@@ -3,7 +3,7 @@
#
# Common support
-obj-y := clock.o generic.o irq.o #nmi-oopser.o
+obj-y := clock.o generic.o #nmi-oopser.o
# Specific board support
obj-$(CONFIG_SA1100_ASSABET) += assabet.o
deleted file mode 100644
@@ -1,186 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/irq.c
- *
- * Copyright (C) 1999-2001 Nicolas Pitre
- *
- * Generic IRQ handling for the SA11x0, GPIO 11-27 IRQ demultiplexing.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/ioport.h>
-#include <linux/syscore_ops.h>
-
-#include <soc/sa1100/pwer.h>
-
-#include <mach/irqs.h>
-#include <asm/exception.h>
-
-#include "generic.h"
-
-#define ICIP 0x00 /* IC IRQ Pending reg. */
-#define ICMR 0x04 /* IC Mask Reg. */
-#define ICLR 0x08 /* IC Level Reg. */
-#define ICCR 0x0C /* IC Control Reg. */
-#define ICFP 0x10 /* IC FIQ Pending reg. */
-#define ICPR 0x20 /* IC Pending Reg. */
-
-static void __iomem *iobase;
-
-/*
- * We don't need to ACK IRQs on the SA1100 unless they're GPIOs
- * this is for internal IRQs i.e. from IRQ LCD to RTCAlrm.
- */
-static void sa1100_mask_irq(struct irq_data *d)
-{
- u32 reg;
-
- reg = readl_relaxed(iobase + ICMR);
- reg &= ~BIT(d->hwirq);
- writel_relaxed(reg, iobase + ICMR);
-}
-
-static void sa1100_unmask_irq(struct irq_data *d)
-{
- u32 reg;
-
- reg = readl_relaxed(iobase + ICMR);
- reg |= BIT(d->hwirq);
- writel_relaxed(reg, iobase + ICMR);
-}
-
-static int sa1100_set_wake(struct irq_data *d, unsigned int on)
-{
- return sa11x0_sc_set_wake(d->hwirq, on);
-}
-
-static struct irq_chip sa1100_normal_chip = {
- .name = "SC",
- .irq_ack = sa1100_mask_irq,
- .irq_mask = sa1100_mask_irq,
- .irq_unmask = sa1100_unmask_irq,
- .irq_set_wake = sa1100_set_wake,
-};
-
-static int sa1100_normal_irqdomain_map(struct irq_domain *d,
- unsigned int irq, irq_hw_number_t hwirq)
-{
- irq_set_chip_and_handler(irq, &sa1100_normal_chip,
- handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
-
- return 0;
-}
-
-static struct irq_domain_ops sa1100_normal_irqdomain_ops = {
- .map = sa1100_normal_irqdomain_map,
- .xlate = irq_domain_xlate_onetwocell,
-};
-
-static struct irq_domain *sa1100_normal_irqdomain;
-
-static struct resource irq_resource =
- DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
-
-static struct sa1100irq_state {
- unsigned int saved;
- unsigned int icmr;
- unsigned int iclr;
- unsigned int iccr;
-} sa1100irq_state;
-
-static int sa1100irq_suspend(void)
-{
- struct sa1100irq_state *st = &sa1100irq_state;
-
- st->saved = 1;
- st->icmr = readl_relaxed(iobase + ICMR);
- st->iclr = readl_relaxed(iobase + ICLR);
- st->iccr = readl_relaxed(iobase + ICCR);
-
- /*
- * Disable all GPIO-based interrupts.
