(AXP22X, PEK_SHORT, 2, 1), >> + INIT_REGMAP_IRQ(AXP22X, PEK_LONG, 2, 0), >> + INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL1, 3, 1), >> + INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL2, 3, 0), >> + INIT_REGMAP_IRQ(AXP22X, TIMER, 4, 7), >> + INIT_REGMAP_IRQ(AXP22X, PEK_RIS_EDGE, 4, 6), >> + INIT_REGMAP_IRQ(AXP22X, PEK_FAL_EDGE, 4, 5), >> + INIT_REGMAP_IRQ(AXP22X, GPIO1_INPUT, 4, 1), >> + INIT_REGMAP_IRQ(AXP22X, GPIO0_INPUT, 4, 0), >> +}; >> + >> /* some IRQs are compatible with axp20x models */ >> static const struct regmap_irq axp288_regmap_irqs[] = { >> INIT_REGMAP_IRQ(AXP288, VBUS_FALL, 0, 2), >> @@ -224,6 +295,7 @@ static const struct regmap_irq axp288_regmap_irqs[] = { >> static const struct of_device_id axp20x_of_match[] = { >> { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID }, >> { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID }, >> + { .compatible = "x-powers,axp221", .data = (void *) AXP221_ID }, >> { }, >> }; >> MODULE_DEVICE_TABLE(of, axp20x_of_match); >> @@ -258,6 +330,18 @@ static const struct regmap_irq_chip axp20x_regmap_irq_chip = { >> >> }; >> >> +static const struct regmap_irq_chip axp22x_regmap_irq_chip = { >> + .name = "axp22x_irq_chip", >> + .status_base = AXP20X_IRQ1_STATE, >> + .ack_base = AXP20X_IRQ1_STATE, >> + .mask_base = AXP20X_IRQ1_EN, >> + .mask_invert = true, >> + .init_ack_masked = true, >> + .irqs = axp22x_regmap_irqs, >> + .num_irqs = ARRAY_SIZE(axp22x_regmap_irqs), >> + .num_regs = 5, >> +}; >> + >> static const struct regmap_irq_chip axp288_regmap_irq_chip = { >> .name = "axp288_irq_chip", >> .status_base = AXP20X_IRQ1_STATE, >> @@ -281,6 +365,14 @@ static struct mfd_cell axp20x_cells[] = { >> }, >> }; >> >> +static struct mfd_cell axp22x_cells[] = { >> + { >> + .name = "axp20x-pek", >> + .num_resources = ARRAY_SIZE(axp22x_pek_resources), >> + .resources = axp22x_pek_resources, >> + }, >> +}; >> + >> static struct resource axp288_adc_resources[] = { >> { >> .name = "GPADC", >> @@ -398,6 +490,12 @@ static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev) >> axp20x->regmap_cfg = &axp20x_regmap_config; >> axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip; >> break; >> + case AXP221_ID: >> + axp20x->nr_cells = ARRAY_SIZE(axp22x_cells); >> + axp20x->cells = axp22x_cells; >> + axp20x->regmap_cfg = &axp22x_regmap_config; >> + axp20x->regmap_irq_chip = &axp22x_regmap_irq_chip; >> + break; >> case AXP288_ID: >> axp20x->cells = axp288_cells; >> axp20x->nr_cells = ARRAY_SIZE(axp288_cells); >> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h >> index dfabd6db7ddf..95568eb798c3 100644 >> --- a/include/linux/mfd/axp20x.h >> +++ b/include/linux/mfd/axp20x.h >> @@ -14,6 +14,7 @@ >> enum { >> AXP202_ID = 0, >> AXP209_ID, >> + AXP221_ID, >> AXP288_ID, >> NR_AXP20X_VARIANTS, >> }; >> @@ -45,6 +46,28 @@ enum { >> #define AXP20X_V_LTF_DISCHRG 0x3c >> #define AXP20X_V_HTF_DISCHRG 0x3d >> >> +#define AXP22X_PWR_OUT_CTRL1 0x10 >> +#define AXP22X_PWR_OUT_CTRL2 0x12 >> +#define AXP22X_PWR_OUT_CTRL3 0x13 >> +#define AXP22X_DLDO1_V_OUT 0x15 >> +#define AXP22X_DLDO2_V_OUT 0x16 >> +#define AXP22X_DLDO3_V_OUT 0x17 >> +#define AXP22X_DLDO4_V_OUT 0x18 >> +#define AXP22X_ELDO1_V_OUT 0x19 >> +#define AXP22X_ELDO2_V_OUT 0x1a >> +#define AXP22X_ELDO3_V_OUT 0x1b >> +#define AXP22X_DC5LDO_V_OUT 0x1c >> +#define AXP22X_DCDC1_V_OUT 0x21 >> +#define AXP22X_DCDC2_V_OUT 0x22 >> +#define AXP22X_DCDC3_V_OUT 0x23 >> +#define AXP22X_DCDC4_V_OUT 0x24 >> +#define AXP22X_DCDC5_V_OUT 0x25 >> +#define AXP22X_DCDC23_V_RAMP_CTRL 0x27 >> +#define AXP22X_ALDO1_V_OUT 0x28 >> +#define AXP22X_ALDO2_V_OUT 0x29 >> +#define AXP22X_ALDO3_V_OUT 0x2a >> +#define AXP22X_CHRG_CTRL3 0x35 >> + >> /* Interrupt */ >> #define AXP20X_IRQ1_EN 0x40 >> #define AXP20X_IRQ2_EN 0x41 >> @@ -100,6 +123,9 @@ enum { >> #define AXP20X_VBUS_MON 0x8b >> #define AXP20X_OVER_TMP 0x8f >> >> +#define AXP22X_PWREN_CTRL1 0x8c >> +#define AXP22X_PWREN_CTRL2 0x8d >> + >> /* GPIO */ >> #define AXP20X_GPIO0_CTRL 0x90 >> #define AXP20X_LDO5_V_OUT 0x91 >> @@ -108,6 +134,11 @@ enum { >> #define AXP20X_GPIO20_SS 0x94 >> #define AXP20X_GPIO3_CTRL 0x95 >> >> +#define AXP22X_LDO_IO0_V_OUT 0x91 >> +#define AXP22X_LDO_IO1_V_OUT 0x93 >> +#define AXP22X_GPIO_STATE 0x94 >> +#define AXP22X_GPIO_PULL_DOWN 0x95 >> + >> /* Battery */ >> #define AXP20X_CHRG_CC_31_24 0xb0 >> #define AXP20X_CHRG_CC_23_16 0xb1 >> @@ -120,6 +151,9 @@ enum { >> #define AXP20X_CC_CTRL 0xb8 >> #define AXP20X_FG_RES 0xb9 >> >> +/* AXP22X specific registers */ >> +#define AXP22X_BATLOW_THRES1 0xe6 >> + >> /* AXP288 specific registers */ >> #define AXP288_PMIC_ADC_H 0x56 >> #define AXP288_PMIC_ADC_L 0x57 >> @@ -158,6 +192,30 @@ enum { >> AXP20X_REG_ID_MAX, >> }; >> >> +enum { >> + AXP22X_DCDC1 = 0, >> + AXP22X_DCDC2, >> + AXP22X_DCDC3, >> + AXP22X_DCDC4, >> + AXP22X_DCDC5, >> + AXP22X_DC1SW, >> + AXP22X_DC5LDO, >> + AXP22X_ALDO1, >> + AXP22X_ALDO2, >> + AXP22X_ALDO3, >> + AXP22X_ELDO1, >> + AXP22X_ELDO2, >> + AXP22X_ELDO3, >> + AXP22X_DLDO1, >> + AXP22X_DLDO2, >> + AXP22X_DLDO3, >> + AXP22X_DLDO4, >> + AXP22X_RTC_LDO, >> + AXP22X_LDO_IO0, >> + AXP22X_LDO_IO1, >> + AXP22X_REG_ID_MAX, >> +}; >> + >> /* IRQs */ >> enum { >> AXP20X_IRQ_ACIN_OVER_V = 1, >> @@ -199,6 +257,34 @@ enum { >> AXP20X_IRQ_GPIO0_INPUT, >> }; >> >> +enum axp22x_irqs { >> + AXP22X_IRQ_ACIN_OVER_V = 1, >> + AXP22X_IRQ_ACIN_PLUGIN, >> + AXP22X_IRQ_ACIN_REMOVAL, >> + AXP22X_IRQ_VBUS_OVER_V, >> + AXP22X_IRQ_VBUS_PLUGIN, >> + AXP22X_IRQ_VBUS_REMOVAL, >> + AXP22X_IRQ_VBUS_V_LOW, >> + AXP22X_IRQ_BATT_PLUGIN, >> + AXP22X_IRQ_BATT_REMOVAL, >> + AXP22X_IRQ_BATT_ENT_ACT_MODE, >> + AXP22X_IRQ_BATT_EXIT_ACT_MODE, >> + AXP22X_IRQ_CHARG, >> + AXP22X_IRQ_CHARG_DONE, >> + AXP22X_IRQ_BATT_TEMP_HIGH, >> + AXP22X_IRQ_BATT_TEMP_LOW, >> + AXP22X_IRQ_DIE_TEMP_HIGH, >> + AXP22X_IRQ_PEK_SHORT, >> + AXP22X_IRQ_PEK_LONG, >> + AXP22X_IRQ_LOW_PWR_LVL1, >> + AXP22X_IRQ_LOW_PWR_LVL2, >> + AXP22X_IRQ_TIMER, >> + AXP22X_IRQ_PEK_RIS_EDGE, >> + AXP22X_IRQ_PEK_FAL_EDGE, >> + AXP22X_IRQ_GPIO1_INPUT, >> + AXP22X_IRQ_GPIO0_INPUT, >> +}; >> + >> enum axp288_irqs { >> AXP288_IRQ_VBUS_FALL = 2, >> AXP288_IRQ_VBUS_RISE, > > -- > Lee Jones > Linaro STMicroelectronics Landing Team Lead > Linaro.org ? Open source software for ARM SoCs > Follow Linaro: Facebook | Twitter | Blog
