Message ID | 1448008952-1787-3-git-send-email-jszhang@marvell.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 20.11.2015 09:42, Jisheng Zhang wrote: > Add common clk driver for Marvell SoCs newer than BG2, BG2CD, BG2Q. > berlin_clk_setup() is provided to setup and register such kind of clks. > > Signed-off-by: Jisheng Zhang <jszhang@marvell.com> > --- > drivers/clk/berlin/Makefile | 2 +- > drivers/clk/berlin/clk.c | 203 ++++++++++++++++++++++++++++++++++++++++++++ > drivers/clk/berlin/clk.h | 33 +++++++ > 3 files changed, 237 insertions(+), 1 deletion(-) > create mode 100644 drivers/clk/berlin/clk.c > create mode 100644 drivers/clk/berlin/clk.h > > diff --git a/drivers/clk/berlin/Makefile b/drivers/clk/berlin/Makefile > index eee42b0..ee2e09d 100644 > --- a/drivers/clk/berlin/Makefile > +++ b/drivers/clk/berlin/Makefile > @@ -1,5 +1,5 @@ > obj-y += berlin2-avpll.o berlin2-pll.o berlin2-div.o > -obj-y += pll.o > +obj-y += pll.o clk.o Same comment about the naming convention. > obj-$(CONFIG_MACH_BERLIN_BG2) += bg2.o > obj-$(CONFIG_MACH_BERLIN_BG2CD) += bg2.o > obj-$(CONFIG_MACH_BERLIN_BG2Q) += bg2q.o > diff --git a/drivers/clk/berlin/clk.c b/drivers/clk/berlin/clk.c > new file mode 100644 > index 0000000..70f2b9d > --- /dev/null > +++ b/drivers/clk/berlin/clk.c > @@ -0,0 +1,203 @@ > +/* > + * Copyright (c) 2015 Marvell Technology Group Ltd. > + * > + * Author: Jisheng Zhang <jszhang@marvell.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along with > + * this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/clk-provider.h> > +#include <linux/io.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/slab.h> > + > +#include "clk.h" > + > +#define CLKEN (1 << 0) #define CLKEN BIT(0) > +#define CLKPLLSEL_MASK 7 Please use hex numbers for the mask. > +#define CLKPLLSEL_SHIFT 1 > +#define CLKPLLSWITCH (1 << 4) > +#define CLKSWITCH (1 << 5) > +#define CLKD3SWITCH (1 << 6) BIT() again. > +#define CLKSEL_MASK 7 Hex again. > +#define CLKSEL_SHIFT 7 > + > +#define CLK_SOURCE_MAX 5 > + > +struct berlin_clk { > + struct clk_hw hw; > + void __iomem *base; > +}; > + > +#define to_berlin_clk(hw) container_of(hw, struct berlin_clk, hw) > + > +static u8 clk_div[] = {1, 2, 4, 6, 8, 12, 1, 1}; Hmm, this pretty much looks like berlin2-div dividers... > +static unsigned long berlin_clk_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > +{ > + u32 val, divider; > + struct berlin_clk *clk = to_berlin_clk(hw); > + > + val = readl_relaxed(clk->base); > + if (val & CLKD3SWITCH) > + divider = 3; and this looks like berlin2-div structure, doesn't it? Again, please reuse what is already available. Sebastian > + else { > + if (val & CLKSWITCH) { > + val >>= CLKSEL_SHIFT; > + val &= CLKSEL_MASK; > + divider = clk_div[val]; > + } else > + divider = 1; > + } > + > + return parent_rate / divider; > +} > + > +static u8 berlin_clk_get_parent(struct clk_hw *hw) > +{ > + u32 val; > + struct berlin_clk *clk = to_berlin_clk(hw); > + > + val = readl_relaxed(clk->base); > + if (val & CLKPLLSWITCH) { > + val >>= CLKPLLSEL_SHIFT; > + val &= CLKPLLSEL_MASK; > + return val; > + } > + > + return 0; > +} > + > +static int berlin_clk_enable(struct clk_hw *hw) > +{ > + u32 val; > + struct berlin_clk *clk = to_berlin_clk(hw); > + > + val = readl_relaxed(clk->base); > + val |= CLKEN; > + writel_relaxed(val, clk->base); > + > + return 0; > +} > + > +static void berlin_clk_disable(struct clk_hw *hw) > +{ > + u32 val; > + struct berlin_clk *clk = to_berlin_clk(hw); > + > + val = readl_relaxed(clk->base); > + val &= ~CLKEN; > + writel_relaxed(val, clk->base); > +} > + > +static int berlin_clk_is_enabled(struct clk_hw *hw) > +{ > + u32 val; > + struct berlin_clk *clk = to_berlin_clk(hw); > + > + val = readl_relaxed(clk->base); > + val &= CLKEN; > + > + return val ? 