- */
- writel_relaxed(st->icmr & 0xfffff000, iobase + ICMR);
-
- return 0;
-}
-
-static void sa1100irq_resume(void)
-{
- struct sa1100irq_state *st = &sa1100irq_state;
-
- if (st->saved) {
- writel_relaxed(st->iccr, iobase + ICCR);
- writel_relaxed(st->iclr, iobase + ICLR);
-
- writel_relaxed(st->icmr, iobase + ICMR);
- }
-}
-
-static struct syscore_ops sa1100irq_syscore_ops = {
- .suspend = sa1100irq_suspend,
- .resume = sa1100irq_resume,
-};
-
-static int __init sa1100irq_init_devicefs(void)
-{
- register_syscore_ops(&sa1100irq_syscore_ops);
- return 0;
-}
-
-device_initcall(sa1100irq_init_devicefs);
-
-static asmlinkage void __exception_irq_entry
-sa1100_handle_irq(struct pt_regs *regs)
-{
- uint32_t icip, icmr, mask;
-
- do {
- icip = readl_relaxed(iobase + ICIP);
- icmr = readl_relaxed(iobase + ICMR);
- mask = icip & icmr;
-
- if (mask == 0)
- break;
-
- handle_domain_irq(sa1100_normal_irqdomain,
- ffs(mask) - 1, regs);
- } while (1);
-}
-
-void __init sa1100_init_irq(void)
-{
- request_resource(&iomem_resource, &irq_resource);
-
- iobase = ioremap(irq_resource.start, SZ_64K);
- if (WARN_ON(!iobase))
- return;
-
- /* disable all IRQs */
- writel_relaxed(0, iobase + ICMR);
-
- /* all IRQs are IRQ, not FIQ */
- writel_relaxed(0, iobase + ICLR);
-
- /*
- * Whatever the doc says, this has to be set for the wait-on-irq
- * instruction to work... on a SA1100 rev 9 at least.
- */
- writel_relaxed(1, iobase + ICCR);
-
- sa1100_normal_irqdomain = irq_domain_add_simple(NULL,
- 32, IRQ_GPIO0_SC,
- &sa1100_normal_irqdomain_ops, NULL);
-
- set_handle_irq(sa1100_handle_irq);
-
- sa1100_init_gpio();
-}
@@ -47,3 +47,4 @@ obj-$(CONFIG_KEYSTONE_IRQ) += irq-keystone.o
obj-$(CONFIG_MIPS_GIC) += irq-mips-gic.o
obj-$(CONFIG_ARCH_MEDIATEK) += irq-mtk-sysirq.o
obj-$(CONFIG_ARCH_DIGICOLOR) += irq-digicolor.o
+obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
new file mode 100644
@@ -0,0 +1,186 @@
+/*
+ * drivers/irqchip/irq-sa11x0.c
+ *
+ * Copyright (C) 1999-2001 Nicolas Pitre
+ *
+ * Generic IRQ handling for the SA11x0.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/ioport.h>
+#include <linux/syscore_ops.h>
+
+#include <soc/sa1100/pwer.h>
+
+#include <mach/irqs.h>
+#include <asm/exception.h>
+
+#include "../../arch/arm/mach-sa1100/generic.h"
+
+#define ICIP 0x00 /* IC IRQ Pending reg. */
+#define ICMR 0x04 /* IC Mask Reg. */
+#define ICLR 0x08 /* IC Level Reg. */
+#define ICCR 0x0C /* IC Control Reg. */
+#define ICFP 0x10 /* IC FIQ Pending reg. */
+#define ICPR 0x20 /* IC Pending Reg. */
+
+static void __iomem *iobase;
+
+/*
+ * We don't need to ACK IRQs on the SA1100 unless they're GPIOs
+ * this is for internal IRQs i.e. from IRQ LCD to RTCAlrm.
