@@ -1,4 +1,5 @@
dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
+dtb-$(CONFIG_ARCH_XGENE) += apm-merlin.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
new file mode 100644
@@ -0,0 +1,42 @@
+/*
+ * dts file for AppliedMicro (APM) Merlin Board
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/include/ "apm-shadowcat.dtsi"
+
+/ {
+ model = "APM X-Gene Merlin board";
+ compatible = "apm,merlin", "apm,xgene-shadowcat";
+
+ chosen { };
+
+ memory {
+ device_type = "memory";
+ reg = < 0x1 0x00000000 0x0 0x80000000 >;
+ };
+};
+
+&serial0 {
+ status = "ok";
+};
+&pcie0 {
+ status = "ok";
+};
+&sata1 {
+ status = "ok";
+};
+&sata2 {
+ status = "ok";
+};
+&sata3 {
+ status = "ok";
+};
new file mode 100644
@@ -0,0 +1,216 @@
+/*
+ * dts file for AppliedMicro (APM) X-Gene Shadowcat SOC
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/ {
+ compatible = "apm,xgene-shadowcat";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@000 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x000>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@001 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x001>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@100 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@101 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@200 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x200>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@201 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x201>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@300 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x300>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@301 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x301>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ };
+
+ gic: interrupt-controller@78090000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-controller;
+ interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */
+ ranges = <0 0 0 0x79000000 0x0 0x800000>; /* MSI Range */
+ reg = <0x0 0x78090000 0x0 0x10000>, /* GIC Dist */
+ <0x0 0x780A0000 0x0 0x20000>, /* GIC CPU */
+ <0x0 0x780C0000 0x0 0x10000>, /* GIC VCPU Control */
+ <0x0 0x780E0000 0x0 0x20000>; /* GIC VCPU */
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <1 12 0xff04>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 0 0xff04>, /* Secure Phys IRQ */
+ <1 13 0xff04>, /* Non-secure Phys IRQ */
+ <1 14 0xff04>, /* Virt IRQ */
+ <1 15 0xff04>; /* Hyp IRQ */
+ clock-frequency = <50000000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ refclk: refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk";
+ };
+
+ socpll: socpll@17000120 {
+ compatible = "apm,xgene-socpll-clock";
+ #clock-cells = <1>;
+ clocks = <&refclk 0>;
+ reg = <0x0 0x17000120 0x0 0x1000>;
+ clock-output-names = "socpll";
+ };
+
+ socplldiv2: socplldiv2 {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <1>;
+ clocks = <&socpll 0>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ clock-output-names = "socplldiv2";
+ };
+
+ pcie0clk: pcie0clk@1f2bc000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f2bc000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie0clk";
+ };
+ };
+
+ serial0: serial@10600000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x10600000 0x0 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <10000000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x4c 0x4>;
+ };
+
+ pcie0: pcie@1f2b0000 {
+ device_type = "pci";
+ compatible = "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
+ 0xc0 0x10000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x00 0x00000000 0xC0 0x00000000 0x00 0x00010000 /* io */
+ 0x02000000 0x00 0x80000000 0xC0 0x80000000 0x00 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x12 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x13 0x1>;
+ clocks = <&pcie0clk 0>;
+ dma-coherent;
+ };
+
+ sata1: sata@1a000000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a000000 0x0 0x1000>,
+ <0x0 0x1f200000 0x0 0x1000>,
+ <0x0 0x1f20d000 0x0 0x1000>,
+ <0x0 0x1f20e000 0x0 0x1000>;
+ interrupts = <0x0 0x5a 0x4>;
+ dma-coherent;
+ };
+
+ sata2: sata@1a200000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a200000 0x0 0x1000>,
+ <0x0 0x1f210000 0x0 0x1000>,
+ <0x0 0x1f21d000 0x0 0x1000>,
+ <0x0 0x1f21e000 0x0 0x1000>;
+ interrupts = <0x0 0x5b 0x4>;
+ dma-coherent;
+ };
+
+ sata3: sata@1a400000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a400000 0x0 0x1000>,
+ <0x0 0x1f220000 0x0 0x1000>,
+ <0x0 0x1f22d000 0x0 0x1000>,
+ <0x0 0x1f22e000 0x0 0x1000>;
+ interrupts = <0x0 0x5c 0x4>;
+ dma-coherent;
+ };
+ };
+};
This patch adds the support for APM Merlin board. The Merlin board is based on the APM X-Gene Shadowcat SoC. This DTS enables PMU, SATA and Serial. Signed-off-by: Feng Kan <fkan@apm.com> --- V3 Change: - Add PCIe - Add merline to makefile in dts/apm directory V2 Change: - Add dma-range definition V1 Change: - add memreserve for spintable. - remove clkfreq attribute - update spin location, although it is done by bootloader. - remove msi reg entry - add chosen for stdout path arch/arm64/boot/dts/apm/Makefile | 1 + arch/arm64/boot/dts/apm/apm-merlin.dts | 42 ++++++ arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 216 +++++++++++++++++++++++++++++ 3 files changed, 259 insertions(+) create mode 100644 arch/arm64/boot/dts/apm/apm-merlin.dts create mode 100644 arch/arm64/boot/dts/apm/apm-shadowcat.dtsi