| Message ID | 1445969338-23977-1-git-send-email-stefan.wahren@i2se.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Am 27.10.2015 um 19:08 schrieb Stefan Wahren: > Rebuild bcm2835_defconfig using "make bcm2835_defconfig; > make savedefconfig", and enable manually the following features: > > * all bcm2835-relevant drivers (MBOX, WDT, DMA, PWM, SND) > * enable regular stackprotector because CONFIG_CC_STACKPROTECTOR > disappear > * enable some new dependencies in order to keep LED heartbeat > ( CONFIG_NEW_LEDS, CONFIG_LEDS_CLASS, CONFIG_LEDS_TRIGGERS ) > > The following options were removed, because they are enabled implicit: > > CONFIG_RD_BZIP2, CONFIG_RD_LZMA, CONFIG_RD_XZ, CONFIG_RD_LZO, > CONFIG_USB_DWC2_HOST, CONFIG_EXT4_FS, CONFIG_EXT4_FS_POSIX_ACL > > These options became obsolete: > > CONFIG_RESOURCE_COUNTERS, CONFIG_SCSI_MULTI_LUN > > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Any objections about this? Regards Stefan
On 10/27/2015 12:08 PM, Stefan Wahren wrote: > Rebuild bcm2835_defconfig using "make bcm2835_defconfig; > make savedefconfig", and enable manually the following features: > > * all bcm2835-relevant drivers (MBOX, WDT, DMA, PWM, SND) > * enable regular stackprotector because CONFIG_CC_STACKPROTECTOR > disappear > * enable some new dependencies in order to keep LED heartbeat > ( CONFIG_NEW_LEDS, CONFIG_LEDS_CLASS, CONFIG_LEDS_TRIGGERS ) > > The following options were removed, because they are enabled implicit: > > CONFIG_RD_BZIP2, CONFIG_RD_LZMA, CONFIG_RD_XZ, CONFIG_RD_LZO, > CONFIG_USB_DWC2_HOST, CONFIG_EXT4_FS, CONFIG_EXT4_FS_POSIX_ACL > > These options became obsolete: > > CONFIG_RESOURCE_COUNTERS, CONFIG_SCSI_MULTI_LUN This all sounds plausible, although I haven't had time to test. Perhaps some other RPi maintainer can. Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Stefan Wahren <info@lategoodbye.de> writes: > Am 27.10.2015 um 19:08 schrieb Stefan Wahren: >> Rebuild bcm2835_defconfig using "make bcm2835_defconfig; >> make savedefconfig", and enable manually the following features: >> >> * all bcm2835-relevant drivers (MBOX, WDT, DMA, PWM, SND) >> * enable regular stackprotector because CONFIG_CC_STACKPROTECTOR >> disappear >> * enable some new dependencies in order to keep LED heartbeat >> ( CONFIG_NEW_LEDS, CONFIG_LEDS_CLASS, CONFIG_LEDS_TRIGGERS ) >> >> The following options were removed, because they are enabled implicit: >> >> CONFIG_RD_BZIP2, CONFIG_RD_LZMA, CONFIG_RD_XZ, CONFIG_RD_LZO, >> CONFIG_USB_DWC2_HOST, CONFIG_EXT4_FS, CONFIG_EXT4_FS_POSIX_ACL >> >> These options became obsolete: >> >> CONFIG_RESOURCE_COUNTERS, CONFIG_SCSI_MULTI_LUN >> >> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> > > Any objections about this? Sorry for the delay. I've pulled this for 4.5 (bcm2835-defconfig-next branch).
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 31cb073..0fda844 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -10,7 +10,6 @@ CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y CONFIG_CGROUP_CPUACCT=y -CONFIG_RESOURCE_COUNTERS=y CONFIG_CGROUP_PERF=y CONFIG_CFS_BANDWIDTH=y CONFIG_RT_GROUP_SCHED=y @@ -18,10 +17,6 @@ CONFIG_NAMESPACES=y CONFIG_SCHED_AUTOGROUP=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -CONFIG_RD_XZ=y -CONFIG_RD_LZO=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y @@ -29,6 +24,7 @@ CONFIG_EMBEDDED=y CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_JUMP_LABEL=y +CONFIG_CC_STACKPROTECTOR_REGULAR=y CONFIG_ARCH_MULTI_V6=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_BCM=y @@ -38,7 +34,6 @@ CONFIG_AEABI=y CONFIG_KSM=y CONFIG_CLEANCACHE=y CONFIG_SECCOMP=y -CONFIG_CC_STACKPROTECTOR=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y CONFIG_VFP=y @@ -57,7 +52,6 @@ CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_NETDEVICES=y @@ -77,17 +71,27 @@ CONFIG_SPI=y CONFIG_SPI_BCM2835=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_BCM2835_WDT=y CONFIG_FB=y CONFIG_FB_SIMPLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_BCM2835_SOC_I2S=y CONFIG_USB=y CONFIG_USB_STORAGE=y +CONFIG_USB_DWC2=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_BCM2835=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_ONESHOT=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y @@ -96,17 +100,19 @@ CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_LEDS_TRIGGER_TRANSIENT=y CONFIG_LEDS_TRIGGER_CAMERA=y +CONFIG_DMADEVICES=y +CONFIG_DMA_BCM2835=y CONFIG_STAGING=y -CONFIG_USB_DWC2=y -CONFIG_USB_DWC2_HOST=y +CONFIG_MAILBOX=y +CONFIG_BCM2835_MBOX=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_PWM=y +CONFIG_PWM_BCM2835=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_FANOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y
Rebuild bcm2835_defconfig using "make bcm2835_defconfig; make savedefconfig", and enable manually the following features: * all bcm2835-relevant drivers (MBOX, WDT, DMA, PWM, SND) * enable regular stackprotector because CONFIG_CC_STACKPROTECTOR disappear * enable some new dependencies in order to keep LED heartbeat ( CONFIG_NEW_LEDS, CONFIG_LEDS_CLASS, CONFIG_LEDS_TRIGGERS ) The following options were removed, because they are enabled implicit: CONFIG_RD_BZIP2, CONFIG_RD_LZMA, CONFIG_RD_XZ, CONFIG_RD_LZO, CONFIG_USB_DWC2_HOST, CONFIG_EXT4_FS, CONFIG_EXT4_FS_POSIX_ACL These options became obsolete: CONFIG_RESOURCE_COUNTERS, CONFIG_SCSI_MULTI_LUN Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> --- arch/arm/configs/bcm2835_defconfig | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) This patch is only compile-tested. Changes in V3: add explanation about removed options Changes in V2: clarify patch description