+ */
+static void sa1100_mask_irq(struct irq_data *d)
+{
+ u32 reg;
+
+ reg = readl_relaxed(iobase + ICMR);
+ reg &= ~BIT(d->hwirq);
+ writel_relaxed(reg, iobase + ICMR);
+}
+
+static void sa1100_unmask_irq(struct irq_data *d)
+{
+ u32 reg;
+
+ reg = readl_relaxed(iobase + ICMR);
+ reg |= BIT(d->hwirq);
+ writel_relaxed(reg, iobase + ICMR);
+}
+
+static int sa1100_set_wake(struct irq_data *d, unsigned int on)
+{
+ return sa11x0_sc_set_wake(d->hwirq, on);
+}
+
+static struct irq_chip sa1100_normal_chip = {
+ .name = "SC",
+ .irq_ack = sa1100_mask_irq,
+ .irq_mask = sa1100_mask_irq,
+ .irq_unmask = sa1100_unmask_irq,
+ .irq_set_wake = sa1100_set_wake,
+};
+
+static int sa1100_normal_irqdomain_map(struct irq_domain *d,
+ unsigned int irq, irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &sa1100_normal_chip,
+ handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+
+ return 0;
+}
+
+static struct irq_domain_ops sa1100_normal_irqdomain_ops = {
+ .map = sa1100_normal_irqdomain_map,
+ .xlate = irq_domain_xlate_onetwocell,
+};
+
+static struct irq_domain *sa1100_normal_irqdomain;
+
+static struct resource irq_resource =
+ DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
+
+static struct sa1100irq_state {
+ unsigned int saved;
+ unsigned int icmr;
+ unsigned int iclr;
+ unsigned int iccr;
+} sa1100irq_state;
+
+static int sa1100irq_suspend(void)
+{
+ struct sa1100irq_state *st = &sa1100irq_state;
+
+ st->saved = 1;
+ st->icmr = readl_relaxed(iobase + ICMR);
+ st->iclr = readl_relaxed(iobase + ICLR);
+ st->iccr = readl_relaxed(iobase + ICCR);
+
+ /*
+ * Disable all GPIO-based interrupts.
+ */
+ writel_relaxed(st->icmr & 0xfffff000, iobase + ICMR);
+
+ return 0;
+}
+
+static void sa1100irq_resume(void)
+{
+ struct sa1100irq_state *st = &sa1100irq_state;
+
+ if (st->saved) {
+ writel_relaxed(st->iccr, iobase + ICCR);
+ writel_relaxed(st->iclr, iobase + ICLR);
+
+ writel_relaxed(st->icmr, iobase + ICMR);
+ }
+}
+
+static struct syscore_ops sa1100irq_syscore_ops = {
+ .suspend = sa1100irq_suspend,
+ .resume = sa1100irq_resume,
+};
+
+static int __init sa1100irq_init_devicefs(void)
+{
+ register_syscore_ops(&sa1100irq_syscore_ops);
+ return 0;
+}
+
+device_initcall(sa1100irq_init_devicefs);
+
+static asmlinkage void __exception_irq_entry
+sa1100_handle_irq(struct pt_regs *regs)
+{
+ uint32_t icip, icmr, mask;
+
+ do {
+ icip = readl_relaxed(iobase + ICIP);
+ icmr = readl_relaxed(iobase + ICMR);
+ mask = icip & icmr;
+
+ if (mask == 0)
+ break;
+
+ handle_domain_irq(sa1100_normal_irqdomain,
+ ffs(mask) - 1, regs);
+ } while (1);
+}
+
+void __init sa1100_init_irq(void)
+{
+ request_resource(&iomem_resource, &irq_resource);
+
+ iobase = ioremap(irq_resource.start, SZ_64K);
+ if (WARN_ON(!iobase))
+ return;
+
+ /* disable all IRQs */
+ writel_relaxed(0, iobase + ICMR);
+
+ /* all IRQs are IRQ, not FIQ */
+ writel_relaxed(0, iobase + ICLR);
+
+ /*
+ * Whatever the doc says, this has to be set for the wait-on-irq
+ * instruction to work... on a SA1100 rev 9 at least.
+ */
+ writel_relaxed(1, iobase + ICCR);
+
+ sa1100_normal_irqdomain = irq_domain_add_simple(NULL,
+ 32, IRQ_GPIO0_SC,
+ &sa1100_normal_irqdomain_ops, NULL);
+
+ set_handle_irq(sa1100_handle_irq);
+
+ sa1100_init_gpio();
+}
Move current sa11x0 IRQ driver to the irqchip subsystem. The driver is not yet modified to be a proper part of irqchip subsystem, it will be a next step. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> --- arch/arm/mach-sa1100/Makefile | 2 +- arch/arm/mach-sa1100/irq.c | 186 ------------------------------------------ drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-sa11x0.c | 186 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 188 insertions(+), 187 deletions(-) delete mode 100644 arch/arm/mach-sa1100/irq.c create mode 100644 drivers/irqchip/irq-sa11x0.c