| Message ID | 1434628373-11834-4-git-send-email-simon.guinot@sequanux.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Simon, On 18/06/2015 13:52, Simon Guinot wrote: > Since DT support is now available for the LEDs found on the LaCie > netxbig boards (Kirkwood-based), then the old-fashion netxbig board > setup file is no longer needed. This patch removes this file. > > Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Thanks, Gregory > --- > arch/arm/mach-mvebu/Kconfig | 7 -- > arch/arm/mach-mvebu/Makefile | 1 - > arch/arm/mach-mvebu/board.h | 21 ----- > arch/arm/mach-mvebu/kirkwood.c | 4 - > arch/arm/mach-mvebu/netxbig.c | 191 ----------------------------------------- > 5 files changed, 224 deletions(-) > delete mode 100644 arch/arm/mach-mvebu/board.h > delete mode 100644 arch/arm/mach-mvebu/netxbig.c > > diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig > index c1e4567a5ab3..e58020bc80c0 100644 > --- a/arch/arm/mach-mvebu/Kconfig > +++ b/arch/arm/mach-mvebu/Kconfig > @@ -102,11 +102,4 @@ config MACH_KIRKWOOD > Say 'Y' here if you want your kernel to support boards based > on the Marvell Kirkwood device tree. > > -config MACH_NETXBIG > - bool "LaCie 2Big and 5Big Network v2" > - depends on MACH_KIRKWOOD > - help > - Say 'Y' here if you want your kernel to support the > - LaCie 2Big and 5Big Network v2 > - > endif > diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile > index b4f01497ce0b..ecf9e0c3b107 100644 > --- a/arch/arm/mach-mvebu/Makefile > +++ b/arch/arm/mach-mvebu/Makefile > @@ -13,4 +13,3 @@ endif > > obj-$(CONFIG_MACH_DOVE) += dove.o > obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o > -obj-$(CONFIG_MACH_NETXBIG) += netxbig.o > diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h > deleted file mode 100644 > index 98e32cc2ef3d..000000000000 > --- a/arch/arm/mach-mvebu/board.h > +++ /dev/null > @@ -1,21 +0,0 @@ > -/* > - * Board functions for Marvell System On Chip > - * > - * Copyright (C) 2014 > - * > - * Andrew Lunn <andrew@lunn.ch> > - * > - * This file is licensed under the terms of the GNU General Public > - * License version 2. This program is licensed "as is" without any > - * warranty of any kind, whether express or implied. > - */ > - > -#ifndef __ARCH_MVEBU_BOARD_H > -#define __ARCH_MVEBU_BOARD_H > - > -#ifdef CONFIG_MACH_NETXBIG > -void netxbig_init(void); > -#else > -static inline void netxbig_init(void) {}; > -#endif > -#endif > diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c > index 6b5310828eb2..e81b33dc57d8 100644 > --- a/arch/arm/mach-mvebu/kirkwood.c > +++ b/arch/arm/mach-mvebu/kirkwood.c > @@ -25,7 +25,6 @@ > #include "kirkwood.h" > #include "kirkwood-pm.h" > #include "common.h" > -#include "board.h" > > static struct resource kirkwood_cpufreq_resources[] = { > [0] = { > @@ -180,9 +179,6 @@ static void __init kirkwood_dt_init(void) > kirkwood_pm_init(); > kirkwood_dt_eth_fixup(); > > - if (of_machine_is_compatible("lacie,netxbig")) > - netxbig_init(); > - > of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL); > } > > diff --git a/arch/arm/mach-mvebu/netxbig.c b/arch/arm/mach-mvebu/netxbig.c > deleted file mode 100644 > index 94b11b6585a4..000000000000 > --- a/arch/arm/mach-mvebu/netxbig.c > +++ /dev/null > @@ -1,191 +0,0 @@ > -/* > - * arch/arm/mach-mvbu/board-netxbig.c > - * > - * LaCie 2Big and 5Big Network v2 board setup > - * > - * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License as published by > - * the Free Software Foundation; either version 2 of the License, or > - * (at your option) any later version. > - * > - * This program is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - */ > - > -#include <linux/kernel.h> > -#include <linux/of.h> > -#include <linux/platform_device.h> > -#include <linux/platform_data/leds-kirkwood-netxbig.h> > -#include "common.h" > - > -/***************************************************************************** > - * GPIO extension LEDs > - ****************************************************************************/ > - > -/* > - * The LEDs are controlled by a CPLD and can be configured through a GPIO > - * extension bus: > - * > - * - address register : bit [0-2] -> GPIO [47-49] > - * - data register : bit [0-2] -> GPIO [44-46] > - * - enable register : GPIO 29 > - */ > - > -static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 }; > -static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 }; > - > -static struct netxbig_gpio_ext netxbig_v2_gpio_ext = { > - .addr = netxbig_v2_gpio_ext_addr, > - .