@@ -185,6 +185,8 @@ nodes to be present and contain the properties described below.
be one of:
"psci"
"spin-table"
+ "qcom,arm-cortex-acc"
+
# On ARM 32-bit systems this property is optional and
can be one of:
"allwinner,sun6i-a31"
new file mode 100644
@@ -0,0 +1,19 @@
+Application Processor Sub-system (APSS) Application Clock Controller (ACC)
+
+The ACC provides clock, power domain, and reset control to a CPU. There is one ACC
+register region per CPU within the APSS remapped region as well as an alias register
+region that remaps accesses to the ACC associated with the CPU accessing the region.
+
+Required properties:
+- compatible: Must be "qcom,arm-cortex-acc"
+- reg: The first element specifies the base address and size of
+ the register region. An optional second element specifies
+ the base address and size of the alias register region.
+
+Example:
+
+ clock-controller@b088000 {
+ compatible = "qcom,arm-cortex-acc";
+ reg = <0x0b088000 0x1000>,
+ <0x0b008000 0x1000>;
+ }
@@ -25,6 +25,9 @@ arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \
arm64-obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o entry-ftrace.o
arm64-obj-$(CONFIG_MODULES) += arm64ksyms.o module.o
arm64-obj-$(CONFIG_SMP) += smp.o smp_spin_table.o topology.o
+ifdef CONFIG_SMP
+arm64-obj-$(CONFIG_ARCH_QCOM) += qcom-special-cpu-ops-dont-copy-this.o
+endif
arm64-obj-$(CONFIG_PERF_EVENTS) += perf_regs.o
arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
@@ -24,6 +24,7 @@
extern const struct cpu_operations smp_spin_table_ops;
extern const struct cpu_operations cpu_psci_ops;
+extern const struct cpu_operations qcom_cortex_a_ops;
const struct cpu_operations *cpu_ops[NR_CPUS];
@@ -32,6 +33,9 @@ static const struct cpu_operations *supported_cpu_ops[] __initconst = {
&smp_spin_table_ops,
#endif
&cpu_psci_ops,
+#ifdef CONFIG_ARCH_QCOM
+ &qcom_cortex_a_ops,
+#endif
NULL,
};
new file mode 100644
@@ -0,0 +1,281 @@
+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2013 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* MSM ARMv8 CPU Operations
+ * Based on arch/arm64/kernel/smp_spin_table.c
+ */
+
+#include <linux/bitops.h>
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/smp.h>
+#include <linux/qcom_scm.h>
+
+#include <asm/barrier.h>
+#include <asm/cacheflush.h>
+#include <asm/cpu_ops.h>
+#include <asm/cputype.h>
+#include <asm/smp_plat.h>
+
+DEFINE_PER_CPU(int, cold_boot_done);
+
+/* CPU power domain register offsets */
+#define CPU_PWR_CTL 0x4
+#define CPU_PWR_GATE_CTL 0x14
+#define LDO_BHS_PWR_CTL 0x28
+
+/* L2 power domain register offsets */
+#define L2_PWR_CTL_OVERRIDE 0xc
+#define L2_PWR_CTL 0x14
+#define L2_PWR_STATUS 0x18
+#define L2_CORE_CBCR 0x58
+#define L1_RST_DIS 0x284
+
+#define L2_SPM_STS 0xc
+#define L2_VREG_CTL 0x1c
+
+/*
+ * struct qcom_l2ccc_of_info: represents of data for l2 cache clock controller.
+ * @compat: compat string for l2 cache clock controller
+ * @l2_pon: l2 cache power on routine
+ */
+struct qcom_l2ccc_of_info {
+ const char *compat;
+ int (*l2_power_on) (struct device_node *dn, u32 l2_mask, int cpu);
+ u32 l2_power_on_mask;
+};
+
+static int power_on_l2_msm8916(struct device_node *l2ccc_node, u32 pon_mask,
+ int cpu)
+{
+ u32 pon_status;
+ void __iomem *l2_base;
+
+ l2_base = of_iomap(l2ccc_node, 0);
+ if (!l2_base)
+ return -ENOMEM;
+
+ /* Skip power-on sequence if l2 cache is already powered up*/
+ pon_status = (__raw_readl(l2_base + L2_PWR_STATUS) & pon_mask)
+ == pon_mask;
+ if (pon_status) {
+ iounmap(l2_base);
+ return 0;
+ }
+
+ /* Close L2/SCU Logic GDHS and power up the cache */
+ writel_relaxed(0x10D700, l2_base + L2_PWR_CTL);
+
+ /* Assert PRESETDBGn */
+ writel_relaxed(0x400000, l2_base + L2_PWR_CTL_OVERRIDE);
+ mb();
+ udelay(2);
+
+ /* De-assert L2/SCU memory Clamp */
+ writel_relaxed(0x101700, l2_base + L2_PWR_CTL);
+
+ /* Wakeup L2/SCU RAMs by deasserting sleep signals */
+ writel_relaxed(0x101703, l2_base + L2_PWR_CTL);
+ mb();
+ udelay(2);
+
+ /* Enable clocks via SW_CLK_EN */
