| Message ID | 1448890918-6999-1-git-send-email-jszhang@marvell.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Nov 30, 2015 at 09:41:58PM +0800, Jisheng Zhang wrote: > This patch adds an idle-states node to describe the berlin4ct idle > states and also adds references to the idle-states node in all CPU > nodes. After this patch cpuidle is enabled. > > Signed-off-by: Jisheng Zhang <jszhang@marvell.com> > --- > arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > > diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi > index 39d0676..3649cea 100644 > --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi > +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi > @@ -69,6 +69,7 @@ > device_type = "cpu"; > reg = <0x0>; > enable-method = "psci"; > + cpu-idle-states = <&CPU_SLEEP_0>; > }; > > cpu1: cpu@1 { > @@ -76,6 +77,7 @@ > device_type = "cpu"; > reg = <0x1>; > enable-method = "psci"; > + cpu-idle-states = <&CPU_SLEEP_0>; > }; > > cpu2: cpu@2 { > @@ -83,6 +85,7 @@ > device_type = "cpu"; > reg = <0x2>; > enable-method = "psci"; > + cpu-idle-states = <&CPU_SLEEP_0>; > }; > > cpu3: cpu@3 { > @@ -90,6 +93,19 @@ > device_type = "cpu"; > reg = <0x3>; > enable-method = "psci"; > + cpu-idle-states = <&CPU_SLEEP_0>; > + }; > + > + idle-states { > + entry-method = "psci"; > + CPU_SLEEP_0: cpu-sleep-0 { > + compatible = "arm,idle-state"; > + local-timer-stop; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <75>; > + exit-latency-us = <155>; > + min-residency-us = <1000>; > + }; > }; > }; > > -- > 2.6.2 >
On 30.11.2015 14:41, Jisheng Zhang wrote: > This patch adds an idle-states node to describe the berlin4ct idle > states and also adds references to the idle-states node in all CPU > nodes. After this patch cpuidle is enabled. > > Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Applied to berlin64/dt with Lorenzo's Ack. Thanks! Sebastian > --- > arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi > index 39d0676..3649cea 100644 > --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi > +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi > @@ -69,6 +69,7 @@ > device_type = "cpu"; > reg = <0x0>; > enable-method = "psci"; > + cpu-idle-states = <&CPU_SLEEP_0>; > }; > > cpu1: cpu@1 { > @@ -76,6 +77,7 @@ > device_type = "cpu"; > reg = <0x1>; > enable-method = "psci"; > + cpu-idle-states = <&CPU_SLEEP_0>; > }; > > cpu2: cpu@2 { > @@ -83,6 +85,7 @@ > device_type = "cpu"; > reg = <0x2>; > enable-method = "psci"; > + cpu-idle-states = <&CPU_SLEEP_0>; > }; > > cpu3: cpu@3 { > @@ -90,6 +93,19 @@ > device_type = "cpu"; > reg = <0x3>; > enable-method = "psci"; > + cpu-idle-states = <&CPU_SLEEP_0>; > + }; > + > + idle-states { > + entry-method = "psci"; > + CPU_SLEEP_0: cpu-sleep-0 { > + compatible = "arm,idle-state"; > + local-timer-stop; > + arm,psci-suspend-param = <0x0010000>; > + entry-latency-us = <75>; > + exit-latency-us = <155>; > + min-residency-us = <1000>; > + }; > }; > }; > >
diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi index 39d0676..3649cea 100644 --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi @@ -69,6 +69,7 @@ device_type = "cpu"; reg = <0x0>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; }; cpu1: cpu@1 { @@ -76,6 +77,7 @@ device_type = "cpu"; reg = <0x1>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; }; cpu2: cpu@2 { @@ -83,6 +85,7 @@ device_type = "cpu"; reg = <0x2>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; }; cpu3: cpu@3 { @@ -90,6 +93,19 @@ device_type = "cpu"; reg = <0x3>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + }; + + idle-states { + entry-method = "psci"; + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <75>; + exit-latency-us = <155>; + min-residency-us = <1000>; + }; }; };
This patch adds an idle-states node to describe the berlin4ct idle states and also adds references to the idle-states node in all CPU nodes. After this patch cpuidle is enabled. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> --- arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)