diff mbox

[2/2] ARM: socfpga: dts: enable USB and I2C on Arria10 SoCDK

Message ID 1443046275-26421-2-git-send-email-dinguyen@opensource.altera.com (mailing list archive)
State New, archived
Headers show

Commit Message

dinguyen@opensource.altera.com Sept. 23, 2015, 10:11 p.m. UTC 
From: Dinh Nguyen <dinguyen@opensource.altera.com>

On the Arria10 Devkit, the I2C bus has a serial EEPROM and an RTC
hanging off it. Also, enable the USB node.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
 arch/arm/boot/dts/socfpga_arria10_socdk.dtsi | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index 99aa9a1..567df98 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -70,6 +70,33 @@ 
 	status = "okay";
 };
 
+&i2c1 {
+	speed-mode = <0>;
+	status = "okay";
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	i2c-sda-falling-time-ns = <6000>;
+	i2c-scl-falling-time-ns = <6000>;
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
 &uart1 {
 	status = "okay";
 };
+
+&usb0 {
+	status = "okay";
+};