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index 1386826f713d..58573a5f73de 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -32,6 +32,7 @@ static const char * const axp20x_model_names[] = { "AXP202", "AXP209", + "AXP221", "AXP288", }; @@ -54,6 +55,25 @@ static const struct regmap_access_table axp20x_volatile_table = { .n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges), }; +static const struct regmap_range axp22x_writeable_ranges[] = { + regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), + regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1), +}; + +static const struct regmap_range axp22x_volatile_ranges[] = { + regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE), +}; + +static const struct regmap_access_table axp22x_writeable_table = { + .yes_ranges = axp22x_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(axp22x_writeable_ranges), +}; + +static const struct regmap_access_table axp22x_volatile_table = { + .yes_ranges = axp22x_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(axp22x_volatile_ranges), +}; + static const struct regmap_range axp288_writeable_ranges[] = { regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE), regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5), @@ -87,6 +107,20 @@ static struct resource axp20x_pek_resources[] = { }, }; +static struct resource axp22x_pek_resources[] = { + { + .name = "PEK_DBR", + .start = AXP22X_IRQ_PEK_RIS_EDGE, + .end = AXP22X_IRQ_PEK_RIS_EDGE, + .flags = IORESOURCE_IRQ, + }, { + .name = "PEK_DBF", + .start = AXP22X_IRQ_PEK_FAL_EDGE, + .end = AXP22X_IRQ_PEK_FAL_EDGE, + .flags = IORESOURCE_IRQ, + }, +}; + static struct resource axp288_fuel_gauge_resources[] = { { .start = AXP288_IRQ_QWBTU, @@ -129,6 +163,15 @@ static const struct regmap_config axp20x_regmap_config = { .cache_type = REGCACHE_RBTREE, }; +static const struct regmap_config axp22x_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .wr_table = &axp22x_writeable_table, + .volatile_table = &axp22x_volatile_table, + .max_register = AXP22X_BATLOW_THRES1, + .cache_type = REGCACHE_RBTREE, +}; + static const struct regmap_config axp288_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -181,6 +224,34 @@ static const struct regmap_irq axp20x_regmap_irqs[] = { INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0), }; +static const struct regmap_irq axp22x_regmap_irqs[] = { + INIT_REGMAP_IRQ(AXP22X, ACIN_OVER_V, 0, 7), + INIT_REGMAP_IRQ(AXP22X, ACIN_PLUGIN, 0, 6), + INIT_REGMAP_IRQ(AXP22X, ACIN_REMOVAL, 0, 5), + INIT_REGMAP_IRQ(AXP22X, VBUS_OVER_V, 0, 4), + INIT_REGMAP_IRQ(AXP22X, VBUS_PLUGIN, 0, 3), + INIT_REGMAP_IRQ(AXP22X, VBUS_REMOVAL, 0, 2), + INIT_REGMAP_IRQ(AXP22X, VBUS_V_LOW, 