diff mbox

[v7,3/5] ARM: berlin: add a PWM node on the BG2Q

Message ID 1443797990-10809-4-git-send-email-antoine.tenart@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Antoine Tenart Oct. 2, 2015, 2:59 p.m. UTC 
This patch adds a PWM node in the Berlin BG2Q device tree, using the
newly added Berlin PWM driver.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
 arch/arm/boot/dts/berlin2q.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Sebastian Hesselbarth Oct. 5, 2015, 6:19 p.m. UTC | #1 
On 02.10.2015 16:59, Antoine Tenart wrote:
> This patch adds a PWM node in the Berlin BG2Q device tree, using the
> newly added Berlin PWM driver.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
> ---
>   arch/arm/boot/dts/berlin2q.dtsi | 7 +++++++
>   1 file changed, 7 insertions(+)

Applied this and the next two for BG2 and BG2CD
to berlin/dt.

Thanks,
   Sebastian

> diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
> index 63a48490e2f9..5bfa71a87617 100644
> --- a/arch/arm/boot/dts/berlin2q.dtsi
> +++ b/arch/arm/boot/dts/berlin2q.dtsi
> @@ -477,6 +477,13 @@
>   			status = "disabled";
>   		};
>
> +		pwm: pwm@f20000 {
> +			compatible = "marvell,berlin-pwm";
> +			reg = <0xf20000 0x40>;
> +			clocks = <&chip_clk CLKID_CFG>;
> +			#pwm-cells = <3>;
> +		};
> +
>   		apb@fc0000 {
>   			compatible = "simple-bus";
>   			#address-cells = <1>;
>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 63a48490e2f9..5bfa71a87617 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -477,6 +477,13 @@ 
 			status = "disabled";
 		};
 
+		pwm: pwm@f20000 {
+			compatible = "marvell,berlin-pwm";
+			reg = <0xf20000 0x40>;
+			clocks = <&chip_clk CLKID_CFG>;
+			#pwm-cells = <3>;
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;