| Message ID | 1438341127-7175-2-git-send-email-wens@csie.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, 2015-07-31 at 19:12 +0800, Chen-Yu Tsai wrote: > Enable sun6i DMA engine, sun6i P2WI, PWM, and crypto engine (Security > System) drivers by default. EXTCON is needed by the updated sun4i USB > PHY driver. > > While at it, enable FHANDLE, which is needed by systemd and newer > versions of udev. You might want to also add CONFIG_CGROUPS which is needed by systemd. > > And get rid of POWER_RESET, as the sun6i power reset driver has been > removed in favor of proper sun6i watchdog support. > > Signed-off-by: Chen-Yu Tsai <wens@csie.org> > --- > arch/arm/configs/sunxi_defconfig | 9 ++++++++- > 1 file changed, 8 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/configs/sunxi_defconfig > b/arch/arm/configs/sunxi_defconfig > index 7ebc346bf9fa..52cc0686524f 100644 > --- a/arch/arm/configs/sunxi_defconfig > +++ b/arch/arm/configs/sunxi_defconfig > @@ -1,3 +1,4 @@ > +CONFIG_FHANDLE=y > CONFIG_NO_HZ=y > CONFIG_HIGH_RES_TIMERS=y > CONFIG_BLK_DEV_INITRD=y > @@ -72,12 +73,12 @@ CONFIG_SERIAL_OF_PLATFORM=y > CONFIG_I2C=y > CONFIG_I2C_CHARDEV=y > CONFIG_I2C_MV64XXX=y > +CONFIG_I2C_SUN6I_P2WI=y > CONFIG_SPI=y > CONFIG_SPI_SUN4I=y > CONFIG_SPI_SUN6I=y > CONFIG_GPIO_SYSFS=y > CONFIG_POWER_SUPPLY=y > -CONFIG_POWER_RESET=y > CONFIG_THERMAL=y > CONFIG_CPU_THERMAL=y > CONFIG_WATCHDOG=y > @@ -109,7 +110,12 @@ CONFIG_RTC_CLASS=y > # CONFIG_RTC_INTF_PROC is not set > CONFIG_RTC_DRV_SUN6I=y > CONFIG_RTC_DRV_SUNXI=y > +CONFIG_DMADEVICES=y > +CONFIG_DMA_SUN6I=y > # CONFIG_IOMMU_SUPPORT is not set > +CONFIG_EXTCON=y > +CONFIG_PWM=y > +CONFIG_PWM_SUN4I=y > CONFIG_PHY_SUN4I_USB=y > CONFIG_PHY_SUN9I_USB=y > CONFIG_EXT4_FS=y > @@ -123,3 +129,4 @@ CONFIG_NLS_CODEPAGE_437=y > CONFIG_NLS_ISO8859_1=y > CONFIG_PRINTK_TIME=y > CONFIG_DEBUG_FS=y > +CONFIG_CRYPTO_DEV_SUN4I_SS=y > -- > 2.5.0 >
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 7ebc346bf9fa..52cc0686524f 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -1,3 +1,4 @@ +CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y @@ -72,12 +73,12 @@ CONFIG_SERIAL_OF_PLATFORM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MV64XXX=y +CONFIG_I2C_SUN6I_P2WI=y CONFIG_SPI=y CONFIG_SPI_SUN4I=y CONFIG_SPI_SUN6I=y CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY=y -CONFIG_POWER_RESET=y CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y CONFIG_WATCHDOG=y @@ -109,7 +110,12 @@ CONFIG_RTC_CLASS=y # CONFIG_RTC_INTF_PROC is not set CONFIG_RTC_DRV_SUN6I=y CONFIG_RTC_DRV_SUNXI=y +CONFIG_DMADEVICES=y +CONFIG_DMA_SUN6I=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXTCON=y +CONFIG_PWM=y +CONFIG_PWM_SUN4I=y CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_SUN9I_USB=y CONFIG_EXT4_FS=y @@ -123,3 +129,4 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_FS=y +CONFIG_CRYPTO_DEV_SUN4I_SS=y
Enable sun6i DMA engine, sun6i P2WI, PWM, and crypto engine (Security System) drivers by default. EXTCON is needed by the updated sun4i USB PHY driver. While at it, enable FHANDLE, which is needed by systemd and newer versions of udev. And get rid of POWER_RESET, as the sun6i power reset driver has been removed in favor of proper sun6i watchdog support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- arch/arm/configs/sunxi_defconfig | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)