0, 1), + INIT_REGMAP_IRQ(AXP22X, BATT_PLUGIN, 1, 7), + INIT_REGMAP_IRQ(AXP22X, BATT_REMOVAL, 1, 6), + INIT_REGMAP_IRQ(AXP22X, BATT_ENT_ACT_MODE, 1, 5), + INIT_REGMAP_IRQ(AXP22X, BATT_EXIT_ACT_MODE, 1, 4), + INIT_REGMAP_IRQ(AXP22X, CHARG, 1, 3), + INIT_REGMAP_IRQ(AXP22X, CHARG_DONE, 1, 2), + INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_HIGH, 1, 1), + INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_LOW, 1, 0), + INIT_REGMAP_IRQ(AXP22X, DIE_TEMP_HIGH, 2, 7), + INIT_REGMAP_IRQ(AXP22X, PEK_SHORT, 2, 1), + INIT_REGMAP_IRQ(AXP22X, PEK_LONG, 2, 0), + INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL1, 3, 1), + INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL2, 3, 0), + INIT_REGMAP_IRQ(AXP22X, TIMER, 4, 7), + INIT_REGMAP_IRQ(AXP22X, PEK_RIS_EDGE, 4, 6), + INIT_REGMAP_IRQ(AXP22X, PEK_FAL_EDGE, 4, 5), + INIT_REGMAP_IRQ(AXP22X, GPIO1_INPUT, 4, 1), + INIT_REGMAP_IRQ(AXP22X, GPIO0_INPUT, 4, 0), +}; + /* some IRQs are compatible with axp20x models */ static const struct regmap_irq axp288_regmap_irqs[] = { INIT_REGMAP_IRQ(AXP288, VBUS_FALL, 0, 2), @@ -224,6 +295,7 @@ static const struct regmap_irq axp288_regmap_irqs[] = { static const struct of_device_id axp20x_of_match[] = { { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID }, { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID }, + { .compatible = "x-powers,axp221", .data = (void *) AXP221_ID }, { }, }; MODULE_DEVICE_TABLE(of, axp20x_of_match); @@ -258,6 +330,18 @@ static const struct regmap_irq_chip axp20x_regmap_irq_chip = { }; +static const struct regmap_irq_chip axp22x_regmap_irq_chip = { + .name = "axp22x_irq_chip", + .status_base = AXP20X_IRQ1_STATE, + .ack_base = AXP20X_IRQ1_STATE, + .mask_base = AXP20X_IRQ1_EN, + .mask_invert = true, + .init_ack_masked = true, + .irqs = axp22x_regmap_irqs, + .num_irqs = ARRAY_SIZE(axp22x_regmap_irqs), + .num_regs = 5, +}; + static const struct regmap_irq_chip axp288_regmap_irq_chip = { .name = "axp288_irq_chip", .status_base = AXP20X_IRQ1_STATE, @@ -281,6 +365,14 @@ static struct mfd_cell axp20x_cells[] = { }, }; +static struct mfd_cell axp22x_cells[] = { + { + .name = "axp20x-pek", + .num_resources = ARRAY_SIZE(axp22x_pek_resources), + .resources = axp22x_pek_resources, + }, +}; + static struct resource axp288_adc_resources[] = { { .name = "GPADC", @@ -398,6 +490,12 @@ static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev) axp20x->regmap_cfg = &axp20x_regmap_config; axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip; break; + case AXP221_ID: + axp20x->nr_cells = ARRAY_SIZE(axp22x_cells); + axp20x->cells = axp22x_cells; + axp20x->regmap_cfg = &axp22x_regmap_config; + axp20x->regmap_irq_chip = &axp22x_regmap_irq_chip; + break; case AXP288_ID: axp20x->cells = axp288_cells; axp20x->nr_cells = ARRAY_SIZE(axp288_cells); diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index dfabd6db7ddf..95568eb798c3 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -14,6 +14,7 @@ enum { AXP202_ID = 