@@ -553,6 +553,15 @@ config SECCOMP
and the task is only allowed to execute a few safe syscalls
defined by each seccomp mode.
+config KEXEC
+ depends on (!SMP || PM_SLEEP_SMP)
+ bool "kexec system call"
+ ---help---
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is independent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
config XEN_DOM0
def_bool y
depends on XEN
new file mode 100644
@@ -0,0 +1,48 @@
+/*
+ * kexec for arm64
+ *
+ * Copyright (C) Linaro.
+ * Copyright (C) Futurewei Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#if !defined(_ARM64_KEXEC_H)
+#define _ARM64_KEXEC_H
+
+/* Maximum physical address we can use pages from */
+
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+
+/* Maximum address we can reach in physical address mode */
+
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+
+/* Maximum address we can use for the control code buffer */
+
+#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
+
+#define KEXEC_CONTROL_PAGE_SIZE 4096
+
+#define KEXEC_ARCH KEXEC_ARCH_ARM64
+
+#if !defined(__ASSEMBLY__)
+
+/**
+ * crash_setup_regs() - save registers for the panic kernel
+ *
+ * @newregs: registers are saved here
+ * @oldregs: registers to be saved (may be %NULL)
+ */
+
+static inline void crash_setup_regs(struct pt_regs *newregs,
+ struct pt_regs *oldregs)
+{
+ /* Empty routine needed to avoid build errors. */
+}
+
+#endif /* !defined(__ASSEMBLY__) */
+
+#endif
@@ -35,6 +35,7 @@ arm64-obj-$(CONFIG_KGDB) += kgdb.o
arm64-obj-$(CONFIG_EFI) += efi.o efi-stub.o efi-entry.o
arm64-obj-$(CONFIG_PCI) += pci.o
arm64-obj-$(CONFIG_ARMV8_DEPRECATED) += armv8_deprecated.o
+arm64-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-y += $(arm64-obj-y) vdso/
obj-m += $(arm64-obj-m)
new file mode 100644
@@ -0,0 +1,120 @@
+/*
+ * kexec for arm64
+ *
+ * Copyright (C) Linaro.
+ * Copyright (C) Futurewei Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kexec.h>
+#include <linux/of_fdt.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include <asm/cacheflush.h>
+#include <asm/system_misc.h>
+
+/* Global variables for the relocate_kernel routine. */
+extern const unsigned char relocate_new_kernel[];
+extern const unsigned long relocate_new_kernel_size;
+extern unsigned long arm64_kexec_dtb_addr;
+extern unsigned long arm64_kexec_kimage_head;
+extern unsigned long arm64_kexec_kimage_start;
+
+void machine_kexec_cleanup(struct kimage *image)
+{
+ /* Empty routine needed to avoid build errors. */
+}
+
+/**
+ * machine_kexec_prepare - Prepare for a kexec reboot.
+ *
+ * Called from the core kexec code when a kernel image is loaded.
+ */
+int machine_kexec_prepare(struct kimage *image)
+{
+ arm64_kexec_kimage_start = image->start;
+ return 0;
+}
+
+/**
+ * kexec_list_flush - Helper to flush the kimage list to PoC.
+ */
+static void kexec_list_flush(unsigned long kimage_head)
+{
+ unsigned long *entry;
+
+ for (entry = &kimage_head; ; entry++) {
+ unsigned int flag = *entry & IND_FLAGS;
+ void *addr = phys_to_virt(*entry & PAGE_MASK);
+
+ switch (flag) {
+ case IND_INDIRECTION:
+ entry = (unsigned long *)addr - 1;
+ __flush_dcache_area(addr, PAGE_SIZE);
+ break;
+ case IND_DESTINATION:
+ break;
+ case IND_SOURCE:
+ __flush_dcache_area(addr, PAGE_SIZE);
+ break;
+ case IND_DONE:
+ return;
+ default:
+ BUG();
+ }
+ }
+}
+
+/**
+ * machine_kexec - Do the kexec reboot.
+ *
+ * Called from the core kexec code for a sys_reboot with LINUX_REBOOT_CMD_KEXEC.