+ writel_relaxed(0x01, l2_base + L2_CORE_CBCR);
+
+ /* De-assert L2/SCU logic clamp */
+ writel_relaxed(0x101603, l2_base + L2_PWR_CTL);
+ mb();
+ udelay(2);
+
+ /* De-assert PRESSETDBg */
+ writel_relaxed(0x0, l2_base + L2_PWR_CTL_OVERRIDE);
+
+ /* De-assert L2/SCU Logic reset */
+ writel_relaxed(0x100203, l2_base + L2_PWR_CTL);
+ mb();
+ udelay(54);
+
+ /* Turn on the PMIC_APC */
+ writel_relaxed(0x10100203, l2_base + L2_PWR_CTL);
+
+ /* Set H/W clock control for the cpu CBC block */
+ writel_relaxed(0x03, l2_base + L2_CORE_CBCR);
+ mb();
+ iounmap(l2_base);
+
+ return 0;
+}
+
+static const struct qcom_l2ccc_of_info l2ccc_info[] = {
+ {
+ .compat = "qcom,8916-l2ccc",
+ .l2_power_on = power_on_l2_msm8916,
+ .l2_power_on_mask = BIT(9),
+ },
+};
+
+static int power_on_l2_cache(struct device_node *l2ccc_node, int cpu)
+{
+ int ret, i;
+ const char *compat;
+
+ ret = of_property_read_string(l2ccc_node, "compatible", &compat);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(l2ccc_info); i++) {
+ const struct qcom_l2ccc_of_info *ptr = &l2ccc_info[i];
+
+ if (!of_compat_cmp(ptr->compat, compat, strlen(compat)))
+ return ptr->l2_power_on(l2ccc_node,
+ ptr->l2_power_on_mask, cpu);
+ }
+ pr_err("Compat string not found for L2CCC node\n");
+ return -EIO;
+}
+
+static int qcom_unclamp_secondary_arm_cpu(unsigned int cpu)
+{
+
+ int ret = 0;
+ struct device_node *cpu_node, *acc_node, *l2_node, *l2ccc_node;
+ void __iomem *reg;
+
+ cpu_node = of_get_cpu_node(cpu, NULL);
+ if (!cpu_node)
+ return -ENODEV;
+
+ acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
+ if (!acc_node) {
+ ret = -ENODEV;
+ goto out_acc;
+ }
+
+ l2_node = of_parse_phandle(cpu_node, "next-level-cache", 0);
+ if (!l2_node) {
+ ret = -ENODEV;
+ goto out_l2;
+ }
+
+ l2ccc_node = of_parse_phandle(l2_node, "power-domain", 0);
+ if (!l2ccc_node) {
+ ret = -ENODEV;
+ goto out_l2;
+ }
+
+ /* Ensure L2-cache of the CPU is powered on before
+ * unclamping cpu power rails.
+ */
+ ret = power_on_l2_cache(l2ccc_node, cpu);
+ if (ret) {
+ pr_err("L2 cache power up failed for CPU%d\n", cpu);
+ goto out_l2ccc;
+ }
+
+ reg = of_iomap(acc_node, 0);
+ if (!reg) {
+ ret = -ENOMEM;
+ goto out_acc_reg;
+ }
+
+ /* Assert Reset on cpu-n */
+ writel_relaxed(0x00000033, reg + CPU_PWR_CTL);
+ mb();
+
+ /*Program skew to 16 X0 clock cycles*/
+ writel_relaxed(0x10000001, reg + CPU_PWR_GATE_CTL);
+ mb();
+ udelay(2);
+
+ /* De-assert coremem clamp */
+ writel_relaxed(0x00000031, reg + CPU_PWR_CTL);
+ mb();
+
+ /* Close coremem array gdhs */
+ writel_relaxed(0x00000039, reg + CPU_PWR_CTL);
+ mb();
+ udelay(2);
+
+ /* De-assert cpu-n clamp */
+ writel_relaxed(0x00020038, reg + CPU_PWR_CTL);
+ mb();
+ udelay(2);
+
+ /* De-assert cpu-n reset */
+ writel_relaxed(0x00020008, reg + CPU_PWR_CTL);
+ mb();
+
+ /* Assert PWRDUP signal on core-n */
+ writel_relaxed(0x00020088, reg + CPU_PWR_CTL);
+ mb();
+
+ /* Secondary CPU-N is now alive */
+ iounmap(reg);
+out_acc_reg:
+ of_node_put(l2ccc_node);
+out_l2ccc:
+ of_node_put(l2_node);
+out_l2:
+ of_node_put(acc_node);
+out_acc:
+ of_node_put(cpu_node);
+
+ return ret;
+}
+
+static int __init qcom_cpu_init(struct device_node *dn, unsigned int cpu)
+{
+ /* Mark CPU0 cold boot flag as done */
+ if (!cpu && !per_cpu(cold_boot_done, cpu))
+ per_cpu(cold_boot_done, cpu) = true;
+
+ return 0;
+}
+
+static int __init qcom_cpu_prepare(unsigned int cpu)
+{
+ const cpumask_t *mask = cpumask_of(cpu);
+
+ if (qcom_scm_set_cold_boot_addr(secondary_entry, mask)) {
+ pr_warn("CPU%d:Failed to set boot address\n", cpu);
+ return -ENOSYS;
+ }
+
+ return 0;
+}
+
+static int qcom_cpu_boot(unsigned int cpu)
+{
+ int ret = 0;
+
+ if (per_cpu(cold_boot_done, cpu) == false) {
+ ret = qcom_unclamp_secondary_arm_cpu(cpu);
+ if (ret)
+ return ret;
+ per_cpu(cold_boot_done, cpu) = true;
+ }
+
+ return ret;
+}
+
+const struct cpu_operations qcom_cortex_a_ops = {
+ .name = "qcom,arm-cortex-acc",
+ .cpu_init = qcom_cpu_init,
+ .cpu_prepare = qcom_cpu_prepare,
+ .cpu_boot = qcom_cpu_boot,
+};