From patchwork Sun Nov 8 04:52:57 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sinan Kaya X-Patchwork-Id: 7576721 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 1B8DCC05C6 for ; Sun, 8 Nov 2015 04:57:01 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id B8F1C2060F for ; Sun, 8 Nov 2015 04:56:56 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 76D932060E for ; Sun, 8 Nov 2015 04:56:52 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZvHzq-0001tg-8Q; Sun, 08 Nov 2015 04:54:30 +0000 Received: from smtp.codeaurora.org ([198.145.29.96]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZvHzh-0001ol-Q9 for linux-arm-kernel@lists.infradead.org; Sun, 08 Nov 2015 04:54:27 +0000 Received: from smtp.codeaurora.org (localhost [127.0.0.1]) by smtp.codeaurora.org (Postfix) with ESMTP id 5AB0513F228; Sun, 8 Nov 2015 04:54:01 +0000 (UTC) Received: by smtp.codeaurora.org (Postfix, from userid 486) id 4709913F279; Sun, 8 Nov 2015 04:54:01 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Spam-Level: X-Spam-Status: No, score=-4.2 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_MED, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 Received: from drakthul.qualcomm.com (rrcs-67-52-130-30.west.biz.rr.com [67.52.130.30]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) (Authenticated sender: okaya@smtp.codeaurora.org) by smtp.codeaurora.org (Postfix) with ESMTPSA id 848AE13F228; Sun, 8 Nov 2015 04:53:55 +0000 (UTC) From: Sinan Kaya To: dmaengine@vger.kernel.org, timur@codeaurora.org, cov@codeaurora.org, jcm@redhat.com Subject: [PATCH V3 1/4] dma: qcom_bam_dma: move to qcom directory Date: Sat, 7 Nov 2015 23:52:57 -0500 Message-Id: <1446958380-23298-2-git-send-email-okaya@codeaurora.org> X-Mailer: git-send-email 1.8.2.1 In-Reply-To: <1446958380-23298-1-git-send-email-okaya@codeaurora.org> References: <1446958380-23298-1-git-send-email-okaya@codeaurora.org> X-Virus-Scanned: ClamAV using ClamSMTP X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20151107_205422_018450_FDC7D504 X-CRM114-Status: GOOD ( 22.76 ) X-Spam-Score: -2.6 (--) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Stanimir Varbanov , Archit Taneja , Pramod Gurav , Vinod Koul , linux-arm-msm@vger.kernel.org, Kumar Gala , linux-kernel@vger.kernel.org, Sinan Kaya , agross@codeaurora.org, Dan Williams , Maxime Ripard , linux-arm-kernel@lists.infradead.org MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP Creating a QCOM directory for all QCOM DMA source files. Signed-off-by: Sinan Kaya --- drivers/dma/Kconfig | 13 +- drivers/dma/Makefile | 2 +- drivers/dma/qcom/Kconfig | 9 + drivers/dma/qcom/Makefile | 1 + drivers/dma/qcom/bam_dma.c | 1259 ++++++++++++++++++++++++++++++++++++++++++++ drivers/dma/qcom_bam_dma.c | 1259 -------------------------------------------- 6 files changed, 1273 insertions(+), 1270 deletions(-) create mode 100644 drivers/dma/qcom/Kconfig create mode 100644 drivers/dma/qcom/Makefile create mode 100644 drivers/dma/qcom/bam_dma.c delete mode 100644 drivers/dma/qcom_bam_dma.c diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index b458475..d17d9ec 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -320,7 +320,7 @@ config MOXART_DMA select DMA_VIRTUAL_CHANNELS help Enable support for the MOXA ART SoC DMA controller. - + Say Y here if you enabled MMP ADMA, otherwise say N. config MPC512X_DMA @@ -408,15 +408,6 @@ config PXA_DMA 16 to 32 channels for peripheral to memory or memory to memory transfers. -config QCOM_BAM_DMA - tristate "QCOM BAM DMA support" - depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM) - select DMA_ENGINE - select DMA_VIRTUAL_CHANNELS - ---help--- - Enable support for the QCOM BAM DMA controller. This controller - provides DMA capabilities for a variety of on-chip devices. - config SIRF_DMA tristate "CSR SiRFprimaII/SiRFmarco DMA support" depends on ARCH_SIRF @@ -527,6 +518,8 @@ config ZX_DMA # driver files source "drivers/dma/bestcomm/Kconfig" +source "drivers/dma/qcom/Kconfig" + source "drivers/dma/dw/Kconfig" source "drivers/dma/hsu/Kconfig" diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 7711a71..8dba90d 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -52,7 +52,6 @@ obj-$(CONFIG_PCH_DMA) += pch_dma.o obj-$(CONFIG_PL330_DMA) += pl330.o obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/ obj-$(CONFIG_PXA_DMA) += pxa_dma.o -obj-$(CONFIG_QCOM_BAM_DMA) += qcom_bam_dma.o obj-$(CONFIG_RENESAS_DMA) += sh/ obj-$(CONFIG_SIRF_DMA) += sirf-dma.o obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o @@ -66,4 +65,5 @@ obj-$(CONFIG_TI_EDMA) += edma.o obj-$(CONFIG_XGENE_DMA) += xgene-dma.o obj-$(CONFIG_ZX_DMA) += zx296702_dma.o +obj-y += qcom/ obj-y += xilinx/ diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig new file mode 100644 index 0000000..17545df --- /dev/null +++ b/drivers/dma/qcom/Kconfig @@ -0,0 +1,9 @@ +config QCOM_BAM_DMA + tristate "QCOM BAM DMA support" + depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM) + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + ---help--- + Enable support for the QCOM BAM DMA controller. This controller + provides DMA capabilities for a variety of on-chip devices. + diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile new file mode 100644 index 0000000..f612ae3 --- /dev/null +++ b/drivers/dma/qcom/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c new file mode 100644 index 0000000..5359234 --- /dev/null +++ b/drivers/dma/qcom/bam_dma.c @@ -0,0 +1,1259 @@ +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +/* + * QCOM BAM DMA engine driver + * + * QCOM BAM DMA blocks are distributed amongst a number of the on-chip + * peripherals on the MSM 8x74. The configuration of the channels are dependent + * on the way they are hard wired to that specific peripheral. The peripheral + * device tree entries specify the configuration of each channel. + * + * The DMA controller requires the use of external memory for storage of the + * hardware descriptors for each channel. The descriptor FIFO is accessed as a + * circular buffer and operations are managed according to the offset within the + * FIFO. After pipe/channel reset, all of the pipe registers and internal state + * are back to defaults. + * + * During DMA operations, we write descriptors to the FIFO, being careful to + * handle wrapping and then write the last FIFO offset to that channel's + * P_EVNT_REG register to kick off the transaction. The P_SW_OFSTS register + * indicates the current FIFO offset that is being processed, so there is some + * indication of where the hardware is currently working. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../dmaengine.h" +#include "../virt-dma.h" + +struct bam_desc_hw { + u32 addr; /* Buffer physical address */ + u16 size; /* Buffer size in bytes */ + u16 flags; +}; + +#define DESC_FLAG_INT BIT(15) +#define DESC_FLAG_EOT BIT(14) +#define DESC_FLAG_EOB BIT(13) +#define DESC_FLAG_NWD BIT(12) + +struct bam_async_desc { + struct virt_dma_desc vd; + + u32 num_desc; + u32 xfer_len; + + /* transaction flags, EOT|EOB|NWD */ + u16 flags; + + struct bam_desc_hw *curr_desc; + + enum dma_transfer_direction dir; + size_t length; + struct bam_desc_hw desc[0]; +}; + +enum bam_reg { + BAM_CTRL, + BAM_REVISION, + BAM_NUM_PIPES, + BAM_DESC_CNT_TRSHLD, + BAM_IRQ_SRCS, + BAM_IRQ_SRCS_MSK, + BAM_IRQ_SRCS_UNMASKED, + BAM_IRQ_STTS, + BAM_IRQ_CLR, + BAM_IRQ_EN, + BAM_CNFG_BITS, + BAM_IRQ_SRCS_EE, + BAM_IRQ_SRCS_MSK_EE, + BAM_P_CTRL, + BAM_P_RST, + BAM_P_HALT, + BAM_P_IRQ_STTS, + BAM_P_IRQ_CLR, + BAM_P_IRQ_EN, + BAM_P_EVNT_DEST_ADDR, + BAM_P_EVNT_REG, + BAM_P_SW_OFSTS, + BAM_P_DATA_FIFO_ADDR, + BAM_P_DESC_FIFO_ADDR, + BAM_P_EVNT_GEN_TRSHLD, + BAM_P_FIFO_SIZES, +}; + +struct reg_offset_data { + u32 base_offset; + unsigned int pipe_mult, evnt_mult, ee_mult; +}; + +static const struct reg_offset_data bam_v1_3_reg_info[] = { + [BAM_CTRL] = { 0x0F80, 0x00, 0x00, 0x00 }, + [BAM_REVISION] = { 0x0F84, 0x00, 0x00, 0x00 }, + [BAM_NUM_PIPES] = { 0x0FBC, 0x00, 0x00, 0x00 }, + [BAM_DESC_CNT_TRSHLD] = { 0x0F88, 0x00, 0x00, 0x00 }, + [BAM_IRQ_SRCS] = { 0x0F8C, 0x00, 0x00, 0x00 }, + [BAM_IRQ_SRCS_MSK] = { 0x0F90, 0x00, 0x00, 0x00 }, + [BAM_IRQ_SRCS_UNMASKED] = { 0x0FB0, 0x00, 0x00, 0x00 }, + [BAM_IRQ_STTS] = { 0x0F94, 0x00, 0x00, 0x00 }, + [BAM_IRQ_CLR] = { 0x0F98, 0x00, 0x00, 0x00 }, + [BAM_IRQ_EN] = { 0x0F9C, 0x00, 0x00, 0x00 }, + [BAM_CNFG_BITS] = { 0x0FFC, 0x00, 0x00, 0x00 }, + [BAM_IRQ_SRCS_EE] = { 0x1800, 0x00, 0x00, 0x80 }, + [BAM_IRQ_SRCS_MSK_EE] = { 0x1804, 0x00, 0x00, 0x80 }, + [BAM_P_CTRL] = { 0x0000, 0x80, 0x00, 0x00 }, + [BAM_P_RST] = { 0x0004, 0x80, 0x00, 0x00 }, + [BAM_P_HALT] = { 0x0008, 0x80, 0x00, 0x00 }, + [BAM_P_IRQ_STTS] = { 0x0010, 0x80, 0x00, 0x00 }, + [BAM_P_IRQ_CLR] = { 0x0014, 0x80, 0x00, 0x00 }, + [BAM_P_IRQ_EN] = { 0x0018, 0x80, 0x00, 0x00 }, + [BAM_P_EVNT_DEST_ADDR] = { 0x102C, 0x00, 0x40, 0x00 }, + [BAM_P_EVNT_REG] = { 0x1018, 0x00, 0x40, 0x00 }, + [BAM_P_SW_OFSTS] = { 0x1000, 0x00, 0x40, 0x00 }, + [BAM_P_DATA_FIFO_ADDR] = { 0x1024, 0x00, 0x40, 0x00 }, + [BAM_P_DESC_FIFO_ADDR] = { 0x101C, 0x00, 0x40, 0x00 }, + [BAM_P_EVNT_GEN_TRSHLD] = { 0x1028, 0x00, 0x40, 0x00 }, + [BAM_P_FIFO_SIZES] = { 0x1020, 0x00, 0x40, 0x00 }, +}; + +static const struct reg_offset_data bam_v1_4_reg_info[] = { + [BAM_CTRL] = { 0x0000, 0x00, 0x00, 0x00 }, + [BAM_REVISION] = { 0x0004, 0x00, 0x00, 0x00 }, + [BAM_NUM_PIPES] = { 