@@ -6,7 +6,8 @@ stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o \
obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-platform.o
stmmac-platform-objs:= stmmac_platform.o dwmac-meson.o dwmac-sunxi.o \
- dwmac-sti.o dwmac-socfpga.o dwmac-rk.o
+ dwmac-sti.o dwmac-socfpga.o dwmac-rk.o \
+ dwmac-lpc18xx.o
obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o
stmmac-pci-objs:= stmmac_pci.o
new file mode 100644
@@ -0,0 +1,74 @@
+/*
+ * DWMAC glue for NXP LPC18xx/LPC43xx Ethernet
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+#include <linux/stmmac.h>
+
+/* Register defines for CREG syscon */
+#define LPC18XX_CREG_CREG6 0x12c
+# define LPC18XX_CREG_CREG6_ETHMODE_MASK 0x7
+# define LPC18XX_CREG_CREG6_ETHMODE_MII 0x0
+# define LPC18XX_CREG_CREG6_ETHMODE_RMII 0x4
+
+struct lpc18xx_dwmac_priv_data {
+ struct regmap *reg;
+ int interface;
+};
+
+static void *lpc18xx_dwmac_setup(struct platform_device *pdev)
+{
+ struct lpc18xx_dwmac_priv_data *dwmac;
+
+ dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
+ if (!dwmac)
+ return ERR_PTR(-ENOMEM);
+
+ dwmac->interface = of_get_phy_mode(pdev->dev.of_node);
+ if (dwmac->interface < 0)
+ return ERR_PTR(dwmac->interface);
+
+ dwmac->reg = syscon_regmap_lookup_by_compatible("nxp,lpc1850-creg");
+ if (IS_ERR(dwmac->reg)) {
+ dev_err(&pdev->dev, "Syscon lookup failed\n");
+ return dwmac->reg;
+ }
+
+ return dwmac;
+}
+
+static int lpc18xx_dwmac_init(struct platform_device *pdev, void *priv)
+{
+ struct lpc18xx_dwmac_priv_data *dwmac = priv;
+ u8 ethmode;
+
+ if (dwmac->interface == PHY_INTERFACE_MODE_MII) {
+ ethmode = LPC18XX_CREG_CREG6_ETHMODE_MII;
+ } else if (dwmac->interface == PHY_INTERFACE_MODE_RMII) {
+ ethmode = LPC18XX_CREG_CREG6_ETHMODE_RMII;
+ } else {
+ dev_err(&pdev->dev, "Only MII and RMII mode supported\n");
+ return -EINVAL;
+ }
+
+ regmap_update_bits(dwmac->reg, LPC18XX_CREG_CREG6,
+ LPC18XX_CREG_CREG6_ETHMODE_MASK, ethmode);
+
+ return 0;
+}
+
+const struct stmmac_of_data lpc18xx_dwmac_data = {
+ .has_gmac = 1,
+ .setup = lpc18xx_dwmac_setup,
+ .init = lpc18xx_dwmac_init,
+};
@@ -37,6 +37,7 @@ static const struct of_device_id stmmac_dt_ids[] = {
{ .compatible = "rockchip,rk3288-gmac", .data = &rk3288_gmac_data},
{ .compatible = "amlogic,meson6-dwmac", .data = &meson6_dwmac_data},
{ .compatible = "allwinner,sun7i-a20-gmac", .data = &sun7i_gmac_data},
+ { .compatible = "nxp,lpc1850-dwmac", .data = &lpc18xx_dwmac_data},
{ .compatible = "st,stih415-dwmac", .data = &stih4xx_dwmac_data},
{ .compatible = "st,stih416-dwmac", .data = &stih4xx_dwmac_data},
{ .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data},
@@ -19,6 +19,7 @@
#ifndef __STMMAC_PLATFORM_H__
#define __STMMAC_PLATFORM_H__
+extern const struct stmmac_of_data lpc18xx_dwmac_data;
extern const struct stmmac_of_data meson6_dwmac_data;
extern const struct stmmac_of_data sun7i_gmac_data;
extern const struct stmmac_of_data stih4xx_dwmac_data;
Add support for Ethernet on NXP LPC18xx and LPC43xx using the dwmac driver. This glue is required to setup phy interface mode, MII or RMII, on the SoC. Signed-off-by: Joachim Eastwood <manabian@gmail.com> --- drivers/net/ethernet/stmicro/stmmac/Makefile | 3 +- .../net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c | 74 ++++++++++++++++++++++ .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 + .../net/ethernet/stmicro/stmmac/stmmac_platform.h | 1 + 4 files changed, 78 insertions(+), 1 deletion(-) create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c