| Message ID | 1435742028-8237-4-git-send-email-acourbot@nvidia.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index ed8a8acd3d34..f0459ea94981 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -53,6 +53,14 @@ }; }; + gpu@0,57000000 { + /* + * Node left disabled on purpose - the bootloader will enable + * it after having set the VPR up + */ + vdd-supply = <&vdd_gpu>; + }; + pinmux: pinmux@0,70000868 { pinctrl-names = "boot"; pinctrl-0 = <&state_boot>; @@ -1514,7 +1522,7 @@ regulator-always-on; }; - sd6 { + vdd_gpu: sd6 { regulator-name = "+VDD_GPU_AP"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <1200000>;
Add the device-tree node for the GK20A GPU and leave it disabled. It is the responsability of the bootloader to enable it if the VPR registers have been programmed such as the GPU can operate. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> --- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)