0x003C, 0x00, 0x00, 0x00 }, + [BAM_DESC_CNT_TRSHLD] = { 0x0008, 0x00, 0x00, 0x00 }, + [BAM_IRQ_SRCS] = { 0x000C, 0x00, 0x00, 0x00 }, + [BAM_IRQ_SRCS_MSK] = { 0x0010, 0x00, 0x00, 0x00 }, + [BAM_IRQ_SRCS_UNMASKED] = { 0x0030, 0x00, 0x00, 0x00 }, + [BAM_IRQ_STTS] = { 0x0014, 0x00, 0x00, 0x00 }, + [BAM_IRQ_CLR] = { 0x0018, 0x00, 0x00, 0x00 }, + [BAM_IRQ_EN] = { 0x001C, 0x00, 0x00, 0x00 }, + [BAM_CNFG_BITS] = { 0x007C, 0x00, 0x00, 0x00 }, + [BAM_IRQ_SRCS_EE] = { 0x0800, 0x00, 0x00, 0x80 }, + [BAM_IRQ_SRCS_MSK_EE] = { 0x0804, 0x00, 0x00, 0x80 }, + [BAM_P_CTRL] = { 0x1000, 0x1000, 0x00, 0x00 }, + [BAM_P_RST] = { 0x1004, 0x1000, 0x00, 0x00 }, + [BAM_P_HALT] = { 0x1008, 0x1000, 0x00, 0x00 }, + [BAM_P_IRQ_STTS] = { 0x1010, 0x1000, 0x00, 0x00 }, + [BAM_P_IRQ_CLR] = { 0x1014, 0x1000, 0x00, 0x00 }, + [BAM_P_IRQ_EN] = { 0x1018, 0x1000, 0x00, 0x00 }, + [BAM_P_EVNT_DEST_ADDR] = { 0x182C, 0x00, 0x1000, 0x00 }, + [BAM_P_EVNT_REG] = { 0x1818, 0x00, 0x1000, 0x00 }, + [BAM_P_SW_OFSTS] = { 0x1800, 0x00, 0x1000, 0x00 }, + [BAM_P_DATA_FIFO_ADDR] = { 0x1824, 0x00, 0x1000, 0x00 }, + [BAM_P_DESC_FIFO_ADDR] = { 0x181C, 0x00, 0x1000, 0x00 }, + [BAM_P_EVNT_GEN_TRSHLD] = { 0x1828, 0x00, 0x1000, 0x00 }, + [BAM_P_FIFO_SIZES] = { 0x1820, 0x00, 0x1000, 0x00 }, +}; + +static const struct reg_offset_data bam_v1_7_reg_info[] = { + [BAM_CTRL] = { 0x00000, 0x00, 0x00, 0x00 }, + [BAM_REVISION] = { 0x01000, 0x00, 0x00, 0x00 }, + [BAM_NUM_PIPES] = { 0x01008, 0x00, 0x00, 0x00 }, + [BAM_DESC_CNT_TRSHLD] = { 0x00008, 0x00, 0x00, 0x00 }, + [BAM_IRQ_SRCS] = { 0x03010, 0x00, 0x00, 0x00 }, + [BAM_IRQ_SRCS_MSK] = { 0x03014, 0x00, 0x00, 0x00 }, + [BAM_IRQ_SRCS_UNMASKED] = { 0x03018, 0x00, 0x00, 0x00 }, + [BAM_IRQ_STTS] = { 0x00014, 0x00, 0x00, 0x00 }, + [BAM_IRQ_CLR] = { 0x00018, 0x00, 0x00, 0x00 }, + [BAM_IRQ_EN] = { 0x0001C, 0x00, 0x00, 0x00 }, + [BAM_CNFG_BITS] = { 0x0007C, 0x00, 0x00, 0x00 }, + [BAM_IRQ_SRCS_EE] = { 0x03000, 0x00, 0x00, 0x1000 }, + [BAM_IRQ_SRCS_MSK_EE] = { 0x03004, 0x00, 0x00, 0x1000 }, + [BAM_P_CTRL] = { 0x13000, 0x1000, 0x00, 0x00 }, + [BAM_P_RST] = { 0x13004, 0x1000, 0x00, 0x00 }, + [BAM_P_HALT] = { 0x13008, 0x1000, 0x00, 0x00 }, + [BAM_P_IRQ_STTS] = { 0x13010, 0x1000, 0x00, 0x00 }, + [BAM_P_IRQ_CLR] = { 0x13014, 0x1000, 0x00, 0x00 }, + [BAM_P_IRQ_EN] = { 0x13018, 0x1000, 0x00, 0x00 }, + [BAM_P_EVNT_DEST_ADDR] = { 0x1382C, 0x00, 0x1000, 0x00 }, + [BAM_P_EVNT_REG] = { 0x13818, 0x00, 0x1000, 0x00 }, + [BAM_P_SW_OFSTS] = { 0x13800, 0x00, 0x1000, 0x00 }, + [BAM_P_DATA_FIFO_ADDR] = { 0x13824, 0x00, 0x1000, 0x00 }, + [BAM_P_DESC_FIFO_ADDR] = { 0x1381C, 0x00, 0x1000, 0x00 }, + [BAM_P_EVNT_GEN_TRSHLD] = { 0x13828, 0x00, 0x1000, 0x00 }, + [BAM_P_FIFO_SIZES] = { 0x13820, 0x00, 0x1000, 0x00 }, +}; + +/* BAM CTRL */ +#define BAM_SW_RST BIT(0) +#define BAM_EN BIT(1) +#define BAM_EN_ACCUM BIT(4) +#define BAM_TESTBUS_SEL_SHIFT 5 +#define BAM_TESTBUS_SEL_MASK 0x3F +#define BAM_DESC_CACHE_SEL_SHIFT 13 +#define BAM_DESC_CACHE_SEL_MASK 0x3 +#define BAM_CACHED_DESC_STORE BIT(15) +#define IBC_DISABLE BIT(16) + +/* BAM REVISION */ +#define REVISION_SHIFT 0 +#define REVISION_MASK 0xFF +#define NUM_EES_SHIFT 8 +#define NUM_EES_MASK 0xF +#define CE_BUFFER_SIZE BIT(13) +#define AXI_ACTIVE BIT(14) +#define USE_VMIDMT BIT(15) +#define SECURED BIT(16) +#define BAM_HAS_NO_BYPASS BIT(17) +#define HIGH_FREQUENCY_BAM BIT(18) +#define INACTIV_TMRS_EXST BIT(19) +#define NUM_INACTIV_TMRS BIT(20) +#define DESC_CACHE_DEPTH_SHIFT 21 +#define DESC_CACHE_DEPTH_1 (0 << DESC_CACHE_DEPTH_SHIFT) +#define DESC_CACHE_DEPTH_2 (1 << DESC_CACHE_DEPTH_SHIFT) +#define DESC_CACHE_DEPTH_3 (2 << DESC_CACHE_DEPTH_SHIFT) +#define DESC_CACHE_DEPTH_4 (3 << DESC_CACHE_DEPTH_SHIFT) +#define CMD_DESC_EN BIT(23) +#define INACTIV_TMR_BASE_SHIFT 24 +#define INACTIV_TMR_BASE_MASK 0xFF + +/* BAM NUM PIPES */ +#define BAM_NUM_PIPES_SHIFT 0 +#define BAM_NUM_PIPES_MASK 0xFF +#define PERIPH_NON_PIPE_GRP_SHIFT 16 +#define PERIPH_NON_PIP_GRP_MASK 0xFF +#define BAM_NON_PIPE_GRP_SHIFT 24 +#define BAM_NON_PIPE_GRP_MASK 0xFF + +/* BAM CNFG BITS */ +#define BAM_PIPE_CNFG BIT(2) +#define BAM_FULL_PIPE BIT(11) +#define BAM_NO_EXT_P_RST BIT(12) +#define BAM_IBC_DISABLE BIT(13) +#define BAM_SB_CLK_REQ BIT(14) +#define BAM_PSM_CSW_REQ BIT(15) +#define BAM_PSM_P_RES BIT(16) +#define BAM_AU_P_RES BIT(17) +#define BAM_SI_P_RES BIT(18) +#define BAM_WB_P_RES BIT(19) +#define BAM_WB_BLK_CSW BIT(20) +#define BAM_WB_CSW_ACK_IDL BIT(21) +#define BAM_WB_RETR_SVPNT BIT(22) +#define BAM_WB_DSC_AVL_P_RST BIT(23) +#define BAM_REG_P_EN BIT(24) +#define BAM_PSM_P_HD_DATA BIT(25) +#define BAM_AU_ACCUMED BIT(26) +#define BAM_CMD_ENABLE BIT(27) + +#define BAM_CNFG_BITS_DEFAULT (BAM_PIPE_CNFG | \ + BAM_NO_EXT_P_RST | \ + BAM_IBC_DISABLE | \ + BAM_SB_CLK_REQ | \ + BAM_PSM_CSW_REQ | \ + BAM_PSM_P_RES | \ + BAM_AU_P_RES | \ + BAM_SI_P_RES | \ + BAM_WB_P_RES | \ + BAM_WB_BLK_CSW | \ + BAM_WB_CSW_ACK_IDL | \ + BAM_WB_RETR_SVPNT | \ + BAM_WB_DSC_AVL_P_RST | \ + BAM_REG_P_EN | \ + BAM_PSM_P_HD_DATA | \ + BAM_AU_ACCUMED | \ + BAM_CMD_ENABLE) + +/* PIPE CTRL */ +#define P_EN BIT(1) +#define P_DIRECTION BIT(3) +#define P_SYS_STRM BIT(4) +#define P_SYS_MODE BIT(5) +#define P_AUTO_EOB BIT(6) +#define P_AUTO_EOB_SEL_SHIFT 7 +#define P_AUTO_EOB_SEL_512 (0 << P_AUTO_EOB_SEL_SHIFT) +#define P_AUTO_EOB_SEL_256 (1 << P_AUTO_EOB_SEL_SHIFT) +#define P_AUTO_EOB_SEL_128 (2 << P_AUTO_EOB_SEL_SHIFT) +#define P_AUTO_EOB_SEL_64 (3 << P_AUTO_EOB_SEL_SHIFT) +#define P_PREFETCH_LIMIT_SHIFT 9 +#define P_PREFETCH_LIMIT_32 (0 << P_PREFETCH_LIMIT_SHIFT) +#define P_PREFETCH_LIMIT_16 (1 << P_PREFETCH_LIMIT_SHIFT) +#define P_PREFETCH_LIMIT_4 (2 << P_PREFETCH_LIMIT_SHIFT) +#define P_WRITE_NWD BIT(11) +#define P_LOCK_GROUP_SHIFT 16 +#define P_LOCK_GROUP_MASK 0x1F + +/* BAM_DESC_CNT_TRSHLD */ +#define CNT_TRSHLD 0xffff +#define DEFAULT_CNT_THRSHLD 0x4 + +/* BAM_IRQ_SRCS */ +#define BAM_IRQ BIT(31) +#define P_IRQ 0x7fffffff + +/* BAM_IRQ_SRCS_MSK */ +#define BAM_IRQ_MSK BAM_IRQ +#define P_IRQ_MSK P_IRQ + +/* BAM_IRQ_STTS */ +#define BAM_TIMER_IRQ BIT(4) +#define BAM_EMPTY_IRQ BIT(3) +#define BAM_ERROR_IRQ BIT(2) +#define BAM_HRESP_ERR_IRQ BIT(1) + +/* BAM_IRQ_CLR */ +#define BAM_TIMER_CLR BIT(4) +#define BAM_EMPTY_CLR BIT(3) +#define BAM_ERROR_CLR BIT(2) +#define BAM_HRESP_ERR_CLR BIT(1) + +/* BAM_IRQ_EN */ +#define BAM_TIMER_EN BIT(4) +#define BAM_EMPTY_EN BIT(3) +#define BAM_ERROR_EN BIT(2) +#define BAM_HRESP_ERR_EN BIT(1) + +/* BAM_P_IRQ_EN */ +#define P_PRCSD_DESC_EN BIT(0) +#define P_TIMER_EN BIT(1) +#define P_WAKE_EN BIT(2) +#define P_OUT_OF_DESC_EN BIT(3) +#define P_ERR_EN BIT(4) +#define P_TRNSFR_END_EN BIT(5) +#define P_DEFAULT_IRQS_EN (P_PRCSD_DESC_EN | P_ERR_EN | P_TRNSFR_END_EN) + +/* BAM_P_SW_OFSTS */ +#define P_SW_OFSTS_MASK 0xffff + +#define BAM_DESC_FIFO_SIZE SZ_32K +#define MAX_DESCRIPTORS (BAM_DESC_FIFO_SIZE / sizeof(struct bam_desc_hw) - 1) +#define BAM_MAX_DATA_SIZE (SZ_32K - 8) + +struct bam_chan { + struct virt_dma_chan vc; + + struct bam_device *bdev; + + /* configuration from device tree */ + u32 id; + + struct bam_async_desc *curr_txd; /* current running dma */ + + /* runtime configuration */ + struct dma_slave_config slave; + + /* fifo storage */ + struct bam_desc_hw *fifo_virt; + dma_addr_t fifo_phys; + + /* fifo markers */ + unsigned short head; /* start of active descriptor entries */ + unsigned short tail; /* end of active descriptor entries */ + + unsigned int initialized; /* is the channel hw initialized? */ + unsigned int paused; /* is the channel paused? */ + unsigned int reconfigure; /* new slave config? */ + + struct list_head node; +}; + +static inline struct bam_chan *to_bam_chan(struct dma_chan *common) +{ + return container_of(common, struct bam_chan, vc.chan); +} + +struct bam_device { + void __iomem *regs; + struct device *dev; + struct dma_device common; + struct device_dma_parameters dma_parms; + struct bam_chan *channels; + u32 num_channels; + + /* execution environment ID, from DT */ + u32 ee; + + const struct reg_offset_data *layout; + + struct clk *bamclk; + int irq; + + /* dma start transaction tasklet */ + struct tasklet_struct task; +}; + +/** + * bam_addr - returns BAM register address + * @bdev: bam device + * @pipe: pipe instance (ignored when register doesn't have multiple instances) + * @reg: register enum + */ +static inline void __iomem *bam_addr(struct bam_device *bdev, u32 pipe, + enum bam_reg reg) +{ + const struct reg_offset_data r = bdev->layout[reg]; + + return bdev->regs + r.base_offset + + r.pipe_mult * pipe + + r.evnt_mult * pipe + + r.ee_mult * bdev->ee; +} + +/** + * bam_reset_channel - Reset individual BAM DMA channel + * @bchan: bam channel + * + * This function resets a specific BAM channel + */ +static void bam_reset_channel(struct bam_chan *bchan) +{ + struct bam_device *bdev = bchan->bdev; + + lockdep_assert_held(&bchan->vc.lock); + + /* reset channel */ + writel_relaxed(1, bam_addr(bdev, bchan->id, BAM_P_RST)); + writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_RST)); + + /* don't allow cpu to reorder BAM register accesses done after this */ + wmb(); + + /* make sure hw is initialized when channel is used the first time */ + bchan->initialized = 0; +} + +/** + * bam_chan_init_hw - Initialize channel hardware + * @bchan: bam channel + * + * This function resets and initializes the BAM channel + */ +static void bam_chan_init_hw(struct bam_chan *bchan, + enum dma_transfer_direction