0, AXP209_ID, + AXP221_ID, AXP288_ID, NR_AXP20X_VARIANTS, }; @@ -45,6 +46,28 @@ enum { #define AXP20X_V_LTF_DISCHRG 0x3c #define AXP20X_V_HTF_DISCHRG 0x3d +#define AXP22X_PWR_OUT_CTRL1 0x10 +#define AXP22X_PWR_OUT_CTRL2 0x12 +#define AXP22X_PWR_OUT_CTRL3 0x13 +#define AXP22X_DLDO1_V_OUT 0x15 +#define AXP22X_DLDO2_V_OUT 0x16 +#define AXP22X_DLDO3_V_OUT 0x17 +#define AXP22X_DLDO4_V_OUT 0x18 +#define AXP22X_ELDO1_V_OUT 0x19 +#define AXP22X_ELDO2_V_OUT 0x1a +#define AXP22X_ELDO3_V_OUT 0x1b +#define AXP22X_DC5LDO_V_OUT 0x1c +#define AXP22X_DCDC1_V_OUT 0x21 +#define AXP22X_DCDC2_V_OUT 0x22 +#define AXP22X_DCDC3_V_OUT 0x23 +#define AXP22X_DCDC4_V_OUT 0x24 +#define AXP22X_DCDC5_V_OUT 0x25 +#define AXP22X_DCDC23_V_RAMP_CTRL 0x27 +#define AXP22X_ALDO1_V_OUT 0x28 +#define AXP22X_ALDO2_V_OUT 0x29 +#define AXP22X_ALDO3_V_OUT 0x2a +#define AXP22X_CHRG_CTRL3 0x35 + /* Interrupt */ #define AXP20X_IRQ1_EN 0x40 #define AXP20X_IRQ2_EN 0x41 @@ -100,6 +123,9 @@ enum { #define AXP20X_VBUS_MON 0x8b #define AXP20X_OVER_TMP 0x8f +#define AXP22X_PWREN_CTRL1 0x8c +#define AXP22X_PWREN_CTRL2 0x8d + /* GPIO */ #define AXP20X_GPIO0_CTRL 0x90 #define AXP20X_LDO5_V_OUT 0x91 @@ -108,6 +134,11 @@ enum { #define AXP20X_GPIO20_SS 0x94 #define AXP20X_GPIO3_CTRL 0x95 +#define AXP22X_LDO_IO0_V_OUT 0x91 +#define AXP22X_LDO_IO1_V_OUT 0x93 +#define AXP22X_GPIO_STATE 0x94 +#define AXP22X_GPIO_PULL_DOWN 0x95 + /* Battery */ #define AXP20X_CHRG_CC_31_24 0xb0 #define AXP20X_CHRG_CC_23_16 0xb1 @@ -120,6 +151,9 @@ enum { #define AXP20X_CC_CTRL 0xb8 #define AXP20X_FG_RES 0xb9 +/* AXP22X specific registers */ +#define AXP22X_BATLOW_THRES1 0xe6 + /* AXP288 specific registers */ #define AXP288_PMIC_ADC_H 0x56 #define AXP288_PMIC_ADC_L 0x57 @@ -158,6 +192,30 @@ enum { AXP20X_REG_ID_MAX, }; +enum { + AXP22X_DCDC1 = 0, + AXP22X_DCDC2, + AXP22X_DCDC3, + AXP22X_DCDC4, + AXP22X_DCDC5, + AXP22X_DC1SW, + AXP22X_DC5LDO, + AXP22X_ALDO1, + AXP22X_ALDO2, + AXP22X_ALDO3, + AXP22X_ELDO1, + AXP22X_ELDO2, + AXP22X_ELDO3, + AXP22X_DLDO1, + AXP22X_DLDO2, + AXP22X_DLDO3, + AXP22X_DLDO4, + AXP22X_RTC_LDO, + AXP22X_LDO_IO0, + AXP22X_LDO_IO1, + AXP22X_REG_ID_MAX, +}; + /* IRQs */ enum { AXP20X_IRQ_ACIN_OVER_V = 1, @@ -199,6 +257,34 @@ enum { AXP20X_IRQ_GPIO0_INPUT, }; +enum axp22x_irqs { + AXP22X_IRQ_ACIN_OVER_V = 1, + AXP22X_IRQ_ACIN_PLUGIN, + AXP22X_IRQ_ACIN_REMOVAL, + AXP22X_IRQ_VBUS_OVER_V, + AXP22X_IRQ_VBUS_PLUGIN, + AXP22X_IRQ_VBUS_REMOVAL, + AXP22X_IRQ_VBUS_V_LOW, + AXP22X_IRQ_BATT_PLUGIN, + AXP22X_IRQ_BATT_REMOVAL, + AXP22X_IRQ_BATT_ENT_ACT_MODE, + AXP22X_IRQ_BATT_EXIT_ACT_MODE, + AXP22X_IRQ_CHARG, + AXP22X_IRQ_CHARG_DONE, + AXP22X_IRQ_BATT_TEMP_HIGH, + AXP22X_IRQ_BATT_TEMP_LOW, + AXP22X_IRQ_DIE_TEMP_HIGH, + AXP22X_IRQ_PEK_SHORT, + AXP22X_IRQ_PEK_LONG, + AXP22X_IRQ_LOW_PWR_LVL1, + AXP22X_IRQ_LOW_PWR_LVL2, + AXP22X_IRQ_TIMER, + AXP22X_IRQ_PEK_RIS_EDGE, + AXP22X_IRQ_PEK_FAL_EDGE, + AXP22X_IRQ_GPIO1_INPUT, + AXP22X_IRQ_GPIO0_INPUT, +}; + enum axp288_irqs { AXP288_IRQ_VBUS_FALL = 2, AXP288_IRQ_VBUS_RISE,