From patchwork Sun Oct 25 18:09:44 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bjorn Andersson X-Patchwork-Id: 7483961 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork1.web.kernel.org (Postfix) with ESMTP id BC0599F2F7 for ; Sun, 25 Oct 2015 18:12:10 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id AFEB32071C for ; Sun, 25 Oct 2015 18:12:09 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id A57C320720 for ; Sun, 25 Oct 2015 18:12:08 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZqPkI-0007zj-Jh; Sun, 25 Oct 2015 18:10:18 +0000 Received: from seldrel01.sonyericsson.com ([37.139.156.2]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZqPkE-0006h5-9g for linux-arm-kernel@lists.infradead.org; Sun, 25 Oct 2015 18:10:16 +0000 From: Bjorn Andersson To: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Johan Hovold , Kumar Gala Subject: [PATCH 1/3] devicetree: mfd: Add binding for the TI LM3533 Date: Sun, 25 Oct 2015 11:09:44 -0700 Message-ID: <1445796586-28683-1-git-send-email-bjorn.andersson@sonymobile.com> X-Mailer: git-send-email 2.4.2 MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20151025_111014_517906_0AE2F3A7 X-CRM114-Status: GOOD ( 13.39 ) X-Spam-Score: -4.2 (----) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Spam-Status: No, score=-4.2 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_MED, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Add the binding for the Texas Instruments LM3533 lighting power solution. Signed-off-by: Bjorn Andersson --- Documentation/devicetree/bindings/mfd/lm3533.txt | 183 +++++++++++++++++++++++ 1 file changed, 183 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/lm3533.txt diff --git a/Documentation/devicetree/bindings/mfd/lm3533.txt b/Documentation/devicetree/bindings/mfd/lm3533.txt new file mode 100644 index 000000000000..3cc41695a544 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/lm3533.txt @@ -0,0 +1,183 @@ +Texas Instruments LM3533 binding + +This binding describes the Texas Instruments LM3533, a lighting power solution +for smartphone handsets. The common properties are described directly in the +node, while each individual component are described in an optional subnode. + +- compatible: + Usage: required + Value type: + Definition: must be: + "ti,lm3533" + +- reg: + Usage: required + Value type: + Definition: i2c address of the LM3533 chip + +- ti,hwen-gpios: + Usage: required + Value type: + Definition: reference to gpio pin connected to the HWEN input; as + specified in "gpio/gpio.txt" + +- ti,als-supply: + Usage: optional + Value type: + Definition: reference to regulator powering the V_als input; as + specified in "regulator/regulator.txt" + +- ti,boost-freq: + Usage: required + Value type: + Definition: switch-frequency of the boost converter, must be either: + 500000 or 1000000 + +- ti,boost-ovp: + Usage: required + Value type: + Definition: over voltage protection limit, must be one of: 16, 24, 32 + or 40 + +- #address-cells: + Usage: required + Value type: + Definition: must be 1 + +- #size-cells: + Usage: required + Value type: + Definition: must be 0 + += ALS SUBNODE +The als subnode must be named "als", it carries the als related properties. + +- ti,als-resistance: + Usage: required (unless ti,pwm-mode is specified) + Value type: + Definition: specifies the resistor value (R_als), in Ohm. Valid values + ranges from 200kOhm to 1574Ohm. + +- ti,pwm-mode: + Usage: optional + Value type: + Definition: specifies, if present, that the als should operate in pwm + mode - rather than analog mode + += BACKLIGHT NODES +Backlight subnodes must be named "backlight", they carry the backlight related +properties. + +- reg: + Usage: required + Value type: + Definition: specifies which of the two backlights this node corresponds + to + +- default-brightness: + Usage: optional + Value type: <32> + Definition: specifies the default brightness for the backlight, in + units of brightness [0-255] + +- label: + Usage: required + Value type: + Definition: specifies a name of this backlight + +- led-max-microamp: + Usage: required + Value type: + Definition: specifies the max current for this backlight, in uA, as + described in "leds/common.txt" + +- ti,pwm-zones: + Usage: optional + Value type: + Definition: lists the ALS zones to be PWM controlled for this backlight, + the values in the list are in the range [0 - 4] + += LED NODES +LED subnodes must be named "led", they carry the LED related properties. + +- reg: + Usage: required + Value type: + Definition: specifies which of the four LEDs this node corresponds to + +- linux,default-trigger: + Usage: optional + Value type: + Definition: specifies the default trigger for the LED, as described in + "leds/common.txt" + +- label: + Usage: required + Value type: + Definition: specifies a name of this LED, as described in + "leds/common.txt" + +- led-max-microamp: + Usage: required + Value type: + Definition: specifies the max current for this LED, in uA, as described + in "leds/common.txt" + +- ti,pwm-zones: + Usage: optional + Value type: + Definition: lists the ALS zones to be PWM controlled for this LED, the + values in the list are in the range [0 - 4] + += EXAMPLE + +i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + ... + + lm3533@36 { + compatible = "ti,lm3533"; + reg = <0x36>; + + ti,hwen-gpios = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>; + ti,als-supply = <&pm8921_l11>; + + ti,boost-freq = <500000>; + ti,boost-ovp = <24>; + + #address-cells = <1>; + #size-cells = <0>; + + als { + ti,als-resistance = <200000>; + }; + + backlight@0 { + reg = <0>; + label = "backlight"; + + led-max-microamp = <20200>; + }; + + led@0 { + reg = <0>; + label = "red"; + + led-max-microamp = <5000>; + }; + + led@1 { + reg = <1>; + label = "green"; + + led-max-microamp = <5000>; + }; + + led@2 { + reg = <2>; + label = "blue"; + + led-max-microamp = <5000>; + }; + }; +