@@ -58,30 +58,14 @@
};
};
- L2: l2-cache {
- compatible = "arm,pl310-cache";
- reg = <0x2000 0x1000>;
- cache-unified;
- cache-level = <2>;
- };
-
- gic: interrupt-controller@19021000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x1000 0x1000>,
- <0x0100 0x100>;
- };
-
- timer@19020200 {
+ timer@0200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x0200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&periph_clk>;
};
- twd-timer@19020600 {
+ twd-timer@0600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x0600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
@@ -89,13 +73,29 @@
clocks = <&periph_clk>;
};
- twd-watchdog@19020620 {
+ twd-watchdog@0620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0x0620 0x20>;
interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&periph_clk>;
};
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>,
+ <0x0100 0x100>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0x2000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
};
clocks {
@@ -116,7 +116,7 @@
#address-cells = <1>;
#size-cells = <1>;
- uart0: serial@18000300 {
+ uart0: serial@0300 {
compatible = "ns16550a";
reg = <0x0300 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -124,7 +124,7 @@
status = "disabled";
};
- uart1: serial@18000400 {
+ uart1: serial@0400 {
compatible = "ns16550a";
reg = <0x0400 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -132,7 +132,7 @@
status = "disabled";
};
- pcie0: pcie@18012000 {
+ pcie0: pcie@12000 {
compatible = "brcm,iproc-pcie";
reg = <0x12000 0x1000>;
@@ -156,7 +156,7 @@
status = "disabled";
};
- pcie1: pcie@18013000 {
+ pcie1: pcie@13000 {
compatible = "brcm,iproc-pcie";
reg = <0x13000 0x1000>;
@@ -180,7 +180,7 @@
status = "disabled";
};
- pcie2: pcie@18014000 {
+ pcie2: pcie@14000 {
compatible = "brcm,iproc-pcie";
reg = <0x14000 0x1000>;
@@ -204,7 +204,7 @@
status = "disabled";
};
- nand: nand@18026000 {
+ nand: nand@26000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x026000 0x600>,
<0x11b408 0x600>,
Minor changes to the Broadcom Northstar Plus device tree to make it more organized and clean. Firstly, move the GIC and L2 cache entries to be sequential with respect to the memory addresses. Secondly, modify the address portion of the entry names to reflect the difference from the range modification. Signed-off-by: Jon Mason <jonmason@broadcom.com> --- arch/arm/boot/dts/bcm-nsp.dtsi | 50 +++++++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 25 deletions(-)