[11/14] ARM: berlin: move BG2CD clock node

Commit Message

Sebastian Hesselbarth May 16, 2015, 12:23 a.m. UTC

From: Antoine Tenart <[e-mail]>

With the introduction of the Berlin simple-mfd controller driver, all
drivers previously sharing the chip and system controller nodes now
have their own sub-node.

Signed-off-by: Antoine Tenart <[e-mail]>
Signed-off-by: Sebastian Hesselbarth <[e-mail]>
---
Cc: Stephen Boyd <[e-mail]>
---
 arch/arm/boot/dts/berlin2cd.dtsi | 38 +++++++++++++++++++++-----------------
 1 file changed, 21 insertions(+), 17 deletions(-)

Comments

Stephen Boyd June 4, 2015, 6:56 p.m. UTC | #1

On 05/16, Sebastian Hesselbarth wrote:
> From: Antoine Tenart <[e-mail]>
> 
> With the introduction of the Berlin simple-mfd controller driver, all
> drivers previously sharing the chip and system controller nodes now
> have their own sub-node.
> 
> Signed-off-by: Antoine Tenart <[e-mail]>
> Signed-off-by: Sebastian Hesselbarth <[e-mail]>
> ---

Acked-by: Stephen Boyd <[e-mail]>

Patch

diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 7544fea43e3a..6ff0194cf77d 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -53,7 +53,7 @@ 
 		sdhci0: sdhci@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
-			clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+			clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
 			clock-names = "io", "core";
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -77,7 +77,7 @@ 
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&chip CLKID_TWD>;
+			clocks = <&chip_clk CLKID_TWD>;
 		};
 
 		usb_phy0: usb-phy@b74000 {
@@ -99,7 +99,7 @@ 
 		eth1: ethernet@b90000 {
 			compatible = "marvell,pxa168-eth";
 			reg = <0xb90000 0x10000>;
-			clocks = <&chip CLKID_GETH1>;
+			clocks = <&chip_clk CLKID_GETH1>;
 			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 			/* set by bootloader */
 			local-mac-address = [00 00 00 00 00 00];
@@ -117,7 +117,7 @@ 
 		eth0: ethernet@e50000 {
 			compatible = "marvell,pxa168-eth";
 			reg = <0xe50000 0x10000>;
-			clocks = <&chip CLKID_GETH0>;
+			clocks = <&chip_clk CLKID_GETH0>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			/* set by bootloader */
 			local-mac-address = [00 00 00 00 00 00];
@@ -216,7 +216,7 @@ 
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c00 0x14>;
 				interrupts = <8>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -225,7 +225,7 @@ 
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c14 0x14>;
 				interrupts = <9>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "okay";
 			};
@@ -234,7 +234,7 @@ 
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c28 0x14>;
 				interrupts = <10>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -243,7 +243,7 @@ 
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c3c 0x14>;
 				interrupts = <11>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -252,7 +252,7 @@ 
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c50 0x14>;
 				interrupts = <12>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -261,7 +261,7 @@ 
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c64 0x14>;
 				interrupts = <13>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -270,7 +270,7 @@ 
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c78 0x14>;
 				interrupts = <14>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -279,7 +279,7 @@ 
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c8c 0x14>;
 				interrupts = <15>;
-				clocks = <&chip CLKID_CFG>;
+				clocks = <&chip_clk CLKID_CFG>;
 				clock-names = "timer";
 				status = "disabled";
 			};
@@ -296,10 +296,14 @@ 
 
 		chip: chip-control@ea0000 {
 			compatible = "marvell,berlin2cd-chip-ctrl", "simple-mfd", "syscon";
-			#clock-cells = <1>;
 			reg = <0xea0000 0x400>;
-			clocks = <&refclk>;
-			clock-names = "refclk";
+
+			chip_clk: clock {
+				compatible = "marvell,berlin2-clk";
+				#clock-cells = <1>;
+				clocks = <&refclk>;
+				clock-names = "refclk";
+			};
 
 			soc_pinctrl: pin-controller {
 				compatible = "marvell,berlin2cd-soc-pinctrl";
@@ -320,7 +324,7 @@ 
 			compatible = "chipidea,usb2";
 			reg = <0xed0000 0x200>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_USB0>;
+			clocks = <&chip_clk CLKID_USB0>;
 			phys = <&usb_phy0>;
 			phy-names = "usb-phy";
 			status = "disabled";
@@ -330,7 +334,7 @@ 
 			compatible = "chipidea,usb2";
 			reg = <0xee0000 0x200>;
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_USB1>;
+			clocks = <&chip_clk CLKID_USB1>;
 			phys = <&usb_phy1>;
 			phy-names = "usb-phy";
 			status = "disabled";