diff mbox

[v7,10/17] phy: Add driver for rockchip Display Port PHY

Message ID 1445655964-15237-5-git-send-email-ykk@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Yakir Yang Oct. 24, 2015, 3:06 a.m. UTC 
Add phy driver for the Rockchip DisplayPort PHY module. This
is required to get DisplayPort working in Rockchip SoCs.

Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v7: None
Changes in v6:
- Simply the commit message. (Kishon)
- Symmetrical enable/disbale the phy clock and power. (Kishon)

Changes in v5:
- Remove "reg" DT property, cause driver could poweron/poweroff phy via
  the exist "grf" syscon already. And rename the example DT node from
  "edp_phy: phy@ff770274" to "edp_phy: edp-phy" directly. (Heiko)
- Add deivce_node at the front of driver, update phy_ops type from "static
  struct" to "static const struct". And correct the input paramters of
  devm_phy_create() interfaces. (Heiko)

Changes in v4:
- Add commit message, and remove the redundant rockchip_dp_phy_init()
  function, move those code to probe() method. And remove driver .owner
  number. (Kishon)

Changes in v3:
- Suggest, add rockchip dp phy driver, collect the phy clocks and
  power control. (Heiko)

Changes in v2: None

 drivers/phy/Kconfig           |   7 ++
 drivers/phy/Makefile          |   1 +
 drivers/phy/phy-rockchip-dp.c | 153 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 161 insertions(+)
 create mode 100644 drivers/phy/phy-rockchip-dp.c

Comments

Heiko Stuebner Oct. 27, 2015, 9:23 p.m. UTC | #1 
Am Samstag, 24. Oktober 2015, 11:06:04 schrieb Yakir Yang:
> Add phy driver for the Rockchip DisplayPort PHY module. This
> is required to get DisplayPort working in Rockchip SoCs.
> 
> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> ---

> diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
> new file mode 100644
> index 0000000..4af19af
> --- /dev/null
> +++ b/drivers/phy/phy-rockchip-dp.c
> @@ -0,0 +1,153 @@
> +/*
> + * Rockchip DP PHY driver
> + *
> + * Copyright (C) 2015 FuZhou Rockchip Co., Ltd.
> + * Author: Yakir Yang <ykk@@rock-chips.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/clk.h>
> +#include <linux/phy/phy.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/platform_device.h>
> +
> +#define GRF_SOC_CON12                   0x0274
> +#define GRF_EDP_REF_CLK_SEL_INTER	BIT(4)
> +#define GRF_EDP_PHY_SIDDQ_WRITE_EN      BIT(21)
> +#define GRF_EDP_PHY_SIDDQ_ON            0
> +#define GRF_EDP_PHY_SIDDQ_OFF           BIT(5)

mixed spacers (tabs and spaces), please use either tabs if you want to
align stuff or a single space.

Also you're mixing the handling here, for SIDDQ you're defining both the
actual bit as well as the write-enable bit, but for CLK_SEL_INTR you're
hard-coding the 16-bit shift down in the code.

You could also just use/copy the HIWORD_MASK macro we use for example
in the clock controller.


> +
> +struct rockchip_dp_phy {
> +	struct device  *dev;
> +	struct regmap  *grf;
> +	struct clk     *phy_24m;
> +};
> +
> +static int rockchip_set_phy_state(struct phy *phy, bool enable)
> +{
> +	struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
> +	int ret;
> +
> +	if (enable) {
> +		ret = regmap_write(dp->grf, GRF_SOC_CON12,
> +				   GRF_EDP_PHY_SIDDQ_WRITE_EN |
> +				   GRF_EDP_PHY_SIDDQ_ON);
> +		if (ret < 0) {
> +			dev_err(dp->dev, "Can't enable PHY power %d\n", ret);
> +			return ret;
> +		}
> +
> +		ret = clk_prepare_enable(dp->phy_24m);
> +

unnecessary empty line after clk_prepare_enable


with these things fixed,
Reviewed-by: Heiko Stuebner <heiko@sntech.de>


Cheers,
Heiko
Yakir Yang Oct. 28, 2015, 1:46 a.m. UTC | #2 
On 10/28/2015 05:23 AM, Heiko Stuebner wrote:
> Am Samstag, 24. Oktober 2015, 11:06:04 schrieb Yakir Yang:
>> Add phy driver for the Rockchip DisplayPort PHY module. This
>> is required to get DisplayPort working in Rockchip SoCs.
>>
>> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
>> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
>> ---
>> diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
>> new file mode 100644
>> index 0000000..4af19af
>> --- /dev/null
>> +++ b/drivers/phy/phy-rockchip-dp.c
>> @@ -0,0 +1,153 @@
>> +/*
>> + * Rockchip DP PHY driver
>> + *
>> + * Copyright (C) 2015 FuZhou Rockchip Co., Ltd.
>> + * Author: Yakir Yang <ykk@@rock-chips.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License.
>> + */
>> +
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/clk.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/regmap.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/platform_device.h>
>> +
>> +#define GRF_SOC_CON12                   0x0274
>> +#define GRF_EDP_REF_CLK_SEL_INTER	BIT(4)
>> +#define GRF_EDP_PHY_SIDDQ_WRITE_EN      BIT(21)
>> +#define GRF_EDP_PHY_SIDDQ_ON            0
>> +#define GRF_EDP_PHY_SIDDQ_OFF           BIT(5)
> mixed spacers (tabs and spaces), please use either tabs if you want to
> align stuff or a single space.
>
> Also you're mixing the handling here, for SIDDQ you're defining both the
> actual bit as well as the write-enable bit, but for CLK_SEL_INTR you're
> hard-coding the 16-bit shift down in the code.
>
> You could also just use/copy the HIWORD_MASK macro we use for example
> in the clock controller.

