diff mbox

[v2,4/6] ARM: dts: Remove broken-cd from eMMC node in exynos5800-peach-pi

Message ID 1444927873-15140-5-git-send-email-javier@osg.samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Javier Martinez Canillas Oct. 15, 2015, 4:51 p.m. UTC
The eMMC is non-removable so is marked with the non-removable DT
property to avoid having to redetect it after a suspend/resume.

But it also has the broken-cd property which is wrong since only
one of the DT properties for card detection should be used.

Also remove the card-detect-delay property that is not needed with
non-removable.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

Changes since v1:
- None, new patch.

 arch/arm/boot/dts/exynos5800-peach-pi.dts | 2 --
 1 file changed, 2 deletions(-)

Comments

Krzysztof Kozlowski Oct. 19, 2015, 12:11 a.m. UTC | #1
On 16.10.2015 01:51, Javier Martinez Canillas wrote:
> The eMMC is non-removable so is marked with the non-removable DT
> property to avoid having to redetect it after a suspend/resume.
> 
> But it also has the broken-cd property which is wrong since only
> one of the DT properties for card detection should be used.
> 
> Also remove the card-detect-delay property that is not needed with
> non-removable.
> 
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> 
> Changes since v1:
> - None, new patch.
> 
>  arch/arm/boot/dts/exynos5800-peach-pi.dts | 2 --
>  1 file changed, 2 deletions(-)
> 

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index ca3a467a585d..7b018e451880 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -652,12 +652,10 @@ 
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
-	broken-cd;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	cap-mmc-highspeed;
 	non-removable;
-	card-detect-delay = <200>;
 	clock-frequency = <800000000>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;