+ */
+void machine_kexec(struct kimage *image)
+{
+ phys_addr_t reboot_code_buffer_phys;
+ void *reboot_code_buffer;
+
+ BUG_ON(num_online_cpus() > 1);
+
+ arm64_kexec_kimage_head = image->head;
+
+ reboot_code_buffer_phys = page_to_phys(image->control_code_page);
+ reboot_code_buffer = phys_to_virt(reboot_code_buffer_phys);
+
+ /*
+ * Copy relocate_new_kernel to the reboot_code_buffer for use
+ * after the kernel is shut down.
+ */
+ memcpy(reboot_code_buffer, relocate_new_kernel,
+ relocate_new_kernel_size);
+
+ /* Flush the reboot_code_buffer in preparation for its execution. */
+ __flush_dcache_area(reboot_code_buffer, relocate_new_kernel_size);
+
+ /* Flush the kimage list. */
+ kexec_list_flush(image->head);
+
+ pr_info("Bye!\n");
+
+ /* Disable all DAIF exceptions. */
+ asm volatile ("msr daifset, #0xf" : : : "memory");
+
+ /*
+ * soft_restart() will shutdown the MMU, disable data caches, then
+ * transfer control to the reboot_code_buffer which contains a copy of
+ * the relocate_new_kernel routine. relocate_new_kernel will use
+ * physical addressing to relocate the new kernel to its final position
+ * and then will transfer control to the entry point of the new kernel.
+ */
+ soft_restart(reboot_code_buffer_phys);
+}
+
+void machine_crash_shutdown(struct pt_regs *regs)
+{
+ /* Empty routine needed to avoid build errors. */
+}
new file mode 100644
@@ -0,0 +1,149 @@
+/*
+ * kexec for arm64
+ *
+ * Copyright (C) Linaro.
+ * Copyright (C) Futurewei Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kexec.h>
+
+#include <asm/assembler.h>
+#include <asm/kexec.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+
+
+/*
+ * relocate_new_kernel - Put a 2nd stage kernel image in place and boot it.
+ *
+ * The memory that the old kernel occupies may be overwritten when coping the
+ * new image to its final location. To assure that the relocate_new_kernel
+ * routine which does that copy is not overwritten all code and data needed
+ * by relocate_new_kernel must be between the symbols relocate_new_kernel and
+ * relocate_new_kernel_end. The machine_kexec() routine will copy
+ * relocate_new_kernel to the kexec control_code_page, a special page which
+ * has been set up to be preserved during the copy operation.
+ */
+.globl relocate_new_kernel
+relocate_new_kernel:
+
+ /* Setup the list loop variables. */
+ ldr x18, arm64_kexec_kimage_head /* x18 = list entry */
+ dcache_line_size x17, x0 /* x17 = dcache line size */
+ mov x16, xzr /* x16 = segment start */
+ mov x15, xzr /* x15 = entry ptr */
+ mov x14, xzr /* x14 = copy dest */
+
+ /* Check if the new image needs relocation. */
+ cbz x18, .Ldone
+ tbnz x18, IND_DONE_BIT, .Ldone
+
+.Lloop:
+ and x13, x18, PAGE_MASK /* x13 = addr */
+
+ /* Test the entry flags. */
+.Ltest_source:
+ tbz x18, IND_SOURCE_BIT, .Ltest_indirection
+
+ mov x20, x14 /* x20 = copy dest */
+ mov x21, x13 /* x21 = copy src */
+
+ /* Invalidate dest page to PoC. */
+ mov x0, x20
+ add x19, x0, #PAGE_SIZE
+ sub x1, x17, #1
+ bic x0, x0, x1
+1: dc ivac, x0
+ add x0, x0, x17
+ cmp x0, x19
+ b.lo 1b
+ dsb sy
+
+ /* Copy page. */
+1: ldp x22, x23, [x21]
+ ldp x24, x25, [x21, #16]
