| Message ID | 1447670791-7874-1-git-send-email-jszhang@marvell.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 16.11.2015 11:46, Jisheng Zhang wrote: > The default interrupt-parent has been set in the upper layer, apb@e80000 > and apb@fc0000 for example. So if the interrupt-parent isn't changed, we > don't need to set it again. This patch removes the dumplicated > interrupt-parent settings. > > Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Applied to berlin64/dt. Thanks! > --- > arch/arm/boot/dts/berlin2q.dtsi | 6 ------ > 1 file changed, 6 deletions(-) > > diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi > index 8ea177f..155430a 100644 > --- a/arch/arm/boot/dts/berlin2q.dtsi > +++ b/arch/arm/boot/dts/berlin2q.dtsi > @@ -309,7 +309,6 @@ > #address-cells = <1>; > #size-cells = <0>; > reg = <0x1400 0x100>; > - interrupt-parent = <&aic>; > interrupts = <4>; > clocks = <&chip_clk CLKID_CFG>; > pinctrl-0 = <&twsi0_pmux>; > @@ -322,7 +321,6 @@ > #address-cells = <1>; > #size-cells = <0>; > reg = <0x1800 0x100>; > - interrupt-parent = <&aic>; > interrupts = <5>; > clocks = <&chip_clk CLKID_CFG>; > pinctrl-0 = <&twsi1_pmux>; > @@ -528,7 +526,6 @@ > #address-cells = <1>; > #size-cells = <0>; > reg = <0x7000 0x100>; > - interrupt-parent = <&sic>; > interrupts = <6>; > clocks = <&refclk>; > pinctrl-0 = <&twsi2_pmux>; > @@ -541,7 +538,6 @@ > #address-cells = <1>; > #size-cells = <0>; > reg = <0x8000 0x100>; > - interrupt-parent = <&sic>; > interrupts = <7>; > clocks = <&refclk>; > pinctrl-0 = <&twsi3_pmux>; > @@ -552,7 +548,6 @@ > uart0: uart@9000 { > compatible = "snps,dw-apb-uart"; > reg = <0x9000 0x100>; > - interrupt-parent = <&sic>; > interrupts = <8>; > clocks = <&refclk>; > reg-shift = <2>; > @@ -564,7 +559,6 @@ > uart1: uart@a000 { > compatible = "snps,dw-apb-uart"; > reg = <0xa000 0x100>; > - interrupt-parent = <&sic>; > interrupts = <9>; > clocks = <&refclk>; > reg-shift = <2>; >
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 8ea177f..155430a 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -309,7 +309,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x1400 0x100>; - interrupt-parent = <&aic>; interrupts = <4>; clocks = <&chip_clk CLKID_CFG>; pinctrl-0 = <&twsi0_pmux>; @@ -322,7 +321,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x1800 0x100>; - interrupt-parent = <&aic>; interrupts = <5>; clocks = <&chip_clk CLKID_CFG>; pinctrl-0 = <&twsi1_pmux>; @@ -528,7 +526,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x7000 0x100>; - interrupt-parent = <&sic>; interrupts = <6>; clocks = <&refclk>; pinctrl-0 = <&twsi2_pmux>; @@ -541,7 +538,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x8000 0x100>; - interrupt-parent = <&sic>; interrupts = <7>; clocks = <&refclk>; pinctrl-0 = <&twsi3_pmux>; @@ -552,7 +548,6 @@ uart0: uart@9000 { compatible = "snps,dw-apb-uart"; reg = <0x9000 0x100>; - interrupt-parent = <&sic>; interrupts = <8>; clocks = <&refclk>; reg-shift = <2>; @@ -564,7 +559,6 @@ uart1: uart@a000 { compatible = "snps,dw-apb-uart"; reg = <0xa000 0x100>; - interrupt-parent = <&sic>; interrupts = <9>; clocks = <&refclk>; reg-shift = <2>;
The default interrupt-parent has been set in the upper layer, apb@e80000 and apb@fc0000 for example. So if the interrupt-parent isn't changed, we don't need to set it again. This patch removes the dumplicated interrupt-parent settings. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> --- arch/arm/boot/dts/berlin2q.dtsi | 6 ------ 1 file changed, 6 deletions(-)