@@ -36,6 +36,14 @@ config DWMAC_GENERIC
platform specific code to function or is using platform
data for setup.
+config DWMAC_LPC18XX
+ tristate "NXP LPC18xx/43xx DWMAC support"
+ default ARCH_LPC18XX
+ depends on OF
+ select MFD_SYSCON
+ ---help---
+ Support for NXP LPC18xx/43xx DWMAC Ethernet.
+
endif
config STMMAC_PCI
@@ -6,10 +6,10 @@ stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o \
# Ordering matters. Generic driver must be last.
obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-platform.o
+obj-$(CONFIG_DWMAC_LPC18XX) += dwmac-lpc18xx.o
obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o
stmmac-platform-objs:= stmmac_platform.o dwmac-meson.o dwmac-sunxi.o \
dwmac-sti.o dwmac-socfpga.o dwmac-rk.o \
- dwmac-lpc18xx.o
obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o
stmmac-pci-objs:= stmmac_pci.o
@@ -9,12 +9,16 @@
*/
#include <linux/mfd/syscon.h>
+#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_net.h>
#include <linux/phy.h>
+#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/stmmac.h>
+#include "stmmac_platform.h"
+
/* Register defines for CREG syscon */
#define LPC18XX_CREG_CREG6 0x12c
# define LPC18XX_CREG_CREG6_ETHMODE_MASK 0x7
@@ -67,8 +71,29 @@ static int lpc18xx_dwmac_init(struct platform_device *pdev, void *priv)
return 0;
}
-const struct stmmac_of_data lpc18xx_dwmac_data = {
+static const struct stmmac_of_data lpc18xx_dwmac_data = {
.has_gmac = 1,
.setup = lpc18xx_dwmac_setup,
.init = lpc18xx_dwmac_init,
};
+
+static const struct of_device_id lpc18xx_dwmac_match[] = {
+ { .compatible = "nxp,lpc1850-dwmac", .data = &lpc18xx_dwmac_data },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_dwmac_match);
+
+static struct platform_driver lpc18xx_dwmac_driver = {
+ .probe = stmmac_pltfr_probe,
+ .remove = stmmac_pltfr_remove,
+ .driver = {
+ .name = "lpc18xx-dwmac",
+ .pm = &stmmac_pltfr_pm_ops,
+ .of_match_table = lpc18xx_dwmac_match,
+ },
+};
+module_platform_driver(lpc18xx_dwmac_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_DESCRIPTION("DWMAC glue for LPC18xx/43xx Ethernet");
+MODULE_LICENSE("GPL v2");
@@ -37,7 +37,6 @@ static const struct of_device_id stmmac_dt_ids[] = {
{ .compatible = "rockchip,rk3288-gmac", .data = &rk3288_gmac_data},
{ .compatible = "amlogic,meson6-dwmac", .data = &meson6_dwmac_data},
{ .compatible = "allwinner,sun7i-a20-gmac", .data = &sun7i_gmac_data},
- { .compatible = "nxp,lpc1850-dwmac", .data = &lpc18xx_dwmac_data},
{ .compatible = "st,stih415-dwmac", .data = &stih4xx_dwmac_data},
{ .compatible = "st,stih416-dwmac", .data = &stih4xx_dwmac_data},
{ .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data},
@@ -23,7 +23,6 @@ int stmmac_pltfr_probe(struct platform_device *pdev);
int stmmac_pltfr_remove(struct platform_device *pdev);
extern const struct dev_pm_ops stmmac_pltfr_pm_ops;
-extern const struct stmmac_of_data lpc18xx_dwmac_data;
extern const struct stmmac_of_data meson6_dwmac_data;
extern const struct stmmac_of_data sun7i_gmac_data;
extern const struct stmmac_of_data stih4xx_dwmac_data;
Convert platform glue layer into a proper platform driver and add it to the build system. Signed-off-by: Joachim Eastwood <manabian@gmail.com> --- drivers/net/ethernet/stmicro/stmmac/Kconfig | 8 +++++++ drivers/net/ethernet/stmicro/stmmac/Makefile | 2 +- .../net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c | 27 +++++++++++++++++++++- .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 - .../net/ethernet/stmicro/stmmac/stmmac_platform.h | 1 - 5 files changed, 35 insertions(+), 4 deletions(-)