diff mbox

[PATCHv2,4/4] arm: socfpga: dts: Arria10 SDRAM EDAC DTS additions.

Message ID 1433428128-7292-5-git-send-email-tthayer@opensource.altera.com (mailing list archive)
State New, archived
Headers show

Commit Message

tthayer@opensource.altera.com June 4, 2015, 2:28 p.m. UTC 
From: Thor Thayer <tthayer@opensource.altera.com>

Support for the Arria10 SDRAM EDAC is added to the device tree.
Update the bindings document for the new match string.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
v2: Change subject description format.
---
 .../bindings/arm/altera/socfpga-sdram-edac.txt     |    2 +-
 arch/arm/boot/dts/socfpga_arria10.dtsi             |   11 +++++++++++
 2 files changed, 12 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
index d0ce01d..f5ad0ff 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
@@ -2,7 +2,7 @@  Altera SOCFPGA SDRAM Error Detection & Correction [EDAC]
 The EDAC accesses a range of registers in the SDRAM controller.
 
 Required properties:
-- compatible : should contain "altr,sdram-edac";
+- compatible : should contain "altr,sdram-edac" or "altr,sdram-edac-a10"
 - altr,sdr-syscon : phandle of the sdr module
 - interrupts : Should contain the SDRAM ECC IRQ in the
 	appropriate format for the IRQ controller.
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index f5bebdd..4779b07 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -548,6 +548,17 @@ 
 			status = "disabled";
 		};
 
+		sdr: sdr@ffc25000 {
+			compatible = "syscon";
+			reg = <0xffcfb100 0x80>;
+		};
+
+		sdramedac {
+			compatible = "altr,sdram-edac-a10";
+			altr,sdr-syscon = <&sdr>;
+			interrupts = <0 2 4>, <0 0 4>;
+		};
+
 		L2: l2-cache@fffff000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffff000 0x1000>;