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr), > - .data = netxbig_v2_gpio_ext_data, > - .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data), > - .enable = 29, > -}; > - > -/* > - * Address register selection: > - * > - * addr | register > - * ---------------------------- > - * 0 | front LED > - * 1 | front LED brightness > - * 2 | SATA LED brightness > - * 3 | SATA0 LED > - * 4 | SATA1 LED > - * 5 | SATA2 LED > - * 6 | SATA3 LED > - * 7 | SATA4 LED > - * > - * Data register configuration: > - * > - * data | LED brightness > - * ------------------------------------------------- > - * 0 | min (off) > - * - | - > - * 7 | max > - * > - * data | front LED mode > - * ------------------------------------------------- > - * 0 | fix off > - * 1 | fix blue on > - * 2 | fix red on > - * 3 | blink blue on=1 sec and blue off=1 sec > - * 4 | blink red on=1 sec and red off=1 sec > - * 5 | blink blue on=2.5 sec and red on=0.5 sec > - * 6 | blink blue on=1 sec and red on=1 sec > - * 7 | blink blue on=0.5 sec and blue off=2.5 sec > - * > - * data | SATA LED mode > - * ------------------------------------------------- > - * 0 | fix off > - * 1 | SATA activity blink > - * 2 | fix red on > - * 3 | blink blue on=1 sec and blue off=1 sec > - * 4 | blink red on=1 sec and red off=1 sec > - * 5 | blink blue on=2.5 sec and red on=0.5 sec > - * 6 | blink blue on=1 sec and red on=1 sec > - * 7 | fix blue on > - */ > - > -static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = { > - [NETXBIG_LED_OFF] = 0, > - [NETXBIG_LED_ON] = 2, > - [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, > - [NETXBIG_LED_TIMER1] = 4, > - [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, > -}; > - > -static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = { > - [NETXBIG_LED_OFF] = 0, > - [NETXBIG_LED_ON] = 1, > - [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, > - [NETXBIG_LED_TIMER1] = 3, > - [NETXBIG_LED_TIMER2] = 7, > -}; > - > -static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = { > - [NETXBIG_LED_OFF] = 0, > - [NETXBIG_LED_ON] = 7, > - [NETXBIG_LED_SATA] = 1, > - [NETXBIG_LED_TIMER1] = 3, > - [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, > -}; > - > -static struct netxbig_led_timer netxbig_v2_led_timer[] = { > - [0] = { > - .delay_on = 500, > - .delay_off = 500, > - .mode = NETXBIG_LED_TIMER1, > - }, > - [1] = { > - .delay_on = 500, > - .delay_off = 1000, > - .mode = NETXBIG_LED_TIMER2, > - }, > -}; > - > -#define NETXBIG_LED(_name, maddr, mval, baddr) \ > - { .name = _name, \ > - .mode_addr = maddr, \ > - .mode_val = mval, \ > - .bright_addr = baddr } > - > -static struct netxbig_led net2big_v2_leds_ctrl[] = { > - NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), > - NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1), > - NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), > - NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), > - NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), > - NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), > -}; > - > -static struct netxbig_led_platform_data net2big_v2_leds_data = { > - .gpio_ext = &netxbig_v2_gpio_ext, > - .timer = netxbig_v2_led_timer, > - .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), > - .leds = net2big_v2_leds_ctrl, > - .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl), > -}; > - > -static struct netxbig_led net5big_v2_leds_ctrl[] = { > - NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), > - NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1), > - NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), > - NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), > - NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), > - NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), > - NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2), > - NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2), > - NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2), > - NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2), > - NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2), > - NETXBIG_LED("net5big-v2:red:sata4", 7, netxbig_v2_red_mled, 2), > -}; > - > -static struct netxbig_led_platform_data net5big_v2_leds_data = { > - .gpio_ext = &netxbig_v2_gpio_ext, > - .timer = netxbig_v2_led_timer, > - .