@@ -34,6 +34,14 @@
#include <linux/ptp_clock_kernel.h>
#include <linux/reset.h>
+struct stmmac_resources {
+ void __iomem *addr;
+ const char *mac;
+ int wol_irq;
+ int lpi_irq;
+ int irq;
+};
+
struct stmmac_tx_info {
dma_addr_t buf;
bool map_as_page;
@@ -131,7 +139,7 @@ int stmmac_suspend(struct net_device *ndev);
int stmmac_dvr_remove(struct net_device *ndev);
struct stmmac_priv *stmmac_dvr_probe(struct device *device,
struct plat_stmmacenet_data *plat_dat,
- void __iomem *addr);
+ struct stmmac_resources *res);
void stmmac_disable_eee_mode(struct stmmac_priv *priv);
bool stmmac_eee_init(struct stmmac_priv *priv);
@@ -2799,7 +2799,7 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
* stmmac_dvr_probe
* @device: device pointer
* @plat_dat: platform data pointer
- * @addr: iobase memory address
+ * @res: stmmac resource pointer
* Description: this is the main probe function used to
* call the alloc_etherdev, allocate the priv structure.
* Return:
@@ -2808,7 +2808,7 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
*/
struct stmmac_priv *stmmac_dvr_probe(struct device *device,
struct plat_stmmacenet_data *plat_dat,
- void __iomem *addr)
+ struct stmmac_resources *res)
{
int ret = 0;
struct net_device *ndev = NULL;
@@ -2827,8 +2827,15 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
stmmac_set_ethtool_ops(ndev);
priv->pause = pause;
priv->plat = plat_dat;
- priv->ioaddr = addr;
- priv->dev->base_addr = (unsigned long)addr;
+ priv->ioaddr = res->addr;
+ priv->dev->base_addr = (unsigned long)res->addr;
+
+ priv->dev->irq = res->irq;
+ priv->wol_irq = res->wol_irq;
+ priv->lpi_irq = res->lpi_irq;
+
+ if (res->mac)
+ memcpy(priv->dev->dev_addr, res->mac, ETH_ALEN);
dev_set_drvdata(device, priv);
@@ -163,6 +163,7 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
{
struct stmmac_pci_info *info = (struct stmmac_pci_info *)id->driver_data;
struct plat_stmmacenet_data *plat;
+ struct stmmac_resources res;
struct stmmac_priv *priv;
int i;
int ret;
@@ -214,13 +215,16 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
pci_enable_msi(pdev);
- priv = stmmac_dvr_probe(&pdev->dev, plat, pcim_iomap_table(pdev)[i]);
+ memset(&res, 0, sizeof(res));
+ res.addr = pcim_iomap_table(pdev)[i];
+ res.wol_irq = pdev->irq;
+ res.irq = pdev->irq;
+
+ priv = stmmac_dvr_probe(&pdev->dev, plat, &res);
if (IS_ERR(priv)) {
dev_err(&pdev->dev, "%s: main driver probe failed\n", __func__);
return PTR_ERR(priv);
}
- priv->dev->irq = pdev->irq;
- priv->wol_irq = pdev->irq;
dev_dbg(&pdev->dev, "STMMAC PCI driver registration completed\n");
@@ -251,25 +251,25 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
*/
int stmmac_pltfr_probe(struct platform_device *pdev)
{
+ struct stmmac_resources stmmac_res;
int ret = 0;
struct resource *res;
struct device *dev = &pdev->dev;
- void __iomem *addr = NULL;
struct stmmac_priv *priv = NULL;
struct plat_stmmacenet_data *plat_dat = NULL;
- const char *mac = NULL;
- int irq, wol_irq, lpi_irq;
+
+ memset(&stmmac_res, 0, sizeof(stmmac_res));
/* Get IRQ information early to have an ability to ask for deferred
* probe if needed before we went too far with resource allocation.
*/
- irq = platform_get_irq_byname(pdev, "macirq");
- if (irq < 0) {
- if (irq != -EPROBE_DEFER) {
+ stmmac_res.irq = platform_get_irq_byname(pdev, "macirq");
+ if (stmmac_res.irq < 0) {
+ if (stmmac_res.irq != -EPROBE_DEFER) {
dev_err(dev,
"MAC IRQ configuration information not found\n");
}
- return irq;
+ return stmmac_res.irq;
}
/* On some platforms e.g. SPEAr the wake up irq differs from the mac irq
@@ -279,21 +279,21 @@ int stmmac_pltfr_probe(struct platform_device *pdev)
* In case the wake up interrupt is not passed from the platform
* so the driver will continue to use the mac irq (ndev->irq)
*/
- wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq");
- if (wol_irq < 0) {
- if (wol_irq == -EPROBE_DEFER)
+ stmmac_res.wol_irq = platform_get_irq_byname(pdev, "eth_wake_irq");
+ if (stmmac_res.wol_irq < 0) {
+ if (stmmac_res.wol_irq == -EPROBE_DEFER)
return -EPROBE_DEFER;
- wol_irq = irq;
+ stmmac_res.wol_irq = stmmac_res.irq;
}
- lpi_irq = platform_get_irq_byname(pdev, "eth_lpi");
- if (lpi_irq == -EPROBE_DEFER)
+ stmmac_res.lpi_irq = platform_get_irq_byname(pdev, "eth_lpi");
+ if (stmmac_res.lpi_irq == -EPROBE_DEFER)
return -EPROBE_DEFER;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- addr = devm_ioremap_resource(dev, res);
- if (IS_ERR(addr))
- return PTR_ERR(addr);
+ stmmac_res.addr = devm_ioremap_resource(dev, res);
+ if (IS_ERR(stmmac_res.addr))
+ return PTR_ERR(stmmac_res.addr);
plat_dat = dev_get_platdata(&pdev->dev);
@@ -313,7 +313,7 @@ int stmmac_pltfr_probe(struct platform_device *pdev)
plat_dat->unicast_filter_entries = 1;
if (pdev->dev.of_node) {
- ret = stmmac_probe_config_dt(pdev, plat_dat, &mac);
+ ret = stmmac_probe_config_dt(pdev, plat_dat, &stmmac_res.mac);
if (ret) {
pr_err("%s: main dt probe failed", __func__);
return ret;
@@ -334,21 +334,12 @@ int stmmac_pltfr_probe(struct platform_device *pdev)
return ret;
}
- priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, addr);
+ priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, &stmmac_res);
if (IS_ERR(priv)) {
pr_err("%s: main driver probe failed", __func__);
return PTR_ERR(priv);
}
- /* Copy IRQ values to priv structure which is now avaialble */
- priv->dev->irq = irq;
- priv->wol_irq = wol_irq;
- priv->lpi_irq = lpi_irq;
-
- /* Get MAC address if available (DT) */
- if (mac)
- memcpy(priv->dev->dev_addr, mac, ETH_ALEN);
-
pr_debug("STMMAC platform driver registration completed");
return 0;
Creat a struct that contain all the resources that needs to be assigned to the priv struct in stmmac_dvr_probe. This makes it possible to factor out more common code from the other probe functions and also use this struct to hold the resources as they are fetched. Signed-off-by: Joachim Eastwood <manabian@gmail.com> --- drivers/net/ethernet/stmicro/stmmac/stmmac.h | 10 ++++- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 ++++++-- drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 10 +++-- .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 45 +++++++++------------- 4 files changed, 45 insertions(+), 35 deletions(-)