@@ -512,6 +512,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
dtb-$(CONFIG_ARCH_REALVIEW) += \
arm-realview-pb1176.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+ rk3036-evb.dtb \
rk3066a-bqcurie2.dtb \
rk3066a-marsboard.dtb \
rk3066a-rayeager.dtb \
new file mode 100644
@@ -0,0 +1,64 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3036.dtsi"
+
+/ {
+ model = "Rockchip RK3036 Evaluation board";
+ compatible = "rockchip,rk3036-evb", "rockchip,rk3036";
+};
+
+&i2c1 {
+ status = "okay";
+
+ hym8563: hym8563@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
new file mode 100644
@@ -0,0 +1,547 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3036-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "rockchip,rk3036";
+
+ interrupt-parent = <&gic>;
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ mshc0 = &emmc;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x60000000 0x40000000>;
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@f00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf00>;
+ operating-points = <
+ /* KHz uV */
+ 816000 1000000
+ >;
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
+ resets = <&cru SRST_CORE0>;
+ };
+ cpu1: cpu@f01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf01>;
+ resets = <&cru SRST_CORE1>;
+ };
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pdma: pdma@20078000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x20078000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC2>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ xin24m: oscillator {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ arm,cpu-registers-not-fw-configured;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clock-frequency = <24000000>;
+ };
+
+ timer: timer@20044000 {
+ compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
+ reg = <0x20044000 0x20>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xin24m>, <&cru PCLK_TIMER>;
+ clock-names = "timer", "pclk";
+ };
+
+ gic: interrupt-controller@10139000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+
+ reg = <0x10139000 0x1000>,
+ <0x1013a000 0x1000>,
+ <0x1013c000 0x2000>,
+ <0x1013e000 0x2000>;
+ interrupts = <GIC_PPI 9 0xf04>;
+ };
+
+ bus_intmem@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x10080000 0x2000>;
+ };
+
+ cru: clock-controller@20000000 {
+ compatible = "rockchip,rk3036-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ assigned-clocks = <&cru PLL_GPLL>;
+ assigned-clock-rates = <594000000>;
+ };
+
+ grf: syscon@20008000 {
+ compatible = "rockchip,rk3036-grf", "syscon";
+ reg = <0x20008000 0x1000>;
+ };
+
+ pwm0: pwm@20050000 {
+ compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+ reg = <0x20050000 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm1: pwm@20050010 {
+ compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+ reg = <0x20050010 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm2: pwm@20050020 {
+ compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+ reg = <0x20050020 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm3: pwm@20050030 {
+ compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+ reg = <0x20050030 0x10>;
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ acodec: acodec-ana@20030000 {
+ compatible = "rk3036-codec";
+ reg = <0x20030000 0x4000>;
+ rockchip,grf = <&grf>;
+ clock-names = "acodec_pclk";
+ clocks = <&cru PCLK_ACODEC>;
+ status = "disabled";
+ };
+
+ emmc: dwmmc@1021c000 {
+ compatible = "rockchip,rk3288-dw-mshc";
+ clock-frequency = <37500000>;
+ clock-freq-min-max = <400000 37500000>;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ dmas = <&pdma 12>;
+ dma-names = "rx-tx";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x1021c000 0x4000>;
+ broken-cd;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ disable-wp;
+ non-removable;
+ num-slots = <1>;
+ default-sample-phase = <158>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@20072000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0x20072000 0x1000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@20056000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0x20056000 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@2005a000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0x2005a000 0x1000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_xfer>;
+ status = "disabled";
+ };
+
+ i2s: i2s@10220000 {
+ compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
+ reg = <0x10220000 0x4000>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&pdma 0>, <&pdma 1>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_hclk", "i2s_clk";
+ clocks = <&cru HCLK_I2S>, <&cru SCLK_I2S>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_bus>;
+ status = "disabled";
+ };
+
+ uart0: serial@20060000 {
+ compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+ reg = <0x20060000 0x100>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "disabled";
+ };
+
+ uart1: serial@20064000 {
+ compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+ reg = <0x20064000 0x100>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+ status = "disabled";
+ };
+
+ uart2: serial@20068000 {
+ compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+ reg = <0x20068000 0x100>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+ status = "disabled";
+ };
+
+ usb_otg: usb@10180000 {
+ compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x10180000 0x40000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG0>;
+ clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <275>;
+ g-tx-fifo-size = <256 128 128 64 64 32>;
+ g-use-dma;
+ status = "disabled";
+ };
+
+ usb_host: usb@101c0000 {
+ compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x101c0000 0x40000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG1>;
+ clock-names = "otg";
+ dr_mode = "host";
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3036-pinctrl";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio0@2007c000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2007c000 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1@20080000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20080000 0x100>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2@20084000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20084000 0x100>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins = <0 1 2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_pin: pwm3-pin {
+ rockchip,pins = <0 27 1 &pcfg_pull_none>;
+ };
+ };
+
+ emmc {
+ /*
+ * We run eMMC at max speed; bump up drive strength.
+ * We also have external pulls, so disable the internal ones.
+ */
+ emmc_clk: emmc-clk {
+ rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
+ <1 25 RK_FUNC_2 &pcfg_pull_none>,
+ <1 26 RK_FUNC_2 &pcfg_pull_none>,
+ <1 27 RK_FUNC_2 &pcfg_pull_none>,
+ <1 28 RK_FUNC_2 &pcfg_pull_none>,
+ <1 29 RK_FUNC_2 &pcfg_pull_none>,
+ <1 30 RK_FUNC_2 &pcfg_pull_none>,
+ <1 31 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
+ <0 1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+ <0 3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c2 {
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>,
+ <2 21 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2s {
+ i2s_bus: i2s-bus {
+ rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_none>,
+ <1 1 RK_FUNC_1 &pcfg_pull_none>,
+ <1 2 RK_FUNC_1 &pcfg_pull_none>,
+ <1 3 RK_FUNC_1 &pcfg_pull_none>,
+ <1 4 RK_FUNC_1 &pcfg_pull_none>,
+ <1 5 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_up>,
+ <0 17 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>,
+ <2 23 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ /* no rts / cts for uart1 */
+ };
+
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
+ <1 19 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ /* no rts / cts for uart2 */
+ };
+ };
+};