+ ldp x26, x27, [x21, #32]
+ ldp x28, x29, [x21, #48]
+ add x21, x21, #64
+ stnp x22, x23, [x20]
+ stnp x24, x25, [x20, #16]
+ stnp x26, x27, [x20, #32]
+ stnp x28, x29, [x20, #48]
+ add x20, x20, #64
+ tst x21, #(PAGE_SIZE - 1)
+ b.ne 1b
+
+ /* dest += PAGE_SIZE */
+ add x14, x14, PAGE_SIZE
+ b .Lnext
+
+.Ltest_indirection:
+ tbz x18, IND_INDIRECTION_BIT, .Ltest_destination
+
+ /* ptr = addr */
+ mov x15, x13
+ b .Lnext
+
+.Ltest_destination:
+ tbz x18, IND_DESTINATION_BIT, .Lnext
+
+ mov x16, x13
+
+ /* dest = addr */
+ mov x14, x13
+
+.Lnext:
+ /* entry = *ptr++ */
+ ldr x18, [x15], #8
+
+ /* while (!(entry & DONE)) */
+ tbz x18, IND_DONE_BIT, .Lloop
+
+.Ldone:
+ dsb sy
+ isb
+ ic ialluis
+ dsb sy
+ isb
+
+ /* Start new image. */
+ ldr x4, arm64_kexec_kimage_start
+ mov x0, xzr
+ mov x1, xzr
+ mov x2, xzr
+ mov x3, xzr
+ br x4
+
+.align 3 /* To keep the 64-bit values below naturally aligned. */
+
+/* The machine_kexec routines set these variables. */
+
+/*
+ * arm64_kexec_kimage_start - Copy of image->start, the entry point of the new
+ * image.
+ */
+.globl arm64_kexec_kimage_start
+arm64_kexec_kimage_start:
+ .quad 0x0
+
+/*
+ * arm64_kexec_kimage_head - Copy of image->head, the list of kimage entries.
+ */
+.globl arm64_kexec_kimage_head
+arm64_kexec_kimage_head:
+ .quad 0x0
+
+.Lrelocate_new_kernel_end:
+
+/*
+ * relocate_new_kernel_size - Number of bytes to copy to the control_code_page.
+ */
+.globl relocate_new_kernel_size
+relocate_new_kernel_size:
+ .quad .Lrelocate_new_kernel_end - relocate_new_kernel
+
+.org KEXEC_CONTROL_PAGE_SIZE
@@ -18,6 +18,7 @@ if VIRTUALIZATION
config KVM
bool "Kernel-based Virtual Machine (KVM) support"
+ depends on !KEXEC
select MMU_NOTIFIER
select PREEMPT_NOTIFIERS
select ANON_INODES
@@ -39,6 +39,7 @@
#define KEXEC_ARCH_SH (42 << 16)
#define KEXEC_ARCH_MIPS_LE (10 << 16)
#define KEXEC_ARCH_MIPS ( 8 << 16)
+#define KEXEC_ARCH_ARM64 (183 << 16)
/* The artificial cap on the number of segments passed to kexec_load. */
#define KEXEC_SEGMENT_MAX 16
Add three new files, kexec.h, machine_kexec.c and relocate_kernel.S to the arm64 architecture that add support for the kexec re-boot mechanism (CONFIG_KEXEC) on arm64 platforms. With the addition of arm64 kexec support shutdown code paths through the kernel are executed that previously were not. To avoid system instability do to problems in the current arm64 KVM kernel implementation add a Kconfig dependency on !KEXEC to the arm64 KVM menu item. Signed-off-by: Geoff Levand <geoff@infradead.org> --- I pushed this V2 out to my kexec-v9 branch: git://git.kernel.org/pub/scm/linux/kernel/git/geoff/linux-kexec.git kexec-v9 -Geoff arch/arm64/Kconfig | 9 +++ arch/arm64/include/asm/kexec.h | 48 ++++++++++++ arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/machine_kexec.c | 120 +++++++++++++++++++++++++++++ arch/arm64/kernel/relocate_kernel.S | 149 ++++++++++++++++++++++++++++++++++++ arch/arm64/kvm/Kconfig | 1 + include/uapi/linux/kexec.h | 1 + 7 files changed, 329 insertions(+) create mode 100644 arch/arm64/include/asm/kexec.h create mode 100644 arch/arm64/kernel/machine_kexec.c create mode 100644 arch/arm64/kernel/relocate_kernel.S