@@ -12,8 +12,6 @@ Required properties:
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: should contain the I2S interrupt.
-- #address-cells: should be 1.
-- #size-cells: should be 0.
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt
- dma-names: should include "tx" and "rx".
@@ -28,8 +26,6 @@ i2s@ff890000 {
compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
reg = <0xff890000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
dmas = <&pdma1 0>, <&pdma1 1>;
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
@@ -12,8 +12,6 @@ Required properties:
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: should contain the SPDIF interrupt.
-- #address-cells: should be 1.
-- #size-cells: should be 0.
- dmas: DMA specifiers for tx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt
- dma-names: should be "tx"
@@ -33,8 +31,6 @@ spdif: spdif@0x1011e000 {
compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
reg = <0x1011e000 0x2000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
dmas = <&dmac1_s 8>;
dma-names = "tx";
clock-names = "hclk", "mclk";
Neither the rockchip i2s nor the rockchip spdif binding support child devices so #address-cells and #size-cells properties aren't required. Remove these from the bindings. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> --- This patch is on top of the ASoC tree Documentation/devicetree/bindings/sound/rockchip-i2s.txt | 4 ---- Documentation/devicetree/bindings/sound/rockchip-spdif.txt | 4 ---- 2 files changed, 8 deletions(-)