new file mode 100644
@@ -0,0 +1,19 @@
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+ pmic@4 {
+ compatible = "qcom,pm8004", "qcom,spmi-pmic";
+ reg = <0x4 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pmic@5 {
+ compatible = "qcom,pm8004", "qcom,spmi-pmic";
+ reg = <0x5 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
new file mode 100644
@@ -0,0 +1,19 @@
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+ pmic@0 {
+ compatible = "qcom,pm8994", "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pmic@1 {
+ compatible = "qcom,pm8994", "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
new file mode 100644
@@ -0,0 +1,19 @@
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+ pmic@2 {
+ compatible = "qcom,pmi8994", "qcom,spmi-pmic";
+ reg = <0x2 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pmic@3 {
+ compatible = "qcom,pmi8994", "qcom,spmi-pmic";
+ reg = <0x3 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
Add the skeleton nodes for the PMICs found on msm8996-mtp devices. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> --- arch/arm64/boot/dts/qcom/pm8004.dtsi | 19 +++++++++++++++++++ arch/arm64/boot/dts/qcom/pm8994.dtsi | 19 +++++++++++++++++++ arch/arm64/boot/dts/qcom/pmi8994.dtsi | 19 +++++++++++++++++++ 3 files changed, 57 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/pm8004.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm8994.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pmi8994.dtsi