| Message ID | 1442979683-9441-3-git-send-email-sugar.zhang@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Sep 23, 2015 at 11:41:23AM +0800, Sugar Zhang wrote: > rockchip,lrck-mode: 0: rxtx separate, 1: tx share, 2: rx share. > default use 'rxtx separate' mode. I'm slightly confused about this property - is this covering differences in the IP deployed on different SoCs or is it covering how the SoC is wired into the board? If it's for how the SoC is wired into the board (ie, Rx and Tx wired together) then this should already be covered by either the machine driver or the device at the other end of the link.
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt index 9b82c20..4066b85 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt @@ -21,6 +21,9 @@ Required properties: - clock-names: should contain followings: - "i2s_hclk": clock for I2S BUS - "i2s_clk" : clock for I2S controller +- rockchip,capture-channels: max capture channels, if not set, 2 channels default. +- rockchip,lrck-mode: select lrck use mode: 0: rxtx separate, 1: tx share, 2: rx share. + default use 'rxtx seprate' mode. Example for rk3288 I2S controller: @@ -34,4 +37,6 @@ i2s@ff890000 { dma-names = "tx", "rx"; clock-names = "i2s_hclk", "i2s_clk"; clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + rockchip,capture-channels = <2>; + rockchip,lrck-mode = <0>; };
rockchip,capture-channels: max capture channels, 2 channels default. rockchip,lrck-mode: 0: rxtx separate, 1: tx share, 2: rx share. default use 'rxtx separate' mode. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> --- Documentation/devicetree/bindings/sound/rockchip-i2s.txt | 5 +++++ 1 file changed, 5 insertions(+)