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), > - .leds = net5big_v2_leds_ctrl, > - .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl), > -}; > - > -static struct platform_device netxbig_v2_leds = { > - .name = "leds-netxbig", > - .id = -1, > - .dev = { > - .platform_data = &net2big_v2_leds_data, > - }, > -}; > - > -void __init netxbig_init(void) > -{ > - > - if (of_machine_is_compatible("lacie,net5big_v2")) > - netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data; > - platform_device_register(&netxbig_v2_leds); > -} >
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index c1e4567a5ab3..e58020bc80c0 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -102,11 +102,4 @@ config MACH_KIRKWOOD Say 'Y' here if you want your kernel to support boards based on the Marvell Kirkwood device tree. -config MACH_NETXBIG - bool "LaCie 2Big and 5Big Network v2" - depends on MACH_KIRKWOOD - help - Say 'Y' here if you want your kernel to support the - LaCie 2Big and 5Big Network v2 - endif diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index b4f01497ce0b..ecf9e0c3b107 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -13,4 +13,3 @@ endif obj-$(CONFIG_MACH_DOVE) += dove.o obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o -obj-$(CONFIG_MACH_NETXBIG) += netxbig.o diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h deleted file mode 100644 index 98e32cc2ef3d..000000000000 --- a/arch/arm/mach-mvebu/board.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Board functions for Marvell System On Chip - * - * Copyright (C) 2014 - * - * Andrew Lunn <andrew@lunn.ch> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ARCH_MVEBU_BOARD_H -#define __ARCH_MVEBU_BOARD_H - -#ifdef CONFIG_MACH_NETXBIG -void netxbig_init(void); -#else -static inline void netxbig_init(void) {}; -#endif -#endif diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index 6b5310828eb2..e81b33dc57d8 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -25,7 +25,6 @@ #include "kirkwood.h" #include "kirkwood-pm.h" #include "common.h" -#include "board.h" static struct resource kirkwood_cpufreq_resources[] = { [0] = { @@ -180,9 +179,6 @@ static void __init kirkwood_dt_init(void) kirkwood_pm_init(); kirkwood_dt_eth_fixup(); - if (of_machine_is_compatible("lacie,netxbig")) - netxbig_init(); - of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL); } diff --git a/arch/arm/mach-mvebu/netxbig.c b/arch/arm/mach-mvebu/netxbig.c deleted file mode 100644 index 94b11b6585a4..000000000000 --- a/arch/arm/mach-mvebu/netxbig.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * arch/arm/mach-mvbu/board-netxbig.c - * - * LaCie 2Big and 5Big Network v2 board setup - * - * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/platform_data/leds-kirkwood-netxbig.h> -#include "common.h" - -/***************************************************************************** - * GPIO extension LEDs - ****************************************************************************/ - -/* - * The LEDs are controlled by a CPLD and can be configured through a GPIO - * extension bus: - * - * - address register : bit [0-2] -> GPIO [47-49] - * - data register : bit [0-2] -> GPIO [44-46] - * - enable register : GPIO 29 - */ - -static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 }; -static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 }; - -static struct netxbig_gpio_ext netxbig_v2_gpio_ext = { - .addr = netxbig_v2_gpio_ext_addr, - .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr), - .data = netxbig_v2_gpio_ext_data, - .