Great, thanks.

- Yakir

>
>> +
>> +struct rockchip_dp_phy {
>> +	struct device  *dev;
>> +	struct regmap  *grf;
>> +	struct clk     *phy_24m;
>> +};
>> +
>> +static int rockchip_set_phy_state(struct phy *phy, bool enable)
>> +{
>> +	struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
>> +	int ret;
>> +
>> +	if (enable) {
>> +		ret = regmap_write(dp->grf, GRF_SOC_CON12,
>> +				   GRF_EDP_PHY_SIDDQ_WRITE_EN |
>> +				   GRF_EDP_PHY_SIDDQ_ON);
>> +		if (ret < 0) {
>> +			dev_err(dp->dev, "Can't enable PHY power %d\n", ret);
>> +			return ret;
>> +		}
>> +
>> +		ret = clk_prepare_enable(dp->phy_24m);
>> +
> unnecessary empty line after clk_prepare_enable
>
>
> with these things fixed,
> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
>
>
> Cheers,
> Heiko
>
>
>
Yakir Yang Oct. 28, 2015, 1:49 a.m. UTC | #3 
On 10/28/2015 05:23 AM, Heiko Stuebner wrote:
> Am Samstag, 24. Oktober 2015, 11:06:04 schrieb Yakir Yang:
>> Add phy driver for the Rockchip DisplayPort PHY module. This
>> is required to get DisplayPort working in Rockchip SoCs.
>>
>> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
>> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
>> ---
>> diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
>> new file mode 100644
>> index 0000000..4af19af
>> --- /dev/null
>> +++ b/drivers/phy/phy-rockchip-dp.c
>> @@ -0,0 +1,153 @@
>> +/*
>> + * Rockchip DP PHY driver
>> + *
>> + * Copyright (C) 2015 FuZhou Rockchip Co., Ltd.
>> + * Author: Yakir Yang <ykk@@rock-chips.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License.
>> + */
>> +
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/clk.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/regmap.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/platform_device.h>
>> +
>> +#define GRF_SOC_CON12                   0x0274
>> +#define GRF_EDP_REF_CLK_SEL_INTER	BIT(4)
>> +#define GRF_EDP_PHY_SIDDQ_WRITE_EN      BIT(21)
>> +#define GRF_EDP_PHY_SIDDQ_ON            0
>> +#define GRF_EDP_PHY_SIDDQ_OFF           BIT(5)
> mixed spacers (tabs and spaces), please use either tabs if you want to
> align stuff or a single space.
>
> Also you're mixing the handling here, for SIDDQ you're defining both the
> actual bit as well as the write-enable bit, but for CLK_SEL_INTR you're
> hard-coding the 16-bit shift down in the code.
>
> You could also just use/copy the HIWORD_MASK macro we use for example
> in the clock controller.
>
>
>> +
>> +struct rockchip_dp_phy {
>> +	struct device  *dev;
>> +	struct regmap  *grf;
>> +	struct clk     *phy_24m;
>> +};
>> +
>> +static int rockchip_set_phy_state(struct phy *phy, bool enable)
>> +{
>> +	struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
>> +	int ret;
>> +
>> +	if (enable) {
>> +		ret = regmap_write(dp->grf, GRF_SOC_CON12,
>> +				   GRF_EDP_PHY_SIDDQ_WRITE_EN |
>> +				   GRF_EDP_PHY_SIDDQ_ON);
>> +		if (ret < 0) {
>> +			dev_err(dp->dev, "Can't enable PHY power %d\n", ret);
>> +			return ret;
>> +		}
>> +
>> +		ret = clk_prepare_enable(dp->phy_24m);
>> +
> unnecessary empty line after clk_prepare_enable
>
>
> with these things fixed,
> Reviewed-by: Heiko Stuebner <heiko@sntech.de>

Oops, thanks

- Yakir

>
> Cheers,
> Heiko
>
>
>
diff mbox

Patch

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 7eb5859d..7355819 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -319,6 +319,13 @@  config PHY_ROCKCHIP_USB
 	help
 	  Enable this to support the Rockchip USB 2.0 PHY.
 