dir) +{ + struct bam_device *bdev = bchan->bdev; + u32 val; + + /* Reset the channel to clear internal state of the FIFO */ + bam_reset_channel(bchan); + + /* + * write out 8 byte aligned address. We have enough space for this + * because we allocated 1 more descriptor (8 bytes) than we can use + */ + writel_relaxed(ALIGN(bchan->fifo_phys, sizeof(struct bam_desc_hw)), + bam_addr(bdev, bchan->id, BAM_P_DESC_FIFO_ADDR)); + writel_relaxed(BAM_DESC_FIFO_SIZE, + bam_addr(bdev, bchan->id, BAM_P_FIFO_SIZES)); + + /* enable the per pipe interrupts, enable EOT, ERR, and INT irqs */ + writel_relaxed(P_DEFAULT_IRQS_EN, + bam_addr(bdev, bchan->id, BAM_P_IRQ_EN)); + + /* unmask the specific pipe and EE combo */ + val = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); + val |= BIT(bchan->id); + writel_relaxed(val, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); + + /* don't allow cpu to reorder the channel enable done below */ + wmb(); + + /* set fixed direction and mode, then enable channel */ + val = P_EN | P_SYS_MODE; + if (dir == DMA_DEV_TO_MEM) + val |= P_DIRECTION; + + writel_relaxed(val, bam_addr(bdev, bchan->id, BAM_P_CTRL)); + + bchan->initialized = 1; + + /* init FIFO pointers */ + bchan->head = 0; + bchan->tail = 0; +} + +/** + * bam_alloc_chan - Allocate channel resources for DMA channel. + * @chan: specified channel + * + * This function allocates the FIFO descriptor memory + */ +static int bam_alloc_chan(struct dma_chan *chan) +{ + struct bam_chan *bchan = to_bam_chan(chan); + struct bam_device *bdev = bchan->bdev; + + if (bchan->fifo_virt) + return 0; + + /* allocate FIFO descriptor space, but only if necessary */ + bchan->fifo_virt = dma_alloc_writecombine(bdev->dev, BAM_DESC_FIFO_SIZE, + &bchan->fifo_phys, GFP_KERNEL); + + if (!bchan->fifo_virt) { + dev_err(bdev->dev, "Failed to allocate desc fifo\n"); + return -ENOMEM; + } + + return 0; +} + +/** + * bam_free_chan - Frees dma resources associated with specific channel + * @chan: specified channel + * + * Free the allocated fifo descriptor memory and channel resources + * + */ +static void bam_free_chan(struct dma_chan *chan) +{ + struct bam_chan *bchan = to_bam_chan(chan); + struct bam_device *bdev = bchan->bdev; + u32 val; + unsigned long flags; + + vchan_free_chan_resources(to_virt_chan(chan)); + + if (bchan->curr_txd) { + dev_err(bchan->bdev->dev, "Cannot free busy channel\n"); + return; + } + + spin_lock_irqsave(&bchan->vc.lock, flags); + bam_reset_channel(bchan); + spin_unlock_irqrestore(&bchan->vc.lock, flags); + + dma_free_writecombine(bdev->dev, BAM_DESC_FIFO_SIZE, bchan->fifo_virt, + bchan->fifo_phys); + bchan->fifo_virt = NULL; + + /* mask irq for pipe/channel */ + val = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); + val &= ~BIT(bchan->id); + writel_relaxed(val, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); + + /* disable irq */ + writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_IRQ_EN)); +} + +/** + * bam_slave_config - set slave configuration for channel + * @chan: dma channel + * @cfg: slave configuration + * + * Sets slave configuration for channel + * + */ +static int bam_slave_config(struct dma_chan *chan, + struct dma_slave_config *cfg) +{ + struct bam_chan *bchan = to_bam_chan(chan); + unsigned long flag; + + spin_lock_irqsave(&bchan->vc.lock, flag); + memcpy(&bchan->slave, cfg, sizeof(*cfg)); + bchan->reconfigure = 1; + spin_unlock_irqrestore(&bchan->vc.lock, flag); + + return 0; +} + +/** + * bam_prep_slave_sg - Prep slave sg transaction + * + * @chan: dma channel + * @sgl: scatter gather list + * @sg_len: length of sg + * @direction: DMA transfer direction + * @flags: DMA flags + * @context: transfer context (unused) + */ +static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan, + struct scatterlist *sgl, unsigned int sg_len, + enum dma_transfer_direction direction, unsigned long flags, + void *context) +{ + struct bam_chan *bchan = to_bam_chan(chan); + struct bam_device *bdev = bchan->bdev; + struct bam_async_desc *async_desc; + struct scatterlist *sg; + u32 i; + struct bam_desc_hw *desc; + unsigned int num_alloc = 0; + + + if (!is_slave_direction(direction)) { + dev_err(bdev->dev, "invalid dma direction\n"); + return NULL; + } + + /* calculate number of required entries */ + for_each_sg(sgl, sg, sg_len, i) + num_alloc += DIV_ROUND_UP(sg_dma_len(sg), BAM_MAX_DATA_SIZE); + + /* allocate enough room to accomodate the number of entries */ + async_desc = kzalloc(sizeof(*async_desc) + + (num_alloc * sizeof(struct bam_desc_hw)), GFP_NOWAIT); + + if (!async_desc) + goto err_out; + + if (flags & DMA_PREP_FENCE) + async_desc->flags |= DESC_FLAG_NWD; + + if (flags & DMA_PREP_INTERRUPT) + async_desc->flags |= DESC_FLAG_EOT; + else + async_desc->flags |= DESC_FLAG_INT; + + async_desc->num_desc = num_alloc; + async_desc->curr_desc = async_desc->desc; + async_desc->dir = direction; + + /* fill in temporary descriptors */ + desc = async_desc->desc; + for_each_sg(sgl, sg, sg_len, i) { + unsigned int remainder = sg_dma_len(sg); + unsigned int curr_offset = 0; + + do { + desc->addr = sg_dma_address(sg) + curr_offset; + + if (remainder > BAM_MAX_DATA_SIZE) { + desc->size = BAM_MAX_DATA_SIZE; + remainder -= BAM_MAX_DATA_SIZE; + curr_offset += BAM_MAX_DATA_SIZE; + } else { + desc->size = remainder; + remainder = 0; + } + + async_desc->length += desc->size; + desc++; + } while (remainder > 0); + } + + return vchan_tx_prep(&bchan->vc, &async_desc->vd, flags); + +err_out: + kfree(async_desc); + return NULL; +} + +/** + * bam_dma_terminate_all - terminate all transactions on a channel + * @bchan: bam dma channel + * + * Dequeues and frees all transactions + * No callbacks are done + * + */ +static int bam_dma_terminate_all(struct dma_chan *chan) +{ + struct bam_chan *bchan = to_bam_chan(chan); + unsigned long flag; + LIST_HEAD(head); + + /* remove all transactions, including active transaction */ + spin_lock_irqsave(&bchan->vc.lock, flag); + if (bchan->curr_txd) { + list_add(&bchan->curr_txd->vd.node, &bchan->vc.desc_issued); + bchan->curr_txd = NULL; + } + + vchan_get_all_descriptors(&bchan->vc, &head); + spin_unlock_irqrestore(&bchan->vc.lock, flag); + + vchan_dma_desc_free_list(&bchan->vc, &head); + + return 0; +} + +/** + * bam_pause - Pause DMA channel + * @chan: dma channel + * + */ +static int bam_pause(struct dma_chan *chan) +{ + struct bam_chan *bchan = to_bam_chan(chan); + struct bam_device *bdev = bchan->bdev; + unsigned long flag; + + spin_lock_irqsave(&bchan->vc.lock, flag); + writel_relaxed(1, bam_addr(bdev, bchan->id, BAM_P_HALT)); + bchan->paused = 1; + spin_unlock_irqrestore(&bchan->vc.lock, flag); + + return 0; +} + +/** + * bam_resume - Resume DMA channel operations + * @chan: dma channel + * + */ +static int bam_resume(struct dma_chan *chan) +{ + struct bam_chan *bchan = to_bam_chan(chan); + struct bam_device *bdev = bchan->bdev; + unsigned long flag; + + spin_lock_irqsave(&bchan->vc.lock, flag); + writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_HALT)); + bchan->paused = 0; + spin_unlock_irqrestore(&bchan->vc.lock, flag); + + return 0; +} + +/** + * process_channel_irqs - processes the channel interrupts + * @bdev: bam controller + * + * This function processes the channel interrupts + * + */ +static u32 process_channel_irqs(struct bam_device *bdev) +{ + u32 i, srcs, pipe_stts; + unsigned long flags; + struct bam_async_desc *async_desc; + + srcs = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_EE)); + + /* return early if no pipe/channel interrupts are present */ + if (!(srcs & P_IRQ)) + return srcs; + + for (i = 0; i < bdev->num_channels; i++) { + struct bam_chan *bchan = &bdev->channels[i]; + + if (!(srcs & BIT(i))) + continue; + + /* clear pipe irq */ + pipe_stts = readl_relaxed(bam_addr(bdev, i, BAM_P_IRQ_STTS)); + + writel_relaxed(pipe_stts, bam_addr(bdev, i, BAM_P_IRQ_CLR)); + + spin_lock_irqsave(&bchan->vc.lock, flags); + async_desc = bchan->curr_txd; + + if (async_desc) { + async_desc->num_desc -= async_desc->xfer_len; + async_desc->curr_desc += async_desc->xfer_len; + bchan->curr_txd = NULL; + + /* manage FIFO */ + bchan->head += async_desc->xfer_len; + bchan->head %= MAX_DESCRIPTORS; + + /* + * if complete, process cookie. Otherwise + * push back to front of desc_issued so that + * it gets restarted by the tasklet + */ + if (!async_desc->num_desc) + vchan_cookie_complete(&async_desc->vd); + else + list_add(&async_desc->vd.node, + &bchan->vc.desc_issued); + } + + spin_unlock_irqrestore(&bchan->vc.lock, flags); + } + + return srcs; +} + +/** + * bam_dma_irq - irq handler for bam controller + * @irq: IRQ of interrupt + * @data: callback data + * + * IRQ handler for the bam controller + */ +static irqreturn_t bam_dma_irq(int irq, void *data) +{ + struct bam_device *bdev = data; + u32 clr_mask = 0, srcs = 0; + + srcs |= process_channel_irqs(bdev); + + /* kick off tasklet to start next dma transfer */ + if (srcs & P_IRQ) + tasklet_schedule(&bdev->task); + + if (srcs & BAM_IRQ) + clr_mask = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_STTS)); + + /* don't allow reorder of the various accesses to the BAM registers */ + mb(); + + writel_relaxed(clr_mask, bam_addr(bdev, 0, BAM_IRQ_CLR)); + + return IRQ_HANDLED; +} + +/** + * bam_tx_status - returns status of transaction + * @chan: dma channel + * @cookie: transaction cookie + * @txstate: DMA transaction state + * + * Return status of dma transaction + */ +static enum dma_status bam_tx_status(struct dma_chan *chan, dma_cookie_t cookie, + struct dma_tx_state *txstate) +{ + struct bam_chan *bchan = to_bam_chan(chan); + struct virt_dma_desc *vd; + int ret; + size_t residue = 0; + unsigned int i; + unsigned long flags; + + ret = dma_cookie_status(chan, cookie, txstate); + if (ret == DMA_COMPLETE) + return ret; + + if (!txstate) + return bchan->paused ? DMA_PAUSED : ret; + + spin_lock_irqsave(&bchan->vc.lock, flags); + vd = vchan_find_desc(&bchan->vc, cookie); + if (vd) + residue = container_of(vd, struct bam_async_desc, vd)->length; + else if (bchan->curr_txd && bchan->curr_txd->vd.tx.cookie == cookie) + for (i = 0; i < bchan->curr_txd->num_desc; i++) + residue += bchan->curr_txd->curr_desc[i].size; + + spin_unlock_irqrestore(&bchan->vc.lock, flags); + + dma_set_residue(txstate, residue); + + if (ret == DMA_IN_PROGRESS && bchan->paused) + ret = DMA_PAUSED; + + return ret; +} + +/** + * bam_apply_new_config + * @bchan: bam dma channel + * @dir: DMA direction + */ +static void bam_apply_new_config(struct bam_chan *bchan, + enum dma_transfer_direction dir) +{ + struct bam_device *bdev = bchan->bdev; + u32 maxburst; + + if (dir == DMA_DEV_TO_MEM) + maxburst = bchan->slave.src_maxburst; + else + maxburst = bchan->slave.dst_maxburst; + + writel_relaxed(maxburst, bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD)); + + bchan->reconfigure = 0; +} + +/** + * bam_start_dma - start next transaction + * @bchan - bam dma channel + */ +static void bam_start_dma(struct bam_chan *bchan) +{ + struct virt_dma_desc *vd = vchan_next_desc(&bchan->vc); + struct bam_device *bdev = bchan->bdev; + struct bam_async_desc *async_desc; + struct bam_desc_hw *desc; + struct bam_desc_hw *fifo = PTR_ALIGN(bchan->fifo_virt, + sizeof(struct bam_desc_hw)); + + lockdep_assert_held(&bchan->vc.lock); + + if (!vd) + return; + + list_del(&vd->node); + + async_desc = container_of(vd, struct bam_async_desc, vd); + bchan->curr_txd = async_desc; + + /* on first use, initialize the channel hardware */ + if (!bchan->initialized) + bam_chan_init_hw(bchan, async_desc->dir); + + /* apply new slave config changes, if necessary */ + if (bchan->reconfigure) + bam_apply_new_config(bchan, async_desc->dir); + + desc = bchan->curr_txd->curr_desc; + + if (async_desc->num_desc > MAX_DESCRIPTORS) + async_desc->xfer_len = MAX_DESCRIPTORS; + else + async_desc->xfer_len = async_desc->num_desc; + + /* set any special flags on the last descriptor */ + if (async_desc->num_desc == async_desc->xfer_len) + desc[async_desc->xfer_len - 1].flags = async_desc->flags; + else + desc[async_desc->xfer_len - 1].flags |= DESC_FLAG_INT; + + if (bchan->tail + async_desc->xfer_len > MAX_DESCRIPTORS) { + u32 partial = MAX_DESCRIPTORS - bchan->tail; + + memcpy(&fifo[bchan->tail], desc, + partial * sizeof(struct bam_desc_hw)); + memcpy(fifo, &desc[partial], (async_desc->xfer_len - partial) * + sizeof(struct bam_desc_hw)); + } else { + memcpy(&fifo[bchan->tail], desc, + async_desc->xfer_len * sizeof(struct bam_desc_hw)); + } + + bchan->tail += async_desc->xfer_len; + bchan->tail %= MAX_DESCRIPTORS; + + /* ensure descriptor writes and dma start not reordered */ + wmb(); + writel_relaxed(bchan->tail * sizeof(struct bam_desc_hw), + bam_addr(bdev, bchan->id, BAM_P_EVNT_REG)); +} + +/** + * dma_tasklet - DMA IRQ tasklet + * @data: tasklet argument (bam controller structure) + * + * Sets up next DMA operation and then processes all completed transactions + */ +static void dma_tasklet(unsigned long data) +{ + struct bam_device *bdev = (struct bam_device *)data; + struct bam_chan *bchan; + unsigned long flags; + unsigned int i; + + /* go through the channels and kick off transactions */ + for (i = 0; i < bdev->num_channels; i++) { + bchan = &bdev->channels[i]; + spin_lock_irqsave(&bchan->vc.lock, flags); + + if (!list_empty(&bchan->vc.desc_issued) && !bchan->curr_txd) + bam_start_dma(bchan); + spin_unlock_irqrestore(&bchan->vc.lock, flags); + } +} + +/** + * bam_issue_pending - starts pending transactions + * @chan: dma channel + * + * Calls tasklet directly which in turn starts any pending transactions + */ +static void bam_issue_pending(struct dma_chan *chan) +{ + struct bam_chan *bchan = to_bam_chan(chan); + unsigned long flags; + + spin_lock_irqsave(&bchan->vc.lock, flags); + + /* if work pending and idle, start a transaction */ + if (vchan_issue_pending(&bchan->vc) && !bchan->curr_txd) + bam_start_dma(bchan); + + spin_unlock_irqrestore(&bchan->vc.lock, flags); +} + +/** + * bam_dma_free_desc - free descriptor memory + * @vd: virtual descriptor + * + */ +static void bam_dma_free_desc(struct virt_dma_desc *vd) +{ + struct bam_async_desc *async_desc = container_of(vd, + struct bam_async_desc, vd); + + kfree(async_desc); +} + +static struct dma_chan *bam_dma_xlate(struct of_phandle_args *dma_spec, + struct of_dma *of) +{ + struct bam_device *bdev = container_of(of->of_dma_data, + struct bam_device, common); + unsigned int request; + + if (dma_spec->args_count != 1) + return NULL; + + request = dma_spec->args[0]; + if (request >= bdev->num_channels) + return NULL; + + return dma_get_slave_channel(&(bdev->channels[request].vc.chan)); +} + +/** + * bam_init + * @bdev: bam device + * + * Initialization helper for global bam registers + */ +static int bam_init(struct bam_device *bdev) +{ + u32 val; + + /* read revision and configuration information */ + val = readl_relaxed(bam_addr(bdev, 0, BAM_REVISION)) >> NUM_EES_SHIFT; + val &= NUM_EES_MASK; + + /* check that configured EE is within range */ + if (bdev->ee >= val) + return -EINVAL; + + val = readl_relaxed(bam_addr(bdev, 0, BAM_NUM_PIPES)); + bdev->num_channels = val & BAM_NUM_PIPES_MASK; + + /* s/w reset bam */ + /* after reset all pipes are disabled and idle */ + val = readl_relaxed(bam_addr(bdev, 0, BAM_CTRL)); + val |= BAM_SW_RST; + writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); + val &= ~BAM_SW_RST; + writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); + + /* make sure previous stores are visible before enabling BAM */ + wmb(); + + /* enable bam */ + val |= BAM_EN; + writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); + + /* set descriptor threshhold, start with 4 bytes */ + writel_relaxed(DEFAULT_CNT_THRSHLD, + bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD)); + + /* Enable default set of h/w workarounds, ie all except BAM_FULL_PIPE */ + writel_relaxed(BAM_CNFG_BITS_DEFAULT, bam_addr(bdev, 0, BAM_CNFG_BITS)); + + /* enable irqs for errors */ + writel_relaxed(BAM_ERROR_EN | BAM_HRESP_ERR_EN, + bam_addr(bdev, 0, BAM_IRQ_EN)); + + /* unmask global bam interrupt */ + writel_relaxed(BAM_IRQ_MSK, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); + + return 0; +} + +static void bam_channel_init(struct bam_device *bdev, struct bam_chan *bchan, + u32 index) +{ + bchan->id = index; + bchan->bdev = bdev; + + vchan_init(&bchan->vc, &bdev->common); + bchan->vc.desc_free = bam_dma_free_desc; +} + +static const struct of_device_id bam_of_match[] = { + { .compatible = "qcom,bam-v1.3.0", .data = &bam_v1_3_reg_info }, + { .compatible = "qcom,bam-v1.4.0", .data = &bam_v1_4_reg_info }, + { .compatible = "qcom,bam-v1.7.0", .data = &bam_v1_7_reg_info }, + {} +}; + +MODULE_DEVICE_TABLE(of, bam_of_match); + +static int bam_dma_probe(struct platform_device *pdev) +{ + struct bam_device *bdev; + const struct of_device_id *match; + struct resource *iores; + int ret, i; + + bdev = devm_kzalloc(&pdev->dev, sizeof(*bdev), GFP_KERNEL); + if (!bdev) + return -ENOMEM; + + bdev->dev = &pdev->dev; + + match = of_match_node(bam_of_match, pdev->dev.of_node); + if (!match) { + dev_err(&pdev->dev, "Unsupported BAM module\n"); + return -ENODEV; + } + + bdev->layout = match->data; + + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + bdev->regs = devm_ioremap_resource(&pdev->dev, iores); + if (IS_ERR(bdev->regs)) + return PTR_ERR(bdev->regs); + + bdev->irq = platform_get_irq(pdev, 0); + if (bdev->irq < 0) + return bdev->irq; + + ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &bdev->ee); + if (ret) { + dev_err(bdev->dev, "Execution environment unspecified\n"); + return ret; + } + + bdev->bamclk = devm_clk_get(bdev->dev, "bam_clk"); + if (IS_ERR(bdev->bamclk)) + return PTR_ERR(bdev->bamclk); + + ret = clk_prepare_enable(bdev->bamclk); + if (ret) { + dev_err(bdev->dev, "failed to prepare/enable clock\n"); + return ret; + } + + ret = bam_init(bdev); + if (ret) + goto err_disable_clk; + + tasklet_init(&bdev->task, dma_tasklet, (unsigned long)bdev); + + bdev->channels = devm_kcalloc(bdev->dev, bdev->num_channels, + sizeof(*bdev->channels), GFP_KERNEL); + + if (!bdev->channels) { + ret = -ENOMEM; + goto err_tasklet_kill; + } + + /* allocate and initialize channels */ + INIT_LIST_HEAD(&bdev->common.channels); + + for (i = 0; i < bdev->num_channels; i++) + bam_channel_init(bdev, &bdev->channels[i], i); + + ret = devm_request_irq(bdev->dev, bdev->irq, bam_dma_irq, + IRQF_TRIGGER_HIGH, "bam_dma", bdev); + if (ret) + goto err_bam_channel_exit; + + /* set max dma segment size */ + bdev->common.dev = bdev->dev; + bdev->common.dev->dma_parms = &bdev->dma_parms; + ret = dma_set_max_seg_size(bdev->common.dev, BAM_MAX_DATA_SIZE); + if (ret) { + dev_err(bdev->dev, "cannot set maximum segment size\n"); + goto err_bam_channel_exit; + } + + platform_set_drvdata(pdev, bdev); + + /* set capabilities */ + dma_cap_zero(bdev->common.cap_mask); + dma_cap_set(DMA_SLAVE, bdev->common.cap_mask); + + /* initialize dmaengine apis */ + bdev->common.