1 : 0; > +} > + > +static const struct clk_ops berlin_clk_ops = { > + .recalc_rate = berlin_clk_recalc_rate, > + .get_parent = berlin_clk_get_parent, > + .enable = berlin_clk_enable, > + .disable = berlin_clk_disable, > + .is_enabled = berlin_clk_is_enabled, > +}; > + > +static struct clk * __init > +berlin_clk_register(const char *name, int num_parents, > + const char **parent_names, unsigned long flags, > + void __iomem *base) > +{ > + struct clk *clk; > + struct berlin_clk *bclk; > + struct clk_init_data init; > + > + bclk = kzalloc(sizeof(*bclk), GFP_KERNEL); > + if (!bclk) > + return ERR_PTR(-ENOMEM); > + > + init.name = name; > + init.ops = &berlin_clk_ops; > + init.parent_names = parent_names; > + init.num_parents = num_parents; > + init.flags = flags; > + > + bclk->base = base; > + bclk->hw.init = &init; > + > + clk = clk_register(NULL, &bclk->hw); > + if (IS_ERR(clk)) > + kfree(bclk); > + > + return clk; > +} > + > +void __init berlin_clk_setup(struct device_node *np, > + const struct clk_desc *descs, > + struct clk_onecell_data *clk_data, > + int n) > +{ > + int i, ret, num_parents; > + void __iomem *base; > + struct clk **clks; > + const char *parent_names[CLK_SOURCE_MAX]; > + > + num_parents = of_clk_get_parent_count(np); > + if (num_parents <= 0 || num_parents > CLK_SOURCE_MAX) > + return; > + > + of_clk_parent_fill(np, parent_names, num_parents); > + > + clks = kcalloc(n, sizeof(struct clk *), GFP_KERNEL); > + if (!clks) > + return; > + > + base = of_iomap(np, 0); > + if (WARN_ON(!base)) > + goto err_iomap; > + > + for (i = 0; i < n; i++) { > + struct clk *clk; > + > + clk = berlin_clk_register(descs[i].name, > + num_parents, parent_names, > + descs[i].flags, > + base + descs[i].offset); > + if (WARN_ON(IS_ERR(clks[i]))) > + goto err_clk_register; > + clks[i] = clk; > + } > + > + clk_data->clks = clks; > + clk_data->clk_num = i; > + > + ret = of_clk_add_provider(np, of_clk_src_onecell_get, clk_data); > + if (WARN_ON(ret)) > + goto err_clk_register; > + return; > + > +err_clk_register: > + for (i = 0; i < n; i++) > + clk_unregister(clks[i]); > + iounmap(base); > +err_iomap: > + kfree(clks); > +} > diff --git a/drivers/clk/berlin/clk.h b/drivers/clk/berlin/clk.h > new file mode 100644 > index 0000000..5e5680e > --- /dev/null > +++ b/drivers/clk/berlin/clk.h > @@ -0,0 +1,33 @@ > +/* > + * Copyright (c) 2015 Marvell Technology Group Ltd. > + * > + * Author: Jisheng Zhang <jszhang@marvell.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along with > + * this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#ifndef __BERLIN_CLK_H > +#define __BERLIN_CLK_H > + > +struct clk_desc { > + const char *name; > + u32 offset; > + unsigned long flags; > +}; > + > +void __init berlin_clk_setup(struct device_node *np, > + const struct clk_desc *desc, > + struct clk_onecell_data *clk_data, > + int n); > + > +#endif >
diff --git a/drivers/clk/berlin/Makefile b/drivers/clk/berlin/Makefile index eee42b0..ee2e09d 100644 --- a/drivers/clk/berlin/Makefile +++ b/drivers/clk/berlin/Makefile @@ -1,5 +1,5 @@ obj-y += berlin2-avpll.o berlin2-pll.o berlin2-div.o -obj-y += pll.o +obj-y += pll.o clk.o obj-$(CONFIG_MACH_BERLIN_BG2) += bg2.o obj-$(CONFIG_MACH_BERLIN_BG2CD) += bg2.o obj-$(CONFIG_MACH_BERLIN_BG2Q) += bg2q.o diff --git a/drivers/clk/berlin/clk.c b/drivers/clk/berlin/clk.c new file mode 100644 index 0000000..70f2b9d --- /dev/null +++ b/drivers/clk/berlin/clk.c @@ -0,0 +1,203 @@ +/* + * Copyright (c) 2015 Marvell Technology Group Ltd. + * + * Author: Jisheng Zhang <jszhang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/slab.h> + +#include "clk.h" + +#define CLKEN (1 << 0) +#define CLKPLLSEL_MASK 7 +#define CLKPLLSEL_SHIFT 1 +#define CLKPLLSWITCH (1 << 4) +#define CLKSWITCH (1 << 5) +#define CLKD3SWITCH (1 << 6) +#define CLKSEL_MASK 7 +#define CLKSEL_SHIFT 7 + +#define CLK_SOURCE_MAX 5 + +struct berlin_clk { + struct clk_hw hw; + void __iomem *base; +}; + +#define to_berlin_clk(hw) container_of(hw, struct berlin_clk, hw) + +static u8 clk_div[] = {1, 2, 4, 6, 8, 12, 1, 1}; + +static unsigned long berlin_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + u32 val, divider; + struct berlin_clk *clk = to_berlin_clk(hw); + + val = readl_relaxed(clk->base); + if (val & CLKD3SWITCH) + divider = 3; + else { + if (val & CLKSWITCH) { + val >>= CLKSEL_SHIFT; + val &= CLKSEL_MASK; + divider = clk_div[val]; + } else + divider = 1; + } + + return parent_rate / divider; +} + +static u8 berlin_clk_get_parent(struct clk_hw *hw) +{ + u32 val; + struct berlin_clk *clk = to_berlin_clk(hw); + + val = readl_relaxed(clk->base); + if (val & CLKPLLSWITCH) { + val >>= CLKPLLSEL_SHIFT; + val &= CLKPLLSEL_MASK; + return val; + } + + return 0; +} + +static int berlin_clk_enable(struct clk_hw *hw) +{ + u32 val; + struct berlin_clk *clk = to_berlin_clk(hw); + + val = readl_relaxed(clk->base); + val |= CLKEN; + writel_relaxed(val, clk->base); + + return 0; +} + +static void berlin_clk_disable(struct clk_hw *hw) +{ + u32 val; + struct berlin_clk *clk = to_berlin_clk(hw); + + val = readl_relaxed(clk->base); + val &= ~CLKEN; + writel_relaxed(val, clk->base); +} + +static int berlin_clk_is_enabled(struct clk_hw *hw) +{ + u32 val; + struct berlin_clk *clk = to_berlin_clk(hw); + + val = readl_relaxed(clk->base); + val &= CLKEN; + + return val ? 1 : 0; +} + +static const struct clk_ops berlin_clk_ops = { + .recalc_rate = berlin_clk_recalc_rate, + .get_parent = berlin_clk_get_parent, + .enable = berlin_clk_enable, + .disable = berlin_clk_disable, + .is_enabled = berlin_clk_is_enabled, +}; + +static struct clk * __init +berlin_clk_register(const char *name, int num_parents, + const char **parent_names, unsigned long flags, + void __iomem *base) +{ + struct clk *clk; + struct berlin_clk *bclk; + struct clk_init_data init; + + bclk = kzalloc(sizeof(*bclk), GFP_KERNEL); + if (!bclk) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &berlin_clk_ops; + init.parent_names = parent_names; + init.num_parents = num_parents; + init.flags = flags; + + bclk->base = base; + bclk->hw.init = &init; + + clk = clk_register(NULL, &bclk->hw); + if (IS_ERR(clk)) + kfree(bclk); + + return clk; +} + +void __init berlin_clk_setup(struct device_node *np, + const struct clk_desc *descs, + struct clk_onecell_data *clk_data, + int n) +{ + int i, ret, num_parents; + void __iomem *base; + struct clk **clks; + const char *parent_names[CLK_SOURCE_MAX]; + + num_parents = of_clk_get_parent_count(np); + if (num_parents <= 0 || num_parents > CLK_SOURCE_MAX) + return; + + of_clk_parent_fill(np, parent_names, num_parents); + + clks = kcalloc(n, sizeof(struct clk *), GFP_KERNEL); + if (!clks) + return; + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + goto err_iomap; + + for (i = 0; i < n; i++) { + struct clk *clk; + + clk = berlin_clk_register(descs[i].name, + num_parents, parent_names, + descs[i].flags, + base + descs[i].offset); + if (WARN_ON(IS_ERR(clks[i]))) + goto err_clk_register; + clks[i] = clk; + } + + clk_data->clks = clks; + clk_data->clk_num = i; + + ret = of_clk_add_provider(np, of_clk_src_onecell_get, clk_data); + if (WARN_ON(ret)) + goto err_clk_register; + return; + +err_clk_register: + for (i = 0; i < n; i++) + clk_unregister(clks[i]); + iounmap(base); +err_iomap: + kfree(clks); +} diff --git a/drivers/clk/berlin/clk.h b/drivers/clk/berlin/clk.h new file mode 100644 index 0000000..5e5680e --- /dev/null +++ b/drivers/clk/berlin/clk.h @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2015 Marvell Technology Group Ltd. + * + * Author: Jisheng Zhang <jszhang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __BERLIN_CLK_H +#define __BERLIN_CLK_H + +struct clk_desc { + const char *name; + u32 offset; + unsigned long flags; +}; + +void __init berlin_clk_setup(struct device_node *np, + const struct clk_desc *desc, + struct clk_onecell_data *clk_data, + int n); + +#endif
Add common clk driver for Marvell SoCs newer than BG2, BG2CD, BG2Q. berlin_clk_setup() is provided to setup and register such kind of clks. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> --- drivers/clk/berlin/Makefile | 2 +- drivers/clk/berlin/clk.c | 203 ++++++++++++++++++++++++++++++++++++++++++++ drivers/clk/berlin/clk.h | 33 +++++++ 3 files changed, 237 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/berlin/clk.c create mode 100644 drivers/clk/berlin/clk.h