[06/11] regulators: qcom-smd: Add PM8916 support

Commit Message

Andy Gross Sept. 8, 2015, 9:35 p.m. UTC

This patch adds support and documentation for the PM8916 regulators
found on MSM8916 platforms.

Signed-off-by: Andy Gross <[e-mail]>
---
 .../bindings/soc/qcom/qcom,smd-rpm-regulator.txt   |   18 ++++++
 drivers/regulator/qcom_smd-regulator.c             |   64 ++++++++++++++++++++
 2 files changed, 82 insertions(+)

Comments

Andy Gross Sept. 9, 2015, 6:59 p.m. UTC | #1

Disregard this one.  Dupe with different subject line of the other patch 6

Patch

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
index 7084474..5c867e9 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
@@ -18,6 +18,7 @@  Regulator nodes are identified by their compatible:
 	Definition: must be one of:
 		    "qcom,rpm-pm8841-regulators"
 		    "qcom,rpm-pm8941-regulators"
+		    "qcom,rpm-pm8916-regulators"
 
 - vdd_s1-supply:
 - vdd_s2-supply:
@@ -50,6 +51,19 @@  Regulator nodes are identified by their compatible:
 	Definition: reference to regulator supplying the input pin, as
 		    described in the data sheet
 
+- vdd_s1:
+- vdd_s2:
+- vdd_s3:
+- vdd_s4:
+- vdd_l1_l2_l3-supply
+- vdd_l4_l5_l6-supply
+- vdd_l7-supply
+- vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18:
+	Usage: optional (pm8916 only)
+	Value type: <phandle>
+	Definition: reference to regulator supplying the input pin, as
+		    described in the data sheet
+
 The regulator node houses sub-nodes for each regulator within the device. Each
 sub-node is identified using the node's name, with valid values listed for each
 of the pmics below.
@@ -62,6 +76,10 @@  pm8941:
 	l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
 	lvs3, 5vs1, 5vs2
 
+pm8916:
+	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
+	l14, l15, l16, l17, l18
+
 The content of each sub-node is defined by the standard binding for regulators -
 see regulator.txt.
 
diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 9c6167d..e92735f 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -211,6 +211,43 @@  static const struct regulator_desc pm8941_switch = {
 	.ops = &rpm_switch_ops,
 };
 
+static const struct regulator_desc pm8916_pldo = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(750000, 0, 208, 12500),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 209,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8916_nldo = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(375000, 0, 93, 12500),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 94,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8916_buck_lvo_smps = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500),
+		REGULATOR_LINEAR_RANGE(750000, 96, 127, 25000),
+	},
+	.n_linear_ranges = 2,
+	.n_voltages = 128,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8916_buck_hvo_smps = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(1550000, 0, 31, 25000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 32,
+	.ops = &rpm_smps_ldo_ops,
+};
+
 struct rpm_regulator_data {
 	const char *name;
 	u32 type;
@@ -272,9 +309,36 @@  static const struct rpm_regulator_data rpm_pm8941_regulators[] = {
 	{}
 };
 
+static const struct rpm_regulator_data rpm_pm8916_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8916_buck_lvo_smps, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8916_buck_lvo_smps, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pm8916_buck_lvo_smps, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pm8916_buck_hvo_smps, "vdd_s4" },
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pm8916_nldo, "vdd_l1_l2_l3" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pm8916_nldo, "vdd_l1_l2_l3" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pm8916_nldo, "vdd_l1_l2_l3" },
+	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pm8916_pldo, "vdd_l4_l5_l6" },
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pm8916_pldo, "vdd_l4_l5_l6" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pm8916_pldo, "vdd_l4_l5_l6" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pm8916_pldo, "vdd_l7" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+	{ "l14", QCOM_SMD_RPM_LDOA, 14, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+	{ "l15", QCOM_SMD_RPM_LDOA, 15, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+	{ "l16", QCOM_SMD_RPM_LDOA, 16, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+	{ "l17", QCOM_SMD_RPM_LDOA, 17, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+	{ "l18", QCOM_SMD_RPM_LDOA, 18, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"},
+	{}
+};
+
 static const struct of_device_id rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
 	{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
+	{ .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
 	{}
 };
 MODULE_DEVICE_TABLE(of, rpm_of_match);