@@ -211,6 +211,14 @@ config GPIO_MOXART
Select this option to enable GPIO driver for
MOXA ART SoC devices.
+config GPIO_LPC18XX
+ bool "NXP LPC18XX/43XX GPIO support"
+ default y if ARCH_LPC18XX
+ depends on OF_GPIO && (ARCH_LPC18XX || COMPILE_TEST)
+ help
+ Select this option to enable GPIO driver for
+ NXP LPC18XX/43XX devices.
+
config GPIO_MPC5200
def_bool y
depends on PPC_MPC52xx
@@ -42,6 +42,7 @@ obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o
obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
+obj-$(CONFIG_GPIO_LPC18XX) += gpio-lpc18xx.o
obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
new file mode 100644
@@ -0,0 +1,191 @@
+/*
+ * GPIO driver for NXP LPC18xx/43xx.
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+
+/* LPC18xx GPIO register offsets */
+#define LPC18XX_REG_PWORD(n) (0x1000 + n * sizeof(u32))
+#define LPC18XX_REG_DIR(n) (0x2000 + n * sizeof(u32))
+#define LPC18XX_REG_SET(n) (0x2200 + n * sizeof(u32))
+#define LPC18XX_REG_CLR(n) (0x2280 + n * sizeof(u32))
+
+#define LPC18XX_MAX_PORTS 8
+#define LPC18XX_PINS_PER_PORT 32
+
+struct lpc18xx_gpio_chip {
+ struct gpio_chip gpio;
+ void __iomem *base;
+ struct clk *clk;
+};
+
+static inline struct lpc18xx_gpio_chip *to_lpc18xx_gpio(struct gpio_chip *chip)
+{
+ return container_of(chip, struct lpc18xx_gpio_chip, gpio);
+}
+
+static int lpc18xx_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ return pinctrl_request_gpio(offset);
+}
+
+static void lpc18xx_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ pinctrl_free_gpio(offset);
+}
+
+static void lpc18xx_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct lpc18xx_gpio_chip *gc = to_lpc18xx_gpio(chip);
+ u32 port, pin, reg_offset;
+
+ port = offset / LPC18XX_PINS_PER_PORT;
+ pin = offset % LPC18XX_PINS_PER_PORT;
+
+ if (value)
+ reg_offset = LPC18XX_REG_SET(port);
+ else
+ reg_offset = LPC18XX_REG_CLR(port);
+
+ writel(1 << pin, gc->base + reg_offset);
+}
+
+static int lpc18xx_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct lpc18xx_gpio_chip *gc = to_lpc18xx_gpio(chip);
+ u32 reg_offset = LPC18XX_REG_PWORD(offset);
+
+ return !!readl(gc->base + reg_offset);
+}
+
+static int lpc18xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct lpc18xx_gpio_chip *gc = to_lpc18xx_gpio(chip);
+ u32 port, pin, dir, reg_offset;
+
+ port = offset / LPC18XX_PINS_PER_PORT;
+ pin = offset % LPC18XX_PINS_PER_PORT;
+ reg_offset = LPC18XX_REG_DIR(port);
+
+ dir = readl(gc->base + reg_offset) & ~BIT(pin);
+ writel(dir, gc->base + reg_offset);
+
+ return 0;
+}
+
+static int lpc18xx_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct lpc18xx_gpio_chip *gc = to_lpc18xx_gpio(chip);
+ u32 port, pin, dir, reg_offset;
+
+ lpc18xx_gpio_set(chip, offset, value);
+
+ port = offset / LPC18XX_PINS_PER_PORT;
+ pin = offset % LPC18XX_PINS_PER_PORT;
+ reg_offset = LPC18XX_REG_DIR(port);
+
+ dir = readl(gc->base + reg_offset) | BIT(pin);
+ writel(dir, gc->base + reg_offset);
+
+ return 0;
+}
+
+static struct gpio_chip lpc18xx_chip = {
+ .label = "lpc18xx/43xx-gpio",
+ .request = lpc18xx_gpio_request,
+ .free = lpc18xx_gpio_free,
+ .direction_input = lpc18xx_gpio_direction_input,
+ .direction_output = lpc18xx_gpio_direction_output,
+ .set = lpc18xx_gpio_set,
+ .get = lpc18xx_gpio_get,
+ .ngpio = LPC18XX_MAX_PORTS * LPC18XX_PINS_PER_PORT,
+ .owner = THIS_MODULE,
+};
+
+static int lpc18xx_gpio_probe(struct platform_device *pdev)
+{
+ struct lpc18xx_gpio_chip *gc;
+ struct resource *res;
+ int ret;
+
+ gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
+ if (!gc)
+ return -ENOMEM;
+
+ gc->gpio = lpc18xx_chip;
+ platform_set_drvdata(pdev, gc);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ gc->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(gc->base))
+ return PTR_ERR(gc->base);
+
+ gc->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(gc->clk)) {
+ dev_err(&pdev->dev, "Input clock not found.\n");
+ return PTR_ERR(gc->clk);
+ }
+
+ ret = clk_prepare_enable(gc->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to enable clock.\n");
+ return ret;
+ }
+
+ gc->gpio.dev = &pdev->dev;
+ gc->gpio.of_node = pdev->dev.of_node;
+
+ ret = gpiochip_add(&gc->gpio);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to add gpio chip\n");
+ clk_disable_unprepare(gc->clk);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int lpc18xx_gpio_remove(struct platform_device *pdev)
+{
+ struct lpc18xx_gpio_chip *gc = platform_get_drvdata(pdev);
+
+ gpiochip_remove(&gc->gpio);
+ clk_disable_unprepare(gc->clk);
+
+ return 0;
+}
+
+static const struct of_device_id lpc18xx_gpio_match[] = {
+ { .compatible = "nxp,lpc1850-gpio" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_gpio_match);
+
+static struct platform_driver lpc18xx_gpio_driver = {
+ .probe = lpc18xx_gpio_probe,
+ .remove = lpc18xx_gpio_remove,
+ .driver = {
+ .name = "lpc18xx-gpio",
+ .of_match_table = lpc18xx_gpio_match,
+ },
+};
+module_platform_driver(lpc18xx_gpio_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_DESCRIPTION("GPIO driver for LPC18xx/43xx");
+MODULE_LICENSE("GPL v2");
Driver for the GPIO block found on NXP LPC18xx/43xx devices. The GPIO block is divided into 8 ports which each support up to 32 gpios. The which gpios that are available depends on the specific device and it's package. Signed-off-by: Joachim Eastwood <manabian@gmail.com> --- drivers/gpio/Kconfig | 8 ++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-lpc18xx.c | 191 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 200 insertions(+) create mode 100644 drivers/gpio/gpio-lpc18xx.c