| Message ID | 1431282602-7137-6-git-send-email-dev@lynxeye.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sun, May 10, 2015 at 08:30:02PM +0200, Lucas Stach wrote: > This enables the on-module ONFI conformant NAND flash. > > Signed-off-by: Lucas Stach <dev@lynxeye.de> > --- > arch/arm/boot/dts/tegra20-colibri-512.dtsi | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi > index 8e0066a..540b3fd 100644 > --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi > +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi > @@ -455,6 +455,13 @@ > }; > }; > > + nand@70008000 { > + status = "okay"; > + nand-bus-width = <8>; > + nand-on-flash-bbt; > + nvidia,wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>; ^^ Is write-protect support necessary, or just optional? b/c you didn't implement support in the NAND driver yet. > + }; > + > usb@c5004000 { > status = "okay"; > nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) Brian
diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 8e0066a..540b3fd 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -455,6 +455,13 @@ }; }; + nand@70008000 { + status = "okay"; + nand-bus-width = <8>; + nand-on-flash-bbt; + nvidia,wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>; + }; + usb@c5004000 { status = "okay"; nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
This enables the on-module ONFI conformant NAND flash. Signed-off-by: Lucas Stach <dev@lynxeye.de> --- arch/arm/boot/dts/tegra20-colibri-512.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)