+config PHY_ROCKCHIP_DP
+	tristate "Rockchip Display Port PHY Driver"
+	depends on ARCH_ROCKCHIP && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the Rockchip Display Port PHY.
+
 config PHY_ST_SPEAR1310_MIPHY
 	tristate "ST SPEAR1310-MIPHY driver"
 	select GENERIC_PHY
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 075db1a..b1700cd 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -35,6 +35,7 @@  phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)	+= phy-s5pv210-usb2.o
 obj-$(CONFIG_PHY_EXYNOS5_USBDRD)	+= phy-exynos5-usbdrd.o
 obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
 obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
+obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
 obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
 obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
new file mode 100644
index 0000000..4af19af
--- /dev/null
+++ b/drivers/phy/phy-rockchip-dp.c
@@ -0,0 +1,153 @@ 
+/*
+ * Rockchip DP PHY driver
+ *
+ * Copyright (C) 2015 FuZhou Rockchip Co., Ltd.
+ * Author: Yakir Yang <ykk@@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+
+#define GRF_SOC_CON12                   0x0274
+#define GRF_EDP_REF_CLK_SEL_INTER	BIT(4)
+#define GRF_EDP_PHY_SIDDQ_WRITE_EN      BIT(21)
+#define GRF_EDP_PHY_SIDDQ_ON            0
+#define GRF_EDP_PHY_SIDDQ_OFF           BIT(5)
+
+struct rockchip_dp_phy {
+	struct device  *dev;
+	struct regmap  *grf;
+	struct clk     *phy_24m;
+};
+
+static int rockchip_set_phy_state(struct phy *phy, bool enable)
+{
+	struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
+	int ret;
+
+	if (enable) {
+		ret = regmap_write(dp->grf, GRF_SOC_CON12,
+				   GRF_EDP_PHY_SIDDQ_WRITE_EN |
+				   GRF_EDP_PHY_SIDDQ_ON);
+		if (ret < 0) {
+			dev_err(dp->dev, "Can't enable PHY power %d\n", ret);
+			return ret;
+		}
+
+		ret = clk_prepare_enable(dp->phy_24m);
+
+	} else {
+		clk_disable_unprepare(dp->phy_24m);
+
+		ret = regmap_write(dp->grf, GRF_SOC_CON12,
+				   GRF_EDP_PHY_SIDDQ_WRITE_EN |
+				   GRF_EDP_PHY_SIDDQ_OFF);
+	}
+
+	return ret;
+}
+
+static int rockchip_dp_phy_power_on(struct phy *phy)
+{
+	return rockchip_set_phy_state(phy, true);
+}
+
+static int rockchip_dp_phy_power_off(struct phy *phy)
+{
+	return rockchip_set_phy_state(phy, false);
+}
+
+static const struct phy_ops rockchip_dp_phy_ops = {
+	.power_on	= rockchip_dp_phy_power_on,
+	.power_off	= rockchip_dp_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int rockchip_dp_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct phy_provider *phy_provider;
+	struct rockchip_dp_phy *dp;
+	struct resource *res;
+	struct phy *phy;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
+	if (IS_ERR(dp))
+		return -ENOMEM;
+
+	dp->dev = dev;
+
+	dp->phy_24m = devm_clk_get(dev, "24m");
+	if (IS_ERR(dp->phy_24m)) {
+		dev_err(dev, "cannot get clock 24m\n");
+		return PTR_ERR(dp->phy_24m);
+	}
+
+	ret = clk_set_rate(dp->phy_24m, 24000000);
+	if (ret < 0) {
+		dev_err(dp->dev, "cannot set clock phy_24m %d\n", ret);
+		return ret;
+	}
+
+	dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+	if (IS_ERR(dp->grf)) {
+		dev_err(dev, "rk3288-dp needs rockchip,grf property\n");
+		return PTR_ERR(dp->grf);
+	}
+
+	ret = regmap_write(dp->grf, GRF_SOC_CON12, GRF_EDP_REF_CLK_SEL_INTER |
+			   (GRF_EDP_REF_CLK_SEL_INTER << 16));
+	if (ret != 0) {
+		dev_err(dp->dev, "Could not config GRF edp ref clk: %d\n", ret);
+		return ret;
+	}
+
+	phy = devm_phy_create(dev, np, &rockchip_dp_phy_ops);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "failed to create phy\n");
+		return PTR_ERR(phy);
+	}
+	phy_set_drvdata(phy, dp);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_dp_phy_dt_ids[] = {
+	{ .compatible = "rockchip,rk3288-dp-phy" },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_dp_phy_dt_ids);
+
+static struct platform_driver rockchip_dp_phy_driver = {
+	.probe		= rockchip_dp_phy_probe,
+	.driver		= {
+		.name	= "rockchip-dp-phy",
+		.of_match_table = rockchip_dp_phy_dt_ids,
+	},
+};
+
+module_platform_driver(rockchip_dp_phy_driver);
+
+MODULE_AUTHOR("Yakir Yang <ykk@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip DP PHY driver");
+MODULE_LICENSE("GPL v2");