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); + bdev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT; + bdev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; + bdev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; + bdev->common.device_alloc_chan_resources = bam_alloc_chan; + bdev->common.device_free_chan_resources = bam_free_chan; + bdev->common.device_prep_slave_sg = bam_prep_slave_sg; + bdev->common.device_config = bam_slave_config; + bdev->common.device_pause = bam_pause; + bdev->common.device_resume = bam_resume; + bdev->common.device_terminate_all = bam_dma_terminate_all; + bdev->common.device_issue_pending = bam_issue_pending; + bdev->common.device_tx_status = bam_tx_status; + bdev->common.dev = bdev->dev; + + ret = dma_async_device_register(&bdev->common); + if (ret) { + dev_err(bdev->dev, "failed to register dma async device\n"); + goto err_bam_channel_exit; + } + + ret = of_dma_controller_register(pdev->dev.of_node, bam_dma_xlate, + &bdev->common); + if (ret) + goto err_unregister_dma; + + return 0; + +err_unregister_dma: + dma_async_device_unregister(&bdev->common); +err_bam_channel_exit: + for (i = 0; i < bdev->num_channels; i++) + tasklet_kill(&bdev->channels[i].vc.task); +err_tasklet_kill: + tasklet_kill(&bdev->task); +err_disable_clk: + clk_disable_unprepare(bdev->bamclk); + + return ret; +} + +static int bam_dma_remove(struct platform_device *pdev) +{ + struct bam_device *bdev = platform_get_drvdata(pdev); + u32 i; + + of_dma_controller_free(pdev->dev.of_node); + dma_async_device_unregister(&bdev->common); + + /* mask all interrupts for this execution environment */ + writel_relaxed(0, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); + + devm_free_irq(bdev->dev, bdev->irq, bdev); + + for (i = 0; i < bdev->num_channels; i++) { + bam_dma_terminate_all(&bdev->channels[i].vc.chan); + tasklet_kill(&bdev->channels[i].vc.task); + + dma_free_writecombine(bdev->dev, BAM_DESC_FIFO_SIZE, + bdev->channels[i].fifo_virt, + bdev->channels[i].fifo_phys); + } + + tasklet_kill(&bdev->task); + + clk_disable_unprepare(bdev->bamclk); + + return 0; +} + +static struct platform_driver bam_dma_driver = { + .probe = bam_dma_probe, + .remove = bam_dma_remove, + .driver = { + .name = "bam-dma-engine", + .of_match_table = bam_of_match, + }, +}; + +module_platform_driver(bam_dma_driver); + +MODULE_AUTHOR("Andy Gross "); +MODULE_DESCRIPTION("QCOM BAM DMA engine driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/dma/qcom_bam_dma.c b/drivers/dma/qcom_bam_dma.c deleted file mode 100644 index 5a250cd..0000000 --- a/drivers/dma/qcom_bam_dma.c +++ /dev/null @@ -1,1259 +0,0 @@ -/* - * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -/* - * QCOM BAM DMA engine driver - * - * QCOM BAM DMA blocks are distributed amongst a number of the on-chip - * peripherals on the MSM 8x74. The configuration of the channels are dependent - * on the way they are hard wired to that specific peripheral. The peripheral - * device tree entries specify the configuration of each channel. - * - * The DMA controller requires the use of external memory for storage of the - * hardware descriptors for each channel. The descriptor FIFO is accessed as a - * circular buffer and operations are managed according to the offset within the - * FIFO. After pipe/channel reset, all of the pipe registers and internal state - * are back to defaults. - * - * During DMA operations, we write descriptors to the FIFO, being careful to - * handle wrapping and then write the last FIFO offset to that channel's - * P_EVNT_REG register to kick off the transaction. The P_SW_OFSTS register - * indicates the current FIFO offset that is being processed, so there is some - * indication of where the hardware is currently working. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "dmaengine.h" -#include "virt-dma.h" - -struct bam_desc_hw { - u32 addr; /* Buffer physical address */ - u16 size; /* Buffer size in bytes */ - u16 flags; -}; - -#define DESC_FLAG_INT BIT(15) -#define DESC_FLAG_EOT BIT(14) -#define DESC_FLAG_EOB BIT(13) -#define DESC_FLAG_NWD BIT(12) - -struct bam_async_desc { - struct virt_dma_desc vd; - - u32 num_desc; - u32 xfer_len; - - /* transaction flags, EOT|EOB|NWD */ - u16 flags; - - struct bam_desc_hw *curr_desc; - - enum dma_transfer_direction dir; - size_t length; - struct bam_desc_hw desc[0]; -}; - -enum bam_reg { - BAM_CTRL, - BAM_REVISION, - BAM_NUM_PIPES, - BAM_DESC_CNT_TRSHLD, - BAM_IRQ_SRCS, - BAM_IRQ_SRCS_MSK, - BAM_IRQ_SRCS_UNMASKED, - BAM_IRQ_STTS, - BAM_IRQ_CLR, - BAM_IRQ_EN, - BAM_CNFG_BITS, - BAM_IRQ_SRCS_EE, - BAM_IRQ_SRCS_MSK_EE, - BAM_P_CTRL, - BAM_P_RST, - BAM_P_HALT, - BAM_P_IRQ_STTS, - BAM_P_IRQ_CLR, - BAM_P_IRQ_EN, - BAM_P_EVNT_DEST_ADDR, - BAM_P_EVNT_REG, - BAM_P_SW_OFSTS, - BAM_P_DATA_FIFO_ADDR, - BAM_P_DESC_FIFO_ADDR, - BAM_P_EVNT_GEN_TRSHLD, - BAM_P_FIFO_SIZES, -}; - -struct reg_offset_data { - u32 base_offset; - unsigned int pipe_mult, evnt_mult, ee_mult; -}; - -static const struct reg_offset_data bam_v1_3_reg_info[] = { - [BAM_CTRL] = { 0x0F80, 0x00, 0x00, 0x00 }, - [BAM_REVISION] = { 0x0F84, 0x00, 0x00, 0x00 }, - [BAM_NUM_PIPES] = { 0x0FBC, 0x00, 0x00, 0x00 }, - [BAM_DESC_CNT_TRSHLD] = { 0x0F88, 0x00, 0x00, 0x00 }, - [BAM_IRQ_SRCS] = { 0x0F8C, 0x00, 0x00, 0x00 }, - [BAM_IRQ_SRCS_MSK] = { 0x0F90, 0x00, 0x00, 0x00 }, - [BAM_IRQ_SRCS_UNMASKED] = { 0x0FB0, 0x00, 0x00, 0x00 }, - [BAM_IRQ_STTS] = { 0x0F94, 0x00, 0x00, 0x00 }, - [BAM_IRQ_CLR] = { 0x0F98, 0x00, 0x00, 0x00 }, - [BAM_IRQ_EN] = { 0x0F9C, 0x00, 0x00, 0x00 }, - [BAM_CNFG_BITS] = { 0x0FFC, 0x00, 0x00, 0x00 }, - [BAM_IRQ_SRCS_EE] = { 0x1800, 0x00, 0x00, 0x80 }, - [BAM_IRQ_SRCS_MSK_EE] = { 0x1804, 0x00, 0x00, 0x80 }, - [BAM_P_CTRL] = { 0x0000, 0x80, 0x00, 0x00 }, - [BAM_P_RST] = { 0x0004, 0x80, 0x00, 0x00 }, - [BAM_P_HALT] = { 0x0008, 0x80, 0x00, 0x00 }, - [BAM_P_IRQ_STTS] = { 0x0010, 0x80, 0x00, 0x00 }, - [BAM_P_IRQ_CLR] = { 0x0014, 0x80, 0x00, 0x00 }, - [BAM_P_IRQ_EN] = { 0x0018, 0x80, 0x00, 0x00 }, - [BAM_P_EVNT_DEST_ADDR] = { 0x102C, 0x00, 0x40, 0x00 }, - [BAM_P_EVNT_REG] = { 0x1018, 0x00, 0x40, 0x00 }, - [BAM_P_SW_OFSTS] = { 0x1000, 0x00, 0x40, 0x00 }, - [BAM_P_DATA_FIFO_ADDR] = { 0x1024, 0x00, 0x40, 0x00 }, - [BAM_P_DESC_FIFO_ADDR] = { 0x101C, 0x00, 0x40, 0x00 }, - [BAM_P_EVNT_GEN_TRSHLD] = { 0x1028, 0x00, 0x40, 0x00 }, - [BAM_P_FIFO_SIZES] = { 0x1020, 0x00, 0x40, 0x00 }, -}; - -static const struct reg_offset_data bam_v1_4_reg_info[] = { - [BAM_CTRL] = { 0x0000, 0x00, 0x00, 0x00 }, - [BAM_REVISION] = { 0x0004, 0x00, 0x00, 0x00 }, - [BAM_NUM_PIPES] = { 0x003C, 0x00, 0x00, 0x00 }, - [BAM_DESC_CNT_TRSHLD] = { 0x0008, 0x00, 0x00, 0x00 }, - [BAM_IRQ_SRCS] = { 0x000C, 0x00, 0x00, 0x00 }, - [BAM_IRQ_SRCS_MSK] = { 0x0010, 0x00, 0x00, 0x00 }, - [BAM_IRQ_SRCS_UNMASKED] = { 0x0030, 0x00, 0x00, 0x00 }, - [BAM_IRQ_STTS] = { 0x0014, 0x00, 0x00, 0x00 }, - [BAM_IRQ_CLR] = { 0x0018, 0x00, 0x00, 0x00 }, - [BAM_IRQ_EN] = { 0x001C, 0x00, 0x00, 0x00 }, - [BAM_CNFG_BITS] = { 0x007C, 0x00, 0x00, 0x00 }, - [BAM_IRQ_SRCS_EE] = { 0x0800, 0x00, 0x00, 0x80 }, - [BAM_IRQ_SRCS_MSK_EE] = { 0x0804, 0x00, 0x00, 0x80 }, - [BAM_P_CTRL] = { 0x1000, 0x1000, 0x00, 0x00 }, - [BAM_P_RST] = { 0x1004, 0x1000, 0x00, 0x00 }, - [BAM_P_HALT] = { 0x1008, 0x1000, 0x00, 0x00 }, - [BAM_P_IRQ_STTS] = { 0x1010, 0x1000, 0x00, 0x00 }, - [BAM_P_IRQ_CLR] = { 0x1014, 0x1000, 0x00, 0x00 }, - [BAM_P_IRQ_EN] = { 0x1018, 0x1000, 0x00, 0x00 }, - [BAM_P_EVNT_DEST_ADDR] = { 0x182C, 0x00, 0x1000, 0x00 }, - [BAM_P_EVNT_REG] = { 0x1818, 0x00, 0x1000, 0x00 }, - [BAM_P_SW_OFSTS] = { 0x1800, 0x00, 0x1000, 0x00 }, - [BAM_P_DATA_FIFO_ADDR] = { 0x1824, 0x00, 0x1000, 0x00 }, - [BAM_P_DESC_FIFO_ADDR] = { 0x181C, 0x00, 0x1000, 0x00 }, - [BAM_P_EVNT_GEN_TRSHLD] = { 0x1828, 0x00, 0x1000, 0x00 }, - [BAM_P_FIFO_SIZES] = { 0x1820, 0x00, 0x1000, 0x00 }, -}; - -static const struct reg_offset_data bam_v1_7_reg_info[] = { - [BAM_CTRL] = { 0x00000, 0x00, 0x00, 0x00 }, - [BAM_REVISION] = { 0x01000, 0x00, 0x00, 0x00 }, - [BAM_NUM_PIPES] = { 0x01008, 0x00, 0x00, 0x00 }, - [BAM_DESC_CNT_TRSHLD] = { 0x00008, 0x00, 0x00, 0x00 }, - [BAM_IRQ_SRCS] = { 0x03010, 0x00, 0x00, 0x00 }, - [BAM_IRQ_SRCS_MSK] = { 0x03014, 0x00, 0x00, 0x00 }, - [BAM_IRQ_SRCS_UNMASKED] = { 0x03018, 0x00, 0x00, 0x00 }, - [BAM_IRQ_STTS] = { 0x00014, 0x00, 0x00, 0x00 }, - [BAM_IRQ_CLR] = { 0x00018, 0x00, 0x00, 0x00 }, - [BAM_IRQ_EN] = { 0x0001C, 0x00, 0x00, 0x00 }, - [BAM_CNFG_BITS] = { 0x0007C, 0x00, 0x00, 0x00 }, - [BAM_IRQ_SRCS_EE] = { 0x03000, 0x00, 0x00, 0x1000 }, - [BAM_IRQ_SRCS_MSK_EE] = { 0x03004, 0x00, 0x00, 0x1000 }, - [BAM_P_CTRL] = { 0x13000, 0x1000, 0x00, 0x00 }, - [BAM_P_RST] = { 0x13004, 0x1000, 0x00, 0x00 }, - [BAM_P_HALT] = { 0x13008, 0x1000, 0x00, 0x00 }, - [BAM_P_IRQ_STTS] = { 0x13010, 0x1000, 0x00, 0x00 }, - [BAM_P_IRQ_CLR] = { 0x13014, 0x1000, 0x00, 0x00 }, - [BAM_P_IRQ_EN] = { 0x13018, 0x1000, 0x00, 0x00 }, - [BAM_P_EVNT_DEST_ADDR] = { 0x1382C, 0x00, 0x1000, 0x00 }, - [BAM_P_EVNT_REG] = { 0x13818, 0x00, 0x1000, 0x00 }, - [BAM_P_SW_OFSTS] = { 0x13800, 0x00, 0x1000, 0x00 }, - [BAM_P_DATA_FIFO_ADDR] = { 0x13824, 0x00, 0x1000, 0x00 }, - [BAM_P_DESC_FIFO_ADDR] = { 0x1381C, 0x00, 0x1000, 0x00 }, - [BAM_P_EVNT_GEN_TRSHLD] = { 0x13828, 0x00, 0x1000, 0x00 }, - [BAM_P_FIFO_SIZES] = { 0x13820, 0x00, 0x1000, 0x00 }, -}; - -/* BAM CTRL */ -#define BAM_SW_RST BIT(0) -#define BAM_EN BIT(1) -#define BAM_EN_ACCUM BIT(4) -#define BAM_TESTBUS_SEL_SHIFT 5 -#define BAM_TESTBUS_SEL_MASK 0x3F -#define BAM_DESC_CACHE_SEL_SHIFT 13 -#define BAM_DESC_CACHE_SEL_MASK 0x3 -#define BAM_CACHED_DESC_STORE BIT(15) -#define IBC_DISABLE BIT(16) - -/* BAM REVISION */ -#define REVISION_SHIFT 0 -#define REVISION_MASK 0xFF -#define NUM_EES_SHIFT 8 -#define NUM_EES_MASK 0xF -#define CE_BUFFER_SIZE BIT(13) -#define AXI_ACTIVE BIT(14) -#define USE_VMIDMT BIT(15) -#define SECURED BIT(16) -#define BAM_HAS_NO_BYPASS BIT(17) -#define HIGH_FREQUENCY_BAM BIT(18) -#define INACTIV_TMRS_EXST BIT(19) -#define NUM_INACTIV_TMRS BIT(20) -#define DESC_CACHE_DEPTH_SHIFT 21 -#define DESC_CACHE_DEPTH_1 (0 << DESC_CACHE_DEPTH_SHIFT) -#define DESC_CACHE_DEPTH_2 (1 << DESC_CACHE_DEPTH_SHIFT) -#define DESC_CACHE_DEPTH_3 (2 << DESC_CACHE_DEPTH_SHIFT) -#define DESC_CACHE_DEPTH_4 (3 << DESC_CACHE_DEPTH_SHIFT) -#define CMD_DESC_EN BIT(23) -#define INACTIV_TMR_BASE_SHIFT 24 -#define INACTIV_TMR_BASE_MASK 0xFF - -/* BAM NUM PIPES */ -#define BAM_NUM_PIPES_SHIFT 0 -#define BAM_NUM_PIPES_MASK 0xFF -#define PERIPH_NON_PIPE_GRP_SHIFT 16 -#define PERIPH_NON_PIP_GRP_MASK 0xFF -#define BAM_NON_PIPE_GRP_SHIFT 24 -#define BAM_NON_PIPE_GRP_MASK 0xFF - -/* BAM CNFG BITS */ -#define BAM_PIPE_CNFG BIT(2) -#define BAM_FULL_PIPE BIT(11) -#define BAM_NO_EXT_P_RST BIT(12) -#define BAM_IBC_DISABLE BIT(13) -#define BAM_SB_CLK_REQ BIT(14) -#define BAM_PSM_CSW_REQ BIT(15) -#define BAM_PSM_P_RES BIT(16) -#define BAM_AU_P_RES BIT(17) -#define BAM_SI_P_RES BIT(18) -#define BAM_WB_P_RES BIT(19) -#define BAM_WB_BLK_CSW BIT(20) -#define BAM_WB_CSW_ACK_IDL BIT(21) -#define BAM_WB_RETR_SVPNT BIT(22) -#define BAM_WB_DSC_AVL_P_RST BIT(23) -#define BAM_REG_P_EN BIT(24) -#define BAM_PSM_P_HD_DATA BIT(25) -#define BAM_AU_ACCUMED BIT(26) -#define BAM_CMD_ENABLE BIT(27) - -#define BAM_CNFG_BITS_DEFAULT (BAM_PIPE_CNFG | \ - BAM_NO_EXT_P_RST | \ - BAM_IBC_DISABLE | \ - BAM_SB_CLK_REQ | \ - BAM_PSM_CSW_REQ | \ - BAM_PSM_P_RES | \ - BAM_AU_P_RES | \ - BAM_SI_P_RES | \ - BAM_WB_P_RES | \ - BAM_WB_BLK_CSW | \ - BAM_WB_CSW_ACK_IDL | \ - BAM_WB_RETR_SVPNT | \ - BAM_WB_DSC_AVL_P_RST | \ - BAM_REG_P_EN | \ - BAM_PSM_P_HD_DATA | \ - BAM_AU_ACCUMED | \ - BAM_CMD_ENABLE) - -/* PIPE CTRL */ -#define P_EN BIT(1) -#define P_DIRECTION BIT(3) -#define P_SYS_STRM BIT(4) -#define P_SYS_MODE BIT(5) -#define P_AUTO_EOB BIT(6) -#define P_AUTO_EOB_SEL_SHIFT 7 -#define P_AUTO_EOB_SEL_512 (0 << P_AUTO_EOB_SEL_SHIFT) -#define P_AUTO_EOB_SEL_256 (1 << P_AUTO_EOB_SEL_SHIFT) -#define P_AUTO_EOB_SEL_128 (2 << P_AUTO_EOB_SEL_SHIFT) -#define P_AUTO_EOB_SEL_64 (3 << P_AUTO_EOB_SEL_SHIFT) -#define P_PREFETCH_LIMIT_SHIFT 9 -#define P_PREFETCH_LIMIT_32 (0 << P_PREFETCH_LIMIT_SHIFT) -#define P_PREFETCH_LIMIT_16 (1 << P_PREFETCH_LIMIT_SHIFT) -#define P_PREFETCH_LIMIT_4 (2 << P_PREFETCH_LIMIT_SHIFT) -#define P_WRITE_NWD BIT(11) -#define P_LOCK_GROUP_SHIFT 16 -#define P_LOCK_GROUP_MASK 0x1F - -/* BAM_DESC_CNT_TRSHLD */ -#define CNT_TRSHLD 0xffff -#define DEFAULT_CNT_THRSHLD 0x4 - -/* BAM_IRQ_SRCS */ -#define BAM_IRQ BIT(31) -#define P_IRQ 0x7fffffff - -/* BAM_IRQ_SRCS_MSK */ -#define BAM_IRQ_MSK BAM_IRQ -#define P_IRQ_MSK P_IRQ - -/* BAM_IRQ_STTS */ -#define BAM_TIMER_IRQ BIT(4) -#define BAM_EMPTY_IRQ BIT(3) -#define BAM_ERROR_IRQ BIT(2) -#define BAM_HRESP_ERR_IRQ BIT(1) - -/* BAM_IRQ_CLR */ -#define BAM_TIMER_CLR BIT(4) -#define BAM_EMPTY_CLR BIT(3) -#define BAM_ERROR_CLR BIT(2) -#define BAM_HRESP_ERR_CLR BIT(1) - -/* BAM_IRQ_EN */ -#define BAM_TIMER_EN BIT(4) -#define BAM_EMPTY_EN BIT(3) -#define BAM_ERROR_EN BIT(2) -#define BAM_HRESP_ERR_EN BIT(1) - -/* BAM_P_IRQ_EN */ -#define P_PRCSD_DESC_EN BIT(0) -#define P_TIMER_EN BIT(1) -#define P_WAKE_EN BIT(2) -#define P_OUT_OF_DESC_EN BIT(3) -#define P_ERR_EN BIT(4) -#define P_TRNSFR_END_EN BIT(5) -#define P_DEFAULT_IRQS_EN (P_PRCSD_DESC_EN | P_ERR_EN | P_TRNSFR_END_EN) - -/* BAM_P_SW_OFSTS */ -#define P_SW_OFSTS_MASK 0xffff - -#define BAM_DESC_FIFO_SIZE SZ_32K -#define MAX_DESCRIPTORS (BAM_DESC_FIFO_SIZE / sizeof(struct bam_desc_hw) - 1) -#define BAM_MAX_DATA_SIZE (SZ_32K - 8) - -struct bam_chan { - struct virt_dma_chan vc; - - struct bam_device *bdev; - - /* configuration from device tree */ - u32 id; - - struct bam_async_desc *curr_txd; /* current running dma */ - - /* runtime configuration */ - struct dma_slave_config slave; - - /* fifo storage */ - struct bam_desc_hw *fifo_virt; - dma_addr_t fifo_phys; - - /* fifo markers */ - unsigned short head; /* start of active descriptor entries */ - unsigned short tail; /* end of active descriptor entries */ - - unsigned int initialized; /* is the channel hw initialized? */ - unsigned int paused; /* is the channel paused? */ - unsigned int reconfigure; /* new slave config? */ - - struct list_head node; -}; - -static inline struct bam_chan *to_bam_chan(struct dma_chan *common) -{ - return container_of(common, struct bam_chan, vc.chan); -} - -struct bam_device { - void __iomem *regs; - struct device *dev; - struct dma_device common; - struct device_dma_parameters dma_parms; - struct bam_chan *channels; - u32 num_channels; - - /* execution environment ID, from DT */ - u32 ee; - - const struct reg_offset_data *layout; - - struct clk *bamclk; - int irq; - - /* dma start transaction tasklet */ - struct tasklet_struct task; -}; - -/** - * bam_addr - returns BAM register address - * @bdev: bam device - * @pipe: pipe instance (ignored when register doesn't have multiple instances) - * @reg: register enum - */ -static inline void __iomem *bam_addr(struct bam_device *bdev, u32 pipe, - enum bam_reg reg) -{ - const struct reg_offset_data r = bdev->layout[reg]; - - return bdev->regs + r.base_offset + - r.pipe_mult * pipe + - r.evnt_mult * pipe + - r.ee_mult * bdev->ee; -} - -/** - * bam_reset_channel - Reset individual BAM DMA channel - * @bchan: bam channel - * - * This function resets a specific BAM channel - */ -static void bam_reset_channel(struct bam_chan *bchan) -{ - struct bam_device *bdev = bchan->bdev; - - lockdep_assert_held(&bchan->vc.lock); - - /* reset channel */ - writel_relaxed(1, bam_addr(bdev, bchan->id, BAM_P_RST)); - writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_RST)); - - /* don't allow cpu to reorder BAM register accesses done after this */ - wmb(); - - /* make sure hw is initialized when channel is used the first time */ - bchan->initialized = 0; -} - -/** - * bam_chan_init_hw - Initialize channel hardware - * @bchan: bam channel - * - * This function resets and initializes the BAM channel - */ -static void bam_chan_init_hw(struct bam_chan *bchan, - enum dma_transfer_direction dir) -{ - struct bam_device *bdev = bchan->bdev; - u32 val; - - /* Reset the channel to clear internal state of the FIFO */ - bam_reset_channel(bchan); - - /* - * write out 8 byte aligned address. We have enough space for this - * because we allocated 1 more descriptor (8 bytes) than we can use - */ - writel_relaxed(ALIGN(bchan->fifo_phys, sizeof(struct bam_desc_hw)), - bam_addr(bdev, bchan->id, BAM_P_DESC_FIFO_ADDR)); - writel_relaxed(BAM_DESC_FIFO_SIZE, - bam_addr(bdev, bchan->id, BAM_P_FIFO_SIZES)); - - /* enable the per pipe interrupts, enable EOT, ERR, and INT irqs */ - writel_relaxed(P_DEFAULT_IRQS_EN, - bam_addr(bdev, bchan->id, BAM_P_IRQ_EN)); - - /* unmask the specific pipe and EE combo */ - val = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); - val |= BIT(bchan->id); - writel_relaxed(val, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); - - /* don't allow cpu to reorder the channel enable done below */ - wmb(); - - /* set fixed direction and mode, then enable channel */ - val = P_EN | P_SYS_MODE; - if (dir == DMA_DEV_TO_MEM) - val |= P_DIRECTION; - - writel_relaxed(val, bam_addr(bdev, bchan->id, BAM_P_CTRL)); - - bchan->initialized = 1; - - /* init FIFO pointers */ - bchan->head = 0; - bchan->tail = 0; -} - -/** - * bam_alloc_chan - Allocate channel resources for DMA channel. - * @chan: specified channel - * - * This function allocates the FIFO descriptor memory - */ -static int bam_alloc_chan(struct dma_chan *chan) -{ - struct bam_chan *bchan = to_bam_chan(chan); - struct bam_device *bdev = bchan->bdev; - - if (bchan->fifo_virt) - return 0; - - /* allocate FIFO descriptor space, but only if necessary */ - bchan->fifo_virt = dma_alloc_writecombine(bdev->dev, BAM_DESC_FIFO_SIZE, - &bchan->fifo_phys, GFP_KERNEL); - - if (!bchan->fifo_virt) { - dev_err(bdev->dev, "Failed to allocate desc fifo\n"); - return -ENOMEM; - } - - return 0; -} - -/** - * bam_free_chan - Frees dma resources associated with specific channel - * @chan: specified channel - * - * Free the allocated fifo descriptor memory and channel resources - * - */ -static void bam_free_chan(struct dma_chan *chan) -{ - struct bam_chan *bchan = to_bam_chan(chan); - struct bam_device *bdev = bchan->bdev; - u32 val; - unsigned long flags; - - vchan_free_chan_resources(to_virt_chan(chan)); - - if (bchan->curr_txd) { - dev_err(bchan->bdev->dev, "Cannot free busy channel\n"); - return; - } - - spin_lock_irqsave(&bchan->vc.lock, flags); - bam_reset_channel(bchan); - spin_unlock_irqrestore(&bchan->vc.lock, flags); - - dma_free_writecombine(bdev->dev, BAM_DESC_FIFO_SIZE, bchan->fifo_virt, - bchan->fifo_phys); - bchan->fifo_virt = NULL; - - /* mask irq for pipe/channel */ - val = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); - val &= ~BIT(bchan->id); - writel_relaxed(val, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); - - /* disable irq */ - writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_IRQ_EN)); -} - -/** - * bam_slave_config - set slave configuration for channel - * @chan: dma channel - * @cfg: slave configuration - * - * Sets slave configuration for channel - * - */ -static int bam_slave_config(struct dma_chan *chan, - struct dma_slave_config *cfg) -{ - struct bam_chan *bchan = to_bam_chan(chan); - unsigned long flag; - - spin_lock_irqsave(&bchan->vc.lock, flag); - memcpy(&bchan->slave, cfg, sizeof(*cfg)); - bchan->reconfigure = 1; - spin_unlock_irqrestore(&bchan->vc.lock, flag); - - return 0; -} - -/** - * bam_prep_slave_sg - Prep slave sg transaction - * - * @chan: dma channel - * @sgl: scatter gather list - * @sg_len: length of sg - * @direction: DMA transfer direction - * @flags: DMA flags - * @context: transfer context (unused) - */ -static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan, - struct scatterlist *sgl, unsigned int sg_len, - enum dma_transfer_direction direction, unsigned long flags, - void *context) -{ - struct bam_chan *bchan = to_bam_chan(chan); - struct bam_device *bdev = bchan->bdev; - struct bam_async_desc *async_desc; - struct scatterlist *sg; - u32 i; - struct bam_desc_hw *desc; - unsigned int num_alloc = 0; - - - if (!is_slave_direction(direction)) { - dev_err(bdev->dev, "invalid dma direction\n"); - return NULL; - } - - /* calculate number of required entries */ - for_each_sg(sgl, sg, sg_len, i) - num_alloc += DIV_ROUND_UP(sg_dma_len(sg), BAM_MAX_DATA_SIZE); - - /* allocate enough room to accomodate the number of entries */ - async_desc = kzalloc(sizeof(*async_desc) + - (num_alloc * sizeof(struct bam_desc_hw)), GFP_NOWAIT); - - if (!async_desc) - goto err_out; - - if (flags & DMA_PREP_FENCE) - async_desc->flags |= DESC_FLAG_NWD; - - if (flags & DMA_PREP_INTERRUPT) - async_desc->flags |= DESC_FLAG_EOT; - else - async_desc->flags |= DESC_FLAG_INT; - - async_desc->num_desc = num_alloc; - async_desc->curr_desc = async_desc->desc; - async_desc->dir = direction; - - /* fill in temporary descriptors */ - desc = async_desc->desc; - for_each_sg(sgl, sg, sg_len, i) { - unsigned int remainder = sg_dma_len(sg); - unsigned int curr_offset = 0; - - do { - desc->addr = sg_dma_address(sg) + curr_offset; - - if (remainder > BAM_MAX_DATA_SIZE) { - desc->size = BAM_MAX_DATA_SIZE; - remainder -= BAM_MAX_DATA_SIZE; - curr_offset += BAM_MAX_DATA_SIZE; - } else { - desc->size = remainder; - remainder = 0; - } - - async_desc->length += desc->size; - desc++; - } while (remainder > 0); - } - - return vchan_tx_prep(&bchan->vc, &async_desc->vd, flags); - -err_out: - kfree(async_desc); - return NULL; -} - -/** - * bam_dma_terminate_all - terminate all transactions on a channel - * @bchan: bam dma channel - * - * Dequeues and frees all transactions - * No callbacks are done - * - */ -static int bam_dma_terminate_all(struct dma_chan *chan) -{ - struct bam_chan *bchan = to_bam_chan(chan); - unsigned long flag; - LIST_HEAD(head); - - /* remove all transactions, including active transaction */ - spin_lock_irqsave(&bchan->vc.lock, flag); - if (bchan->curr_txd) { - list_add(&bchan->curr_txd->vd.node, &bchan->vc.desc_issued); - bchan->curr_txd = NULL; - } - - vchan_get_all_descriptors(&bchan->vc, &head); - spin_unlock_irqrestore(&bchan->vc.lock, flag); - - vchan_dma_desc_free_list(&bchan->vc, &head); - - return 0; -} - -/** - * bam_pause - Pause DMA channel - * @chan: dma channel - * - */ -static int bam_pause(struct dma_chan *chan) -{ - struct bam_chan *bchan = to_bam_chan(chan); - struct bam_device *bdev = bchan->bdev; - unsigned long flag; - - spin_lock_irqsave(&bchan->vc.lock, flag); - writel_relaxed(1, bam_addr(bdev, bchan->id, BAM_P_HALT)); - bchan->paused = 1; - spin_unlock_irqrestore(&bchan->vc.lock, flag); - - return 0; -} - -/** - * bam_resume - Resume DMA channel operations - * @chan: dma channel - * - */ -static int bam_resume(struct dma_chan *chan) -{ - struct bam_chan *bchan = to_bam_chan(chan); - struct bam_device *bdev = bchan->bdev; - unsigned long flag; - - spin_lock_irqsave(&bchan->vc.lock, flag); - writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_HALT)); - bchan->paused = 0; - spin_unlock_irqrestore(&bchan->vc.lock, flag); - - return 0; -} - -/** - * process_channel_irqs - processes the channel interrupts - * @bdev: bam controller - * - * This function processes the channel interrupts - * - */ -static u32 process_channel_irqs(struct bam_device *bdev) -{ - u32 i, srcs, pipe_stts; - unsigned long flags; - struct bam_async_desc *async_desc; - - srcs = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_EE)); - - /* return early if no pipe/channel interrupts are present */ - if (!(srcs & P_IRQ)) - return srcs; - - for (i = 0; i < bdev->num_channels; i++) { - struct bam_chan *bchan = &bdev->channels[i]; - - if (!(srcs & BIT(i))) - continue; - - /* clear pipe irq */ - pipe_stts = readl_relaxed(bam_addr(bdev, i, BAM_P_IRQ_STTS)); - - writel_relaxed(pipe_stts, bam_addr(bdev, i, BAM_P_IRQ_CLR)); - - spin_lock_irqsave(&bchan->vc.lock, flags); - async_desc = bchan->curr_txd; - - if (async_desc) { - async_desc->num_desc -= async_desc->xfer_len; - async_desc->curr_desc += async_desc->xfer_len; - bchan->curr_txd = NULL; - - /* manage FIFO */ - bchan->head += async_desc->xfer_len; - bchan->head %= MAX_DESCRIPTORS; - - /* - * if complete, process cookie. Otherwise - * push back to front of desc_issued so that - * it gets restarted by the tasklet - */ - if (!async_desc->num_desc) - vchan_cookie_complete(&async_desc->vd); - else - list_add(&async_desc->vd.node, - &bchan->vc.desc_issued); - } - - spin_unlock_irqrestore(&bchan->vc.lock, flags); - } - - return srcs; -} - -/** - * bam_dma_irq - irq handler for bam controller - * @irq: IRQ of interrupt - * @data: callback data - * - * IRQ handler for the bam controller - */ -static irqreturn_t bam_dma_irq(int irq, void *data) -{ - struct bam_device *bdev = data; - u32 clr_mask = 0, srcs = 0; - - srcs |= process_channel_irqs(bdev); - - /* kick off tasklet to start next dma transfer */ - if (srcs & P_IRQ) - tasklet_schedule(&bdev->task); - - if (srcs & BAM_IRQ) - clr_mask = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_STTS)); - - /* don't allow reorder of the various accesses to the BAM registers */ - mb(); - - writel_relaxed(clr_mask, bam_addr(bdev, 0, BAM_IRQ_CLR)); - - return IRQ_HANDLED; -} - -/** - * bam_tx_status - returns status of transaction - * @chan: dma channel - * @cookie: transaction cookie - * @txstate: DMA transaction state - * - * Return status of dma transaction - */ -static enum dma_status bam_tx_status(struct dma_chan *chan, dma_cookie_t cookie, - struct dma_tx_state *txstate) -{ - struct bam_chan *bchan = to_bam_chan(chan); - struct virt_dma_desc *vd; - int ret; - size_t residue = 0; - unsigned int i; - unsigned long flags; - - ret = dma_cookie_status(chan, cookie, txstate); - if (ret == DMA_COMPLETE) - return ret; - - if (!txstate) - return bchan->paused ? DMA_PAUSED : ret; - - spin_lock_irqsave(&bchan->vc.lock, flags); - vd = vchan_find_desc(&bchan->vc, cookie); - if (vd) - residue = container_of(vd, struct bam_async_desc, vd)->length; - else if (bchan->curr_txd && bchan->curr_txd->vd.tx.cookie == cookie) - for (i = 0; i < bchan->curr_txd->num_desc; i++) - residue += bchan->curr_txd->curr_desc[i].size; - - spin_unlock_irqrestore(&bchan->vc.lock, flags); - - dma_set_residue(txstate, residue); - - if (ret == DMA_IN_PROGRESS && bchan->paused) - ret = DMA_PAUSED; - - return ret; -} - -/** - * bam_apply_new_config - * @bchan: bam dma channel - * @dir: DMA direction - */ -static void bam_apply_new_config(struct bam_chan *bchan, - enum dma_transfer_direction dir) -{ - struct bam_device *bdev = bchan->bdev; - u32 maxburst; - - if (dir == DMA_DEV_TO_MEM) - maxburst = bchan->slave.src_maxburst; - else - maxburst = bchan->slave.dst_maxburst; - - writel_relaxed(maxburst, bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD)); - - bchan->reconfigure = 0; -} - -/** - * bam_start_dma - start next transaction - * @bchan - bam dma channel - */ -static void bam_start_dma(struct bam_chan *bchan) -{ - struct virt_dma_desc *vd = vchan_next_desc(&bchan->vc); - struct bam_device *bdev = bchan->bdev; - struct bam_async_desc *async_desc; - struct bam_desc_hw *desc; - struct bam_desc_hw *fifo = PTR_ALIGN(bchan->fifo_virt, - sizeof(struct bam_desc_hw)); - - lockdep_assert_held(&bchan->vc.lock); - - if (!vd) - return; - - list_del(&vd->node); - - async_desc = container_of(vd, struct bam_async_desc, vd); - bchan->curr_txd = async_desc; - - /* on first use, initialize the channel hardware */ - if (!bchan->initialized) - bam_chan_init_hw(bchan, async_desc->dir); - - /* apply new slave config changes, if necessary */ - if (bchan->reconfigure) - bam_apply_new_config(bchan, async_desc->dir); - - desc = bchan->curr_txd->curr_desc; - - if (async_desc->num_desc > MAX_DESCRIPTORS) - async_desc->xfer_len = MAX_DESCRIPTORS; - else - async_desc->xfer_len = async_desc->num_desc; - - /* set any special flags on the last descriptor */ - if (async_desc->num_desc == async_desc->xfer_len) - desc[async_desc->xfer_len - 1].flags = async_desc->flags; - else - desc[async_desc->xfer_len - 1].flags |= DESC_FLAG_INT; - - if (bchan->tail + async_desc->xfer_len > MAX_DESCRIPTORS) { - u32 partial = MAX_DESCRIPTORS - bchan->tail; - - memcpy(&fifo[bchan->tail], desc, - partial * sizeof(struct bam_desc_hw)); - memcpy(fifo, &desc[partial], (async_desc->xfer_len - partial) * - sizeof(struct bam_desc_hw)); - } else { - memcpy(&fifo[bchan->tail], desc, - async_desc->xfer_len * sizeof(struct bam_desc_hw)); - } - - bchan->tail += async_desc->xfer_len; - bchan->tail %= MAX_DESCRIPTORS; - - /* ensure descriptor writes and dma start not reordered */ - wmb(); - writel_relaxed(bchan->tail * sizeof(struct bam_desc_hw), - bam_addr(bdev, bchan->id, BAM_P_EVNT_REG)); -} - -/** - * dma_tasklet - DMA IRQ tasklet - * @data: tasklet argument (bam controller structure) - * - * Sets up next DMA operation and then processes all completed transactions - */ -static void dma_tasklet(unsigned long data) -{ - struct bam_device *bdev = (struct bam_device *)data; - struct bam_chan *bchan; - unsigned long flags; - unsigned int i; - - /* go through the channels and kick off transactions */ - for (i = 0; i < bdev->num_channels; i++) { - bchan = &bdev->channels[i]; - spin_lock_irqsave(&bchan->vc.lock, flags); - - if (!list_empty(&bchan->vc.desc_issued) && !bchan->curr_txd) - bam_start_dma(bchan); - spin_unlock_irqrestore(&bchan->vc.lock, flags); - } -} - -/** - * bam_issue_pending - starts pending transactions - * @chan: dma channel - * - * Calls tasklet directly which in turn starts any pending transactions - */ -static void bam_issue_pending(struct dma_chan *chan) -{ - struct bam_chan *bchan = to_bam_chan(chan); - unsigned long flags; - - spin_lock_irqsave(&bchan->vc.lock, flags); - - /* if work pending and idle, start a transaction */ - if (vchan_issue_pending(&bchan->vc) && !bchan->curr_txd) - bam_start_dma(bchan); - - spin_unlock_irqrestore(&bchan->vc.lock, flags); -} - -/** - * bam_dma_free_desc - free descriptor memory - * @vd: virtual descriptor - * - */ -static void bam_dma_free_desc(struct virt_dma_desc *vd) -{ - struct bam_async_desc *async_desc = container_of(vd, - struct bam_async_desc, vd); - - kfree(async_desc); -} - -static struct dma_chan *bam_dma_xlate(struct of_phandle_args *dma_spec, - struct of_dma *of) -{ - struct bam_device *bdev = container_of(of->of_dma_data, - struct bam_device, common); - unsigned int request; - - if (dma_spec->args_count != 1) - return NULL; - - request = dma_spec->args[0]; - if (request >= bdev->num_channels) - return NULL; - - return dma_get_slave_channel(&(bdev->channels[request].vc.chan)); -} - -/** - * bam_init - * @bdev: bam device - * - * Initialization helper for global bam registers - */ -static int bam_init(struct bam_device *bdev) -{ - u32 val; - - /* read revision and configuration information */ - val = readl_relaxed(bam_addr(bdev, 0, BAM_REVISION)) >> NUM_EES_SHIFT; - val &= NUM_EES_MASK; - - /* check that configured EE is within range */ - if (bdev->ee >= val) - return -EINVAL; - - val = readl_relaxed(bam_addr(bdev, 0, BAM_NUM_PIPES)); - bdev->num_channels = val & BAM_NUM_PIPES_MASK; - - /* s/w reset bam */ - /* after reset all pipes are disabled and idle */ - val = readl_relaxed(bam_addr(bdev, 0, BAM_CTRL)); - val |= BAM_SW_RST; - writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); - val &= ~BAM_SW_RST; - writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); - - /* make sure previous stores are visible before enabling BAM */ - wmb(); - - /* enable bam */ - val |= BAM_EN; - writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); - - /* set descriptor threshhold, start with 4 bytes */ - writel_relaxed(DEFAULT_CNT_THRSHLD, - bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD)); - - /* Enable default set of h/w workarounds, ie all except BAM_FULL_PIPE */ - writel_relaxed(BAM_CNFG_BITS_DEFAULT, bam_addr(bdev, 0, BAM_CNFG_BITS)); - - /* enable irqs for errors */ - writel_relaxed(BAM_ERROR_EN | BAM_HRESP_ERR_EN, - bam_addr(bdev, 0, BAM_IRQ_EN)); - - /* unmask global bam interrupt */ - writel_relaxed(BAM_IRQ_MSK, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); - - return 0; -} - -static void bam_channel_init(struct bam_device *bdev, struct bam_chan *bchan, - u32 index) -{ - bchan->id = index; - bchan->bdev = bdev; - - vchan_init(&bchan->vc, &bdev->common); - bchan->vc.desc_free = bam_dma_free_desc; -} - -static const struct of_device_id bam_of_match[] = { - { .compatible = "qcom,bam-v1.3.0", .data = &bam_v1_3_reg_info }, - { .compatible = "qcom,bam-v1.4.0", .data = &bam_v1_4_reg_info }, - { .compatible = "qcom,bam-v1.7.0", .data = &bam_v1_7_reg_info }, - {} -}; - -MODULE_DEVICE_TABLE(of, bam_of_match); - -static int bam_dma_probe(struct platform_device *pdev) -{ - struct bam_device *bdev; - const struct of_device_id *match; - struct resource *iores; - int ret, i; - - bdev = devm_kzalloc(&pdev->dev, sizeof(*bdev), GFP_KERNEL); - if (!bdev) - return -ENOMEM; - - bdev->dev = &pdev->dev; - - match = of_match_node(bam_of_match, pdev->dev.of_node); - if (!match) { - dev_err(&pdev->dev, "Unsupported BAM module\n"); - return -ENODEV; - } - - bdev->layout = match->data; - - iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); - bdev->regs = devm_ioremap_resource(&pdev->dev, iores); - if (IS_ERR(bdev->regs)) - return PTR_ERR(bdev->regs); - - bdev->irq = platform_get_irq(pdev, 0); - if (bdev->irq < 0) - return bdev->irq; - - ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &bdev->ee); - if (ret) { - dev_err(bdev->dev, "Execution environment unspecified\n"); - return ret; - } - - bdev->bamclk = devm_clk_get(bdev->dev, "bam_clk"); - if (IS_ERR(bdev->bamclk)) - return PTR_ERR(bdev->bamclk); - - ret = clk_prepare_enable(bdev->bamclk); - if (ret) { - dev_err(bdev->dev, "failed to prepare/enable clock\n"); - return ret; - } - - ret = bam_init(bdev); - if (ret) - goto err_disable_clk; - - tasklet_init(&bdev->task, dma_tasklet, (unsigned long)bdev); - - bdev->channels = devm_kcalloc(bdev->dev, bdev->num_channels, - sizeof(*bdev->channels), GFP_KERNEL); - - if (!bdev->channels) { - ret = -ENOMEM; - goto err_tasklet_kill; - } - - /* allocate and initialize channels */ - INIT_LIST_HEAD(&bdev->common.channels); - - for (i = 0; i < bdev->num_channels; i++) - bam_channel_init(bdev, &bdev->channels[i], i); - - ret = devm_request_irq(bdev->dev, bdev->irq, bam_dma_irq, - IRQF_TRIGGER_HIGH, "bam_dma", bdev); - if (ret) - goto err_bam_channel_exit; - - /* set max dma segment size */ - bdev->common.dev = bdev->dev; - bdev->common.dev->dma_parms = &bdev->dma_parms; - ret = dma_set_max_seg_size(bdev->common.dev, BAM_MAX_DATA_SIZE); - if (ret) { - dev_err(bdev->dev, "cannot set maximum segment size\n"); - goto err_bam_channel_exit; - } - - platform_set_drvdata(pdev, bdev); - - /* set capabilities */ - dma_cap_zero(bdev->common.cap_mask); - dma_cap_set(DMA_SLAVE, bdev->common.cap_mask); - - /* initialize dmaengine apis */ - bdev->common.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); - bdev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT; - bdev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; - bdev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; - bdev->common.device_alloc_chan_resources = bam_alloc_chan; - bdev->common.device_free_chan_resources = bam_free_chan; - bdev->common.device_prep_slave_sg = bam_prep_slave_sg; - bdev->common.device_config = bam_slave_config; - bdev->common.device_pause = bam_pause; - bdev->common.device_resume = bam_resume; - bdev->common.device_terminate_all = bam_dma_terminate_all; - bdev->common.device_issue_pending = bam_issue_pending; - bdev->common.device_tx_status = bam_tx_status; - bdev->common.dev = bdev->dev; - - ret = dma_async_device_register(&bdev->common); - if (ret) { - dev_err(bdev->dev, "failed to register dma async device\n"); - goto err_bam_channel_exit; - } - - ret = of_dma_controller_register(pdev->dev.of_node, bam_dma_xlate, - &bdev->common); - if (ret) - goto err_unregister_dma; - - return 0; - -err_unregister_dma: - dma_async_device_unregister(&bdev->common); -err_bam_channel_exit: - for (i = 0; i < bdev->num_channels; i++) - tasklet_kill(&bdev->channels[i].vc.task); -err_tasklet_kill: - tasklet_kill(&bdev->task); -err_disable_clk: - clk_disable_unprepare(bdev->bamclk); - - return ret; -} - -static int bam_dma_remove(struct platform_device *pdev) -{ - struct bam_device *bdev = platform_get_drvdata(pdev); - u32 i; - - of_dma_controller_free(pdev->dev.of_node); - dma_async_device_unregister(&bdev->common); - - /* mask all interrupts for this execution environment */ - writel_relaxed(0, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE)); - - devm_free_irq(bdev->dev, bdev->irq, bdev); - - for (i = 0; i < bdev->num_channels; i++) { - bam_dma_terminate_all(&bdev->channels[i].vc.chan); - tasklet_kill(&bdev->channels[i].vc.task); - - dma_free_writecombine(bdev->dev, BAM_DESC_FIFO_SIZE, - bdev->channels[i].fifo_virt, - bdev->channels[i].fifo_phys); - } - - tasklet_kill(&bdev->task); - - clk_disable_unprepare(bdev->bamclk); - - return 0; -} - -static struct platform_driver bam_dma_driver = { - .probe = bam_dma_probe, - .remove = bam_dma_remove, - .driver = { - .name = "bam-dma-engine", - .of_match_table = bam_of_match, - }, -}; - -module_platform_driver(bam_dma_driver); - -MODULE_AUTHOR("Andy Gross "); -MODULE_DESCRIPTION("QCOM BAM DMA engine driver"); -MODULE_LICENSE("GPL v2");