| Message ID | 1444684386-17094-20-git-send-email-laurent.pinchart@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index 2df63bee6f4e..026a17e05dc9 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -246,7 +246,7 @@ regulator-name = "vddio-sd0"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio3 29 0>; + gpio = <&gpio3 29 GPIO_ACTIVE_LOW>; }; reg_vddio_sd1: regulator@2 { @@ -255,7 +255,7 @@ regulator-name = "vddio-sd1"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio2 19 0>; + gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; }; reg_usb1_vbus: regulator@3 {
The enable GPIO is active low, but is flagged as active high in the gpio property. As the gpio property flags are currently unused by the driver this doesn't cause any issue for now, but will break later if the driver starts making use of the flags. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- arch/arm/boot/dts/imx28-m28cu3.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de>