| Message ID | 1449040591-13618-1-git-send-email-Yuantian.Tang@freescale.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Dec 02, 2015 at 03:16:31PM +0800, Yuantian.Tang@freescale.com wrote: > From: Tang Yuantian <Yuantian.Tang@freescale.com> > > Added sata node to ls1021aqds and ls1021atwr board to support > sata function. > > Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> > --- > v3: > - refine the title and commit message > - added a status property so that sata can be controlled > by board specific dts. > v2: > - put reg-names right after reg property > > arch/arm/boot/dts/ls1021a-qds.dts | 4 ++++ > arch/arm/boot/dts/ls1021a-twr.dts | 4 ++++ > arch/arm/boot/dts/ls1021a.dtsi | 11 +++++++++++ > 3 files changed, 19 insertions(+) > > diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts > index 0521e68..803cc54 100644 > --- a/arch/arm/boot/dts/ls1021a-qds.dts > +++ b/arch/arm/boot/dts/ls1021a-qds.dts > @@ -327,3 +327,7 @@ > &uart1 { > status = "okay"; > }; > + > +&sata { > + status = "okay"; > +}; The labelled nodes are sorted alphabetically. Please keep the new addition sorted too. > diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts > index fbb89d1..62dec7c 100644 > --- a/arch/arm/boot/dts/ls1021a-twr.dts > +++ b/arch/arm/boot/dts/ls1021a-twr.dts > @@ -219,3 +219,7 @@ > &uart1 { > status = "okay"; > }; > + > +&sata { > + status = "okay"; > +}; Ditto Shawn > diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi > index 9430a99..da9bd7e 100644 > --- a/arch/arm/boot/dts/ls1021a.dtsi > +++ b/arch/arm/boot/dts/ls1021a.dtsi > @@ -143,6 +143,17 @@ > status = "disabled"; > }; > > + sata: sata@3200000 { > + compatible = "fsl,ls1021a-ahci"; > + reg = <0x0 0x3200000 0x0 0x10000>, > + <0x0 0x20220520 0x0 0x4>; > + reg-names = "ahci", "sata-ecc"; > + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&platform_clk 1>; > + dma-coherent; > + status = "disabled"; > + }; > + > scfg: scfg@1570000 { > compatible = "fsl,ls1021a-scfg", "syscon"; > reg = <0x0 0x1570000 0x0 0x10000>; > -- > 2.1.0.27.g96db324 > >
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts index 0521e68..803cc54 100644 --- a/arch/arm/boot/dts/ls1021a-qds.dts +++ b/arch/arm/boot/dts/ls1021a-qds.dts @@ -327,3 +327,7 @@ &uart1 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index fbb89d1..62dec7c 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -219,3 +219,7 @@ &uart1 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 9430a99..da9bd7e 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -143,6 +143,17 @@ status = "disabled"; }; + sata: sata@3200000 { + compatible = "fsl,ls1021a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20220520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&platform_clk 1>; + dma-coherent; + status = "disabled"; + }; + scfg: scfg@1570000 { compatible = "fsl,ls1021a-scfg", "syscon"; reg = <0x0 0x1570000 0x0 0x10000>;