new file mode 100644
@@ -0,0 +1,46 @@
+HiSilicon PCIe host bridge DT description
+
+HiSilicon PCIe host controller is based on Designware PCI core.
+It shares common functions with PCIe Designware core driver and inherits
+common properties defined in
+Documentation/devicetree/bindings/pci/designware-pci.txt.
+
+Additional properties are described here:
+
+Required properties:
+- compatible: Should contain "hisilicon,hip05-pcie".
+- reg: Should contain rc_dbi, subctrl, config registers location and length.
+- reg-names: Must include the following entries:
+ "rc_dbi": controller configuration registers;
+ "subctrl": whole PCIe hosts configuration registers;
+ "config": PCIe configuration space registers.
+- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts.
+- port-id: Should be 0, 1, 2 or 3.
+
+Optional properties:
+- status: Either "ok" or "disabled".
+- dma-coherent: Present if DMA operations are coherent.
+
+Example:
+ pcie@0xb0080000 {
+ compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
+ reg = <0 0xb0080000 0 0x10000>, <0 0xb0000000 0 0x10000>,
+ <0x220 0x00000000 0 0x2000>;
+ reg-names = "rc_dbi", "subctrl", "config";
+ bus-range = <0 15>;
+ msi-parent = <&its_pcie>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>;
+ num-lanes = <8>;
+ port-id = <1>;
+ #interrupts-cells = <1>;
+ interrupts-map-mask = <0xf800 0 0 7>;
+ interrupts-map = <0x0 0 0 1 &mbigen_pcie 1 10
+ 0x0 0 0 2 &mbigen_pcie 2 11
+ 0x0 0 0 3 &mbigen_pcie 3 12
+ 0x0 0 0 4 &mbigen_pcie 4 13>;
+ status = "ok";
+ };
This patch adds related DTS binding document for HiSilicon PCIe host driver. Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> --- .../devicetree/bindings/pci/hisilicon-pcie.txt | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt