Message ID | 1444927873-15140-4-git-send-email-javier@osg.samsung.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 15 October 2015 at 18:51, Javier Martinez Canillas <javier@osg.samsung.com> wrote: > The Exynos5250 Snow Chromebooks have a Marvell WiFi SDIO chip which > can't neither be removed nor be detected. But the node isn't marked > as non-removable and instead has the broken-cd DT property. > > This causes the device to be removed when the system enters into a > suspend state and the following warnings is shown after a resume: > > [ 181.944636] mmc2: error -2 during resume (card was removed?) > > Also remove the card-detect-delay property that is not needed with > non-removable. > > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Thanks, Tomeu > > Changes since v1: > - Remove card-detect-delay property as well. > - Use the correct mmc node. Suggested by Tomeu. > > arch/arm/boot/dts/exynos5250-snow-common.dtsi | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi > index 0a7f408824d8..1822c502a25a 100644 > --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi > +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi > @@ -552,10 +552,9 @@ > &mmc_3 { > status = "okay"; > num-slots = <1>; > - broken-cd; > + non-removable; > cap-sdio-irq; > keep-power-in-suspend; > - card-detect-delay = <200>; > samsung,dw-mshc-ciu-div = <3>; > samsung,dw-mshc-sdr-timing = <2 3>; > samsung,dw-mshc-ddr-timing = <1 2>; > -- > 2.4.3 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/
On 16.10.2015 01:51, Javier Martinez Canillas wrote: > The Exynos5250 Snow Chromebooks have a Marvell WiFi SDIO chip which > can't neither be removed nor be detected. But the node isn't marked > as non-removable and instead has the broken-cd DT property. > > This causes the device to be removed when the system enters into a > suspend state and the following warnings is shown after a resume: > > [ 181.944636] mmc2: error -2 during resume (card was removed?) > > Also remove the card-detect-delay property that is not needed with > non-removable. > > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> > --- > > Changes since v1: > - Remove card-detect-delay property as well. > - Use the correct mmc node. Suggested by Tomeu. > > arch/arm/boot/dts/exynos5250-snow-common.dtsi | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Best regards, Krzysztof
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 0a7f408824d8..1822c502a25a 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -552,10 +552,9 @@ &mmc_3 { status = "okay"; num-slots = <1>; - broken-cd; + non-removable; cap-sdio-irq; keep-power-in-suspend; - card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>;
The Exynos5250 Snow Chromebooks have a Marvell WiFi SDIO chip which can't neither be removed nor be detected. But the node isn't marked as non-removable and instead has the broken-cd DT property. This causes the device to be removed when the system enters into a suspend state and the following warnings is shown after a resume: [ 181.944636] mmc2: error -2 during resume (card was removed?) Also remove the card-detect-delay property that is not needed with non-removable. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> --- Changes since v1: - Remove card-detect-delay property as well. - Use the correct mmc node. Suggested by Tomeu. arch/arm/boot/dts/exynos5250-snow-common.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)