@@ -184,7 +184,70 @@ static const struct pinmux_ops pxa2xx_pinmux_ops = {
.gpio_set_direction = pxa2xx_pmx_gpio_set_direction,
};
+static int pxa2xx_pconf_group_get(struct pinctrl_dev *pctldev,
+ unsigned group,
+ unsigned long *config)
+{
+ struct pxa_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ struct pxa_pinctrl_group *g = pctl->groups + group;
+ unsigned long flags;
+ unsigned pin = g->pin;
+ void __iomem *pgsr = pctl->base_pgsr[pin / 32];
+ u32 val;
+
+ spin_lock_irqsave(&pctl->lock, flags);
+ val = readl_relaxed(pgsr) & BIT(pin % 32);
+ *config = val ? PIN_CONFIG_LOW_POWER_MODE : 0;
+ spin_unlock_irqrestore(&pctl->lock, flags);
+
+ dev_dbg(pctl->dev, "get sleep gpio state(pin=%d) %d\n",
+ pin, !!val);
+ return 0;
+}
+
+static int pxa2xx_pconf_group_set(struct pinctrl_dev *pctldev,
+ unsigned group,
+ unsigned long *configs,
+ unsigned num_configs)
+{
+ struct pxa_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ struct pxa_pinctrl_group *g = pctl->groups + group;
+ unsigned long flags;
+ unsigned pin = g->pin;
+ void __iomem *pgsr = pctl->base_pgsr[pin / 32];
+ int i, is_set = 0;
+ u32 val;
+
+ for (i = 0; i < num_configs; i++) {
+ switch (pinconf_to_config_param(configs[i])) {
+ case PIN_CONFIG_LOW_POWER_MODE:
+ is_set = pinconf_to_config_argument(configs[i]);
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ dev_dbg(pctl->dev, "set sleep gpio state(pin=%d) %d\n",
+ pin, is_set);
+
+ spin_lock_irqsave(&pctl->lock, flags);
+ val = readl_relaxed(pgsr);
+ val = (val & ~BIT(pin % 32)) | (is_set ? BIT(pin % 32) : 0);
+ writel_relaxed(val, pgsr);
+ spin_unlock_irqrestore(&pctl->lock, flags);
+
+ return 0;
+}
+
+static const struct pinconf_ops pxa2xx_pconf_ops = {
+ .pin_config_group_get = pxa2xx_pconf_group_get,
+ .pin_config_group_set = pxa2xx_pconf_group_set,
+ .is_generic = true,
+};
+
static struct pinctrl_desc pxa2xx_pinctrl_desc = {
+ .confops = &pxa2xx_pconf_ops,
.pctlops = &pxa2xx_pctl_ops,
.pmxops = &pxa2xx_pinmux_ops,
};
Add pin configuration for pxa2xx architectures. PXA doesn't provide any bias, push, pull capabilities. The only capability is to set a state for the pins when the platform enter sleep or deep sleep mode. The state of a pin is set by : - whether the GPIO direction was input or output - if it is output, a register set programs whether the pin should be held to ground or VccIO Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> --- drivers/pinctrl/pxa/pinctrl-pxa2xx.c | 63 ++++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+)