@@ -975,11 +975,6 @@ config PLAT_PXA
config PLAT_VERSATILE
bool
-config ARM_TIMER_SP804
- bool
- select CLKSRC_MMIO
- select CLKSRC_OF if OF
-
source "arch/arm/firmware/Kconfig"
source arch/arm/mm/Kconfig
@@ -11,7 +11,6 @@ obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o
-obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o
obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
CFLAGS_REMOVE_mcpm_entry.o = -pg
AFLAGS_mcpm_head.o := -march=armv7-a
@@ -22,8 +22,6 @@
#include <asm/mach-types.h>
#include <asm/mach/map.h>
-#include <asm/hardware/timer-sp.h>
-
#include "mmio.h"
#include "clcd.h"
@@ -35,6 +35,8 @@
#include <linux/mtd/physmap.h>
#include <linux/memblock.h>
+#include <clocksource/timer-sp804.h>
+
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
@@ -44,10 +46,8 @@
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
-
#include <mach/platform.h>
#include <mach/irqs.h>
-#include <asm/hardware/timer-sp.h>
#include <plat/sched_clock.h>
@@ -41,6 +41,8 @@
#include <linux/bitops.h>
#include <linux/reboot.h>
+#include <clocksource/timer-sp804.h>
+
#include <asm/irq.h>
#include <asm/hardware/icst.h>
#include <asm/mach-types.h>
@@ -51,7 +53,6 @@
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/platform.h>
-#include <asm/hardware/timer-sp.h>
#include <plat/sched_clock.h>
@@ -132,6 +132,11 @@ config ARM_GLOBAL_TIMER
help
This options enables support for the ARM global timer unit
+config ARM_TIMER_SP804
+ bool "Support for Dual Timer SP804 module"
+ select CLKSRC_MMIO
+ select CLKSRC_OF if OF
+
config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
bool
depends on ARM_GLOBAL_TIMER
@@ -45,6 +45,7 @@ obj-$(CONFIG_MTK_TIMER) += mtk_timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
+obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp804.o
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o
obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o
obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o
@@ -26,7 +26,8 @@
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/sched_clock.h>
-#include <asm/hardware/arm_timer.h>
+
+#include "timer-sp.h"
static void __iomem * sched_clk_base;
similarity index 93%
rename from arch/arm/include/asm/hardware/arm_timer.h
rename to drivers/clocksource/timer-sp.h
@@ -1,6 +1,3 @@
-#ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H
-#define __ASM_ARM_HARDWARE_ARM_TIMER_H
-
/*
* ARM timer implementation, found in Integrator, Versatile and Realview
* platforms. Not all platforms support all registers and bits in these
@@ -31,5 +28,3 @@
#define TIMER_RIS 0x10 /* CVR ro */
#define TIMER_MIS 0x14 /* CVR ro */
#define TIMER_BGLOAD 0x18 /* CVR rw */
-
-#endif
similarity index 98%
rename from arch/arm/common/timer-sp.c
rename to drivers/clocksource/timer-sp804.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/common/timer-sp.c
+ * linux/drivers/clocksource/timer-sp.c
*
* Copyright (C) 1999 - 2003 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
@@ -30,8 +30,9 @@
#include <linux/of_irq.h>
#include <linux/sched_clock.h>
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/timer-sp.h>
+#include <clocksource/timer-sp804.h>
+
+#include "timer-sp.h"
static long __init sp804_get_clock_rate(struct clk *clk)
{
similarity index 90%
rename from arch/arm/include/asm/hardware/timer-sp.h
rename to include/clocksource/timer-sp804.h
@@ -1,3 +1,6 @@
+#ifndef __CLKSOURCE_TIMER_SP804_H
+#define __CLKSOURCE_TIMER_SP804_H
+
struct clk;
void __sp804_clocksource_and_sched_clock_init(void __iomem *,
@@ -22,3 +25,4 @@ static inline void sp804_clockevents_init(void __iomem *base, unsigned int irq,
__sp804_clockevents_init(base, irq, NULL, name);
}
+#endif
The ARM Dual-Timer SP804 module is peripheral found not only on ARM32 platforms but also on ARM64 platforms. This patch moves the driver out of arch/arm to driver/clocksource so that it can be used on ARM64 platforms also. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <robh@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Olof Johansson <olof@lixom.net> --- arch/arm/Kconfig | 5 ----- arch/arm/common/Makefile | 1 - arch/arm/mach-nspire/nspire.c | 2 -- arch/arm/mach-realview/core.c | 4 ++-- arch/arm/mach-versatile/core.c | 3 ++- drivers/clocksource/Kconfig | 5 +++++ drivers/clocksource/Makefile | 1 + drivers/clocksource/timer-integrator-ap.c | 3 ++- .../asm/hardware/arm_timer.h => drivers/clocksource/timer-sp.h | 5 ----- arch/arm/common/timer-sp.c => drivers/clocksource/timer-sp804.c | 7 ++++--- .../asm/hardware/timer-sp.h => include/clocksource/timer-sp804.h | 4 ++++ 11 files changed, 20 insertions(+), 20 deletions(-) rename arch/arm/include/asm/hardware/arm_timer.h => drivers/clocksource/timer-sp.h (93%) rename arch/arm/common/timer-sp.c => drivers/clocksource/timer-sp804.c (98%) rename arch/arm/include/asm/hardware/timer-sp.h => include/clocksource/timer-sp804.h (90%) -- 1.9.1