From patchwork Tue Nov 17 08:24:15 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Heiko Schocher X-Patchwork-Id: 7633871 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 1C016BF90C for ; Tue, 17 Nov 2015 08:27:08 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 89F862047D for ; Tue, 17 Nov 2015 08:27:06 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id E46692047C for ; Tue, 17 Nov 2015 08:27:04 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZybZU-00074I-2Z; Tue, 17 Nov 2015 08:25:00 +0000 Received: from mail-out.m-online.net ([2001:a60:0:28:0:1:25:1]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZybZP-0006kj-6K for linux-arm-kernel@lists.infradead.org; Tue, 17 Nov 2015 08:24:57 +0000 Received: from frontend02.mail.m-online.net (unknown [192.168.8.183]) by mail-out.m-online.net (Postfix) with ESMTP id 3p0L0Y2LvVz3hpZC; Tue, 17 Nov 2015 09:24:29 +0100 (CET) Received: from localhost (dynscan2.mnet-online.de [192.168.6.69]) by mail.m-online.net (Postfix) with ESMTP id 3p0L0X5WfHzvdWt; Tue, 17 Nov 2015 09:24:28 +0100 (CET) X-Virus-Scanned: amavisd-new at mnet-online.de Received: from mail.mnet-online.de ([192.168.8.184]) by localhost (dynscan2.mail.m-online.net [192.168.6.69]) (amavisd-new, port 10024) with ESMTP id jHkZnQx2Yn11; Tue, 17 Nov 2015 09:24:26 +0100 (CET) X-Auth-Info: UcmireJbmd9XiCyRfK6S77gBzjvPEORGb4Ng+c+8Uy4= Received: from mail-internal.denx.de (host-82-135-33-74.customer.m-online.net [82.135.33.74]) by smtp-auth.mnet-online.de (Postfix) with ESMTPA; Tue, 17 Nov 2015 09:24:26 +0100 (CET) Received: from pollux.denx.de (pollux [192.168.1.1]) by mail-internal.denx.de (Postfix) with ESMTP id 13E3934348E; Tue, 17 Nov 2015 09:24:26 +0100 (CET) Received: by pollux.denx.de (Postfix, from userid 515) id B04F8CE72; Tue, 17 Nov 2015 09:24:25 +0100 (CET) From: Heiko Schocher To: linux-kernel@vger.kernel.org Subject: [PATCH v2] arm, am335x: add support for the bosch shc board Date: Tue, 17 Nov 2015 09:24:15 +0100 Message-Id: <1447748655-2088-1-git-send-email-hs@denx.de> X-Mailer: git-send-email 2.1.0 MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20151117_002455_613565_0A052167 X-CRM114-Status: GOOD ( 17.67 ) X-Spam-Score: -2.6 (--) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, linux-omap@vger.kernel.org, Dave Gerlach , Tony Lindgren , Georg.Soffel@bosch-si.com, =?UTF-8?q?Beno=C3=AEt=20Cousson?= , Heiko Schocher , Robert Nelson , linux-arm-kernel@lists.infradead.org Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Spam-Status: No, score=-4.8 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_MED, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP add support for the am335x based shc board. UART: 0-2 and 4 DRAM: 512 MiB MMC: OMAP SD/MMC: 0 @ 26 MHz OMAP SD/MMC: 1 @ 26 MHz I2C: at24 eeprom, pcf8563 USB: USB1 (host) Signed-off-by: Heiko Schocher --- The following patches are needed to get all working for the shc board: - disable clkout on pcf8563 accepted. http://www.spinics.net/lists/devicetree/msg98542.html - leds: leds-gpio: add shutdown function accepted. https://lkml.org/lkml/2015/10/13/169 - net: phy: smsc: disable energy detect mode accepted [PATCH v2 2/2] net: phy: smsc: disable energy detect mode https://lkml.org/lkml/2015/10/17/2 [PATCH v2 1/2] drivers: net: cpsw: add phy-handle parsing https://lkml.org/lkml/2015/10/17/4 - ARM: OMAP2+: omap_hwmod: Introduce ti,no-init dt property http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/328204.html @Dave: What is the current state of this patch? I have the same problem here on this am335x based board - [PATCH v2] regulator: tps65217: remove tps65217.dtsi file http://www.kernelhub.org/?msg=868907&p=2 - bootlog and automated tests: http://xeidos.ddns.net/buildbot/waterfall Changes in v2: - Use IOPAD pinmux macro as Robert Nelson suggested. arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/am335x-shc.dts | 577 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 579 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/am335x-shc.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 30bbc37..65d750f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -466,7 +466,8 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-pepper.dtb \ am335x-lxm.dtb \ am335x-chiliboard.dtb \ - am335x-wega-rdk.dtb + am335x-wega-rdk.dtb \ + am335x-shc.dtb dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-duovero-parlor.dtb \ omap4-panda.dtb \ diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts new file mode 100644 index 0000000..1b5b044 --- /dev/null +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -0,0 +1,577 @@ +/* + * support for the bosch am335x based shc c3 board + * + * Copyright, C) 2015 Heiko Schocher + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include + +/ { + model = "Bosch SHC"; + compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx"; + + aliases { + mmcblk0 = &mmc1; + mmcblk1 = &mmc2; + }; + + cpus { + cpu@0 { + /* + * To consider voltage drop between PMIC and SoC, + * tolerance value is reduced to 2% from 4% and + * voltage value is increased as a precaution. + */ + operating-points = < + /* kHz uV */ + 594000 1225000 + 294000 1125000 + >; + voltage-tolerance = <2>; /* 2 percentage */ + cpu0-supply = <&dcdc2_reg>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + back_button { + label = "Back Button"; + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + linux,code = ; + debounce-interval = <1000>; + gpio-key,wakeup; + }; + + front_button { + label = "Front Button"; + gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + linux,code = ; + debounce-interval = <1000>; + gpio-key,wakeup; + }; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led@1 { + label = "shc:power:red"; + gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@2 { + label = "shc:power:bl"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + default-state = "on"; + }; + + led@3 { + label = "shc:lan:red"; + gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@4 { + label = "shc:lan:bl"; + gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@5 { + label = "shc:cloud:red"; + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@6 { + label = "shc:cloud:bl"; + gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&aes { + status = "okay"; +}; + +&cppi41dma { + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; + + ethernetphy0: ethernet-phy@0 { + reg = <0>; + smsc,disable-energy-detect; + }; +}; + +&epwmss1 { + status = "okay"; + + ehrpwm1: ehrpwm@48302200 { + pinctrl-names = "default"; + pinctrl-0 = <&ehrpwm1_pins>; + status = "okay"; + }; +}; + +&gpio1 { + hmtc_rst { + gpio-hog; + gpios = <24 GPIO_ACTIVE_LOW>; + output-high; + line-name = "homematic_reset"; + }; + + hmtc_prog { + gpio-hog; + gpios = <27 GPIO_ACTIVE_LOW>; + output-high; + line-name = "homematic_program"; + }; +}; + +&gpio3 { + zgb_rst { + gpio-hog; + gpios = <18 GPIO_ACTIVE_LOW>; + output-low; + line-name = "zigbee_reset"; + }; + + zgb_boot { + gpio-hog; + gpios = <19 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "zigbee_boot"; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + at24@50 { + compatible = "at24,24c32"; + pagesize = <32>; + reg = <0x50>; + }; + + pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; + slaves = <1>; + cpsw_emac0: slave@4a100200 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; + phy-handle = <ðernetphy0>; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + bus-width = <0x4>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + max-frequency = <26000000>; + vmmc-supply = <&vmmcsd_fixed>; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + max-frequency = <26000000>; + sd-uhs-sdr25; + vmmc-supply = <&vmmcsd_fixed>; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; + bus-width = <4>; + cap-power-off-card; + max-frequency = <26000000>; + sd-uhs-sdr25; + vmmc-supply = <&vmmcsd_fixed>; + status = "okay"; +}; + +&rtc { + ti,no-init; +}; + +&sham { + status = "okay"; +}; + +&tps { + compatible = "ti,tps65217"; + ti,pmic-shutdown-controller; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-name = "vdds_dpr"; + regulator-compatible = "dcdc1"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1450000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + /* + * VDD_MPU voltage limits 0.95V - 1.26V with + * +/-4% tolerance + */ + regulator-compatible = "dcdc2"; + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <70000>; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + /* + * VDD_CORE voltage limits 0.95V - 1.1V with + * +/-4% tolerance + */ + regulator-name = "vdd_core"; + regulator-compatible = "dcdc3"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1125000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-name = "vio,vrtc,vdds"; + regulator-compatible = "ldo1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-name = "vdd_3v3aux"; + regulator-compatible = "ldo2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-name = "vdd_1v8"; + regulator-compatible = "ldo3"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-name = "vdd_3v3a"; + regulator-compatible = "ldo4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + /* xdma_event_intr1.clkout2 */ + AM33XX_IOPAD(0x9b4, PIN_INPUT | MUX_MODE6) + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE0) + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) + /* mdio_clk.mdio_clk */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + ehrpwm1_pins: pinmux_ehrpwm1 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */ + >; + }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x880, PIN_INPUT | MUX_MODE2) + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE5) + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x830, PIN_INPUT | MUX_MODE3) + AM33XX_IOPAD(0x834, PIN_INPUT | MUX_MODE3) + AM33XX_IOPAD(0x838, PIN_INPUT | MUX_MODE3) + AM33XX_IOPAD(0x83c, PIN_INPUT | MUX_MODE3) + AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE3) + AM33XX_IOPAD(0x88c, PIN_INPUT | MUX_MODE3) + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x968, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x970, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0) + >; + }; + + uart1_pins: pinmux_uart1 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x97C, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0) + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) + AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) + AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE6) + >; + }; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLUP | MUX_MODE7) + AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7) + AM33XX_IOPAD(0x87c, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x894, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x958, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLUP | MUX_MODE7) + AM33XX_IOPAD(0x9a0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE7) + >; + }; +};