@@ -68,6 +68,49 @@
};
};
+ thermal-zones {
+ cpu-thermal0 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ cpu_alert0: trip@0 {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit0: trip@1 {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 3>;
+
+ trips {
+ cpu_alert1: trip@0 {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit1: trip@1 {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -392,6 +435,29 @@
interrupt-controller;
#interrupt-cells = <4>;
};
+
+ qfprom: qfprom@5c000 {
+ compatible = "qcom,qfprom";
+ reg = <0x5c000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ tsens_caldata: caldata@d0 {
+ reg = <0xd0 0x8>;
+ };
+ tsens_calsel: calsel@ec {
+ reg = <0xec 0x4>;
+ };
+ };
+
+ tsens: thermal-sensor@4a8000 {
+ compatible = "qcom,msm8916-tsens";
+ reg = <0x4a8000 0x2000>;
+ nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+ nvmem-cell-names = "calib", "calib_sel";
+ qcom,tsens-slopes = <3200 3200 3200 3200 3200>;
+ qcom,sensor-id = <0 1 2 4 5>;
+ #thermal-sensor-cells = <1>;
+ };
};
};
Add thermal zones, tsens and qfprom nodes Cc: Andy Gross <agross@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 66 +++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+)