@@ -712,6 +712,8 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
armada-370-rd.dtb \
armada-370-seagate-nas-2bay.dtb \
armada-370-seagate-nas-4bay.dtb \
+ armada-370-seagate-personal-cloud.dtb \
+ armada-370-seagate-personal-cloud-2bay.dtb \
armada-370-synology-ds213j.dtb
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb
new file mode 100644
@@ -0,0 +1,51 @@
+/*
+ * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name : Seagate Personal Cloud 2-Bay
+ * Code name (board/PCB) : Cumulus Max
+ * Model name (case sticker) : SRN22C
+ * Material desc (product spec) : STCSxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-personal-cloud.dtsi"
+
+/ {
+ model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
+ compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
+
+ soc {
+ internal-regs {
+ sata@a0000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+ };
+ };
+
+ regulators {
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "SATA1 power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,37 @@
+/*
+ * Device Tree file for Seagate Personal Cloud NAS (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name : Seagate Personal Cloud
+ * Code name (board/PCB) : Cumulus
+ * Model name (case sticker) : SRN21C
+ * Material desc (product spec) : STCRxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-personal-cloud.dtsi"
+
+/ {
+ model = "Seagate Personal Cloud (Cumulus, SRN21C)";
+ compatible = "seagate,cumulus", "marvell,armada370", "marvell,armada-370-xp";
+
+ soc {
+ internal-regs {
+ sata@a0000 {
+ status = "okay";
+ nr-ports = <1>;
+ };
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,178 @@
+/*
+ * Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay
+ * (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * TODO: add support for the white SATA LED.
+ */
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ /* USB 3.0 Bridge ASM1042A */
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+ coherency-fabric@20200 {
+ broken-idle;
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ ethernet@74000 {
+ status = "okay";
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ pinctrl-names = "default";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+ spi@10600 {
+ status = "okay";
+ pinctrl-0 = <&spi0_pins2>;
+ pinctrl-names = "default";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* MX25L8006E */
+ compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <50000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ };
+ };
+ };
+
+ usb@50000 {
+ status = "okay";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ };
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "SATA0 power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ label = "Power button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+ debounce-interval = <100>;
+ };
+ button@2 {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ debounce-interval = <100>;
+ };
+ button@3 {
+ label = "USB VBUS error";
+ linux,code = <KEY_UNKNOWN>;
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ debounce-interval = <100>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ red-sata0 {
+ label = "cumulus:red:sata0";
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&pinctrl {
+ pinctrl-0 = <&sata_led_pin>;
+ pinctrl-names = "default";
+
+ sata_led_pin: sata-led-pin {
+ marvell,pins = "mpp60";
+ marvell,function = "sata0";
+ };
+ gpio_led_pin: gpio-led-pin {
+ marvell,pins = "mpp60";
+ marvell,function = "gpio";
+ };
+};