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data), - .enable = 29, -}; - -/* - * Address register selection: - * - * addr | register - * ---------------------------- - * 0 | front LED - * 1 | front LED brightness - * 2 | SATA LED brightness - * 3 | SATA0 LED - * 4 | SATA1 LED - * 5 | SATA2 LED - * 6 | SATA3 LED - * 7 | SATA4 LED - * - * Data register configuration: - * - * data | LED brightness - * ------------------------------------------------- - * 0 | min (off) - * - | - - * 7 | max - * - * data | front LED mode - * ------------------------------------------------- - * 0 | fix off - * 1 | fix blue on - * 2 | fix red on - * 3 | blink blue on=1 sec and blue off=1 sec - * 4 | blink red on=1 sec and red off=1 sec - * 5 | blink blue on=2.5 sec and red on=0.5 sec - * 6 | blink blue on=1 sec and red on=1 sec - * 7 | blink blue on=0.5 sec and blue off=2.5 sec - * - * data | SATA LED mode - * ------------------------------------------------- - * 0 | fix off - * 1 | SATA activity blink - * 2 | fix red on - * 3 | blink blue on=1 sec and blue off=1 sec - * 4 | blink red on=1 sec and red off=1 sec - * 5 | blink blue on=2.5 sec and red on=0.5 sec - * 6 | blink blue on=1 sec and red on=1 sec - * 7 | fix blue on - */ - -static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = { - [NETXBIG_LED_OFF] = 0, - [NETXBIG_LED_ON] = 2, - [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, - [NETXBIG_LED_TIMER1] = 4, - [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, -}; - -static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = { - [NETXBIG_LED_OFF] = 0, - [NETXBIG_LED_ON] = 1, - [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, - [NETXBIG_LED_TIMER1] = 3, - [NETXBIG_LED_TIMER2] = 7, -}; - -static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = { - [NETXBIG_LED_OFF] = 0, - [NETXBIG_LED_ON] = 7, - [NETXBIG_LED_SATA] = 1, - [NETXBIG_LED_TIMER1] = 3, - [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, -}; - -static struct netxbig_led_timer netxbig_v2_led_timer[] = { - [0] = { - .delay_on = 500, - .delay_off = 500, - .mode = NETXBIG_LED_TIMER1, - }, - [1] = { - .delay_on = 500, - .delay_off = 1000, - .mode = NETXBIG_LED_TIMER2, - }, -}; - -#define NETXBIG_LED(_name, maddr, mval, baddr) \ - { .name = _name, \ - .mode_addr = maddr, \ - .mode_val = mval, \ - .bright_addr = baddr } - -static struct netxbig_led net2big_v2_leds_ctrl[] = { - NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), - NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1), - NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), - NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), -}; - -static struct netxbig_led_platform_data net2big_v2_leds_data = { - .gpio_ext = &netxbig_v2_gpio_ext, - .timer = netxbig_v2_led_timer, - .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), - .leds = net2big_v2_leds_ctrl, - .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl), -}; - -static struct netxbig_led net5big_v2_leds_ctrl[] = { - NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), - NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1), - NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata4", 7, netxbig_v2_red_mled, 2), -}; - -static struct netxbig_led_platform_data net5big_v2_leds_data = { - .gpio_ext = &netxbig_v2_gpio_ext, - .timer = netxbig_v2_led_timer, - .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), - .leds = net5big_v2_leds_ctrl, - .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl), -}; - -static struct platform_device netxbig_v2_leds = { - .name = "leds-netxbig", - .id = -1, - .dev = { - .platform_data = &net2big_v2_leds_data, - }, -}; - -void __init netxbig_init(void) -{ - - if (of_machine_is_compatible("lacie,net5big_v2")) - netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data; - platform_device_register(&netxbig_v2_leds); -}
Since DT support is now available for the LEDs found on the LaCie netxbig boards (Kirkwood-based), then the old-fashion netxbig board setup file is no longer needed. This patch removes this file. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> --- arch/arm/mach-mvebu/Kconfig | 7 -- arch/arm/mach-mvebu/Makefile | 1 - arch/arm/mach-mvebu/board.h | 21 ----- arch/arm/mach-mvebu/kirkwood.c | 4 - arch/arm/mach-mvebu/netxbig.c | 191 ----------------------------------------- 5 files changed, 224 deletions(-) delete mode 100644 arch/arm/mach-mvebu/board.h delete mode 100644 arch/arm/mach-mvebu/netxbig.c