| Message ID | 1452659289-30837-2-git-send-email-wenyou.yang@atmel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 13.01.2016 13:28, Wenyou Yang wrote: > This patch adds new driver for Active-semi ACT8945A ActivePath > charger (part of ACT8945A MFD driver) providing power supply class > information to userspace. > > The driver is configured through DTS (battery and system related > settings) and sysfs entries (timers and input over-voltage threshold). > > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > --- > > Changes in v4: > - use spaces after #define, not tabs. > - use BIT(n) macros to substitute (0x01 << x). > - change dt properties with more legible name. > > Changes in v3: > - update the file header with short version license and author line. > - remove unused member of struct act8945a_charger, dev. > - action due to removing the member of stuct act8945a_dev, dev. > - remove the unnecessary print out. > - remove the unnecessary act8945a_charger_remove(). > - fix align of the code-style. > > Changes in v2: > 1./ Substitute of_property_read_bool() for of_get_property(). > 2./ Substitute devm_power_supply_register() for power_supply_register(). > 3./ Use module_platform_driver(), instead of subsys_initcall(). > 4./ Substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2"). > > drivers/power/Kconfig | 7 + > drivers/power/Makefile | 1 + > drivers/power/act8945a_charger.c | 368 ++++++++++++++++++++++++++++++++++++++ > 3 files changed, 376 insertions(+) > create mode 100644 drivers/power/act8945a_charger.c > > diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig > index 1ddd13c..ae75211 100644 > --- a/drivers/power/Kconfig > +++ b/drivers/power/Kconfig > @@ -75,6 +75,13 @@ config BATTERY_88PM860X > help > Say Y here to enable battery monitor for Marvell 88PM860x chip. > > +config BATTERY_ACT8945A > + tristate "Active-semi ACT8945A charger driver" > + depends on MFD_ACT8945A > + help > + Say Y here to enable support for power supply provided by > + Active-semi ActivePath ACT8945A charger. > + > config BATTERY_DS2760 > tristate "DS2760 battery driver (HP iPAQ & others)" > depends on W1 && W1_SLAVE_DS2760 > diff --git a/drivers/power/Makefile b/drivers/power/Makefile > index 0e4eab5..e46b75d 100644 > --- a/drivers/power/Makefile > +++ b/drivers/power/Makefile > @@ -17,6 +17,7 @@ obj-$(CONFIG_WM8350_POWER) += wm8350_power.o > obj-$(CONFIG_TEST_POWER) += test_power.o > > obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o > +obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o > obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o > obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o > obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o > diff --git a/drivers/power/act8945a_charger.c b/drivers/power/act8945a_charger.c > new file mode 100644 > index 0000000..0ebfb66 > --- /dev/null > +++ b/drivers/power/act8945a_charger.c > @@ -0,0 +1,368 @@ > +/* > + * Power supply driver for the Active-semi ACT8945A PMIC > + * > + * Copyright (C) 2015 Atmel Corporation > + * > + * Author: Wenyou Yang <wenyou.yang@atmel.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + */ > +#include <linux/module.h> > +#include <linux/mfd/act8945a.h> > +#include <linux/of.h> > +#include <linux/of_gpio.h> > +#include <linux/platform_device.h> > +#include <linux/power_supply.h> > +#include <linux/regmap.h> > + > +static const char *act8945a_charger_model = "ACT8945A"; > +static const char *act8945a_charger_manufacturer = "Active-semi"; > + > +/** > + * ACT8945A Charger Register Map > + */ > + > +/* 0x70: Reserved */ > +#define ACT8945A_APCH_CFG 0x71 > +#define ACT8945A_APCH_STATUS 0x78 > +#define ACT8945A_APCH_CTRL 0x79 > +#define ACT8945A_APCH_STATE 0x7A > + > +/* ACT8945A_APCH_CFG */ > +#define APCH_CFG_OVPSET (0x03 << 0) > +#define APCH_CFG_OVPSET_6V6 (0x0 << 0) > +#define APCH_CFG_OVPSET_7V (0x1 << 0) > +#define APCH_CFG_OVPSET_7V5 (0x2 << 0) > +#define APCH_CFG_OVPSET_8V (0x3 << 0) > +#define APCH_CFG_PRETIMO (0x03 << 2) > +#define APCH_CFG_PRETIMO_40_MIN (0x0 << 2) > +#define APCH_CFG_PRETIMO_60_MIN (0x1 << 2) > +#define APCH_CFG_PRETIMO_80_MIN (0x2 << 2) > +#define APCH_CFG_PRETIMO_DISABLED (0x3 << 2) > +#define APCH_CFG_TOTTIMO (0x03 << 4) > +#define APCH_CFG_TOTTIMO_3_HOUR (0x0 << 4) > +#define APCH_CFG_TOTTIMO_4_HOUR (0x1 << 4) > +#define APCH_CFG_TOTTIMO_5_HOUR (0x2 << 4) > +#define APCH_CFG_TOTTIMO_DISABLED (0x3 << 4) To me this still looks ugly. These spaces after #defiine are not needed. You are using common prefix so indentation won't help. Instead just: +#define APCH_CFG_TOTTIMO (0x03 << 4) +#define APCH_CFG_TOTTIMO_3_HOUR (0x0 << 4) Easily readable. > +#define APCH_CFG_SUSCHG (0x01 << 7) > + > +#define APCH_STATUS_CHGDAT BIT(0) > +#define APCH_STATUS_INDAT BIT(1) > +#define APCH_STATUS_TEMPDAT BIT(2) > +#define APCH_STATUS_TIMRDAT BIT(3) > +#define APCH_STATUS_CHGSTAT BIT(4) > +#define APCH_STATUS_INSTAT BIT(5) > +#define APCH_STATUS_TEMPSTAT BIT(6) > +#define APCH_STATUS_TIMRSTAT BIT(7) > + > +#define APCH_CTRL_CHGEOCOUT BIT(0) > +#define APCH_CTRL_INDIS BIT(1) > +#define APCH_CTRL_TEMPOUT BIT(2) > +#define APCH_CTRL_TIMRPRE BIT(3) > +#define APCH_CTRL_CHGEOCIN BIT(4) > +#define APCH_CTRL_INCON BIT(5) > +#define APCH_CTRL_TEMPIN BIT(6) > +#define APCH_CTRL_TIMRTOT BIT(7) > + > +#define APCH_STATE_ACINSTAT (0x01 << 1) > +#define APCH_STATE_CSTATE (0x03 << 4) > +#define APCH_STATE_CSTATE_SHIFT 4 > +#define APCH_STATE_CSTATE_DISABLED 0x00 > +#define APCH_STATE_CSTATE_EOC 0x01 > +#define APCH_STATE_CSTATE_FAST 0x02 > +#define APCH_STATE_CSTATE_PRE 0x03 ditto I didn't point it previously but this is the same pattern... > + > +struct act8945a_charger { > + struct act8945a_dev *act8945a_dev; > + struct power_supply *psy; > + > + u32 tolal_time_out; > + u32 pre_time_out; > + u32 input_voltage_threshold; > + bool battery_temperature; > + int chglev_pin; > + int chglev_value; > +}; > + > +static int act8945a_get_charger_state(struct regmap *regmap, int *val) > +{ > + int ret; > + unsigned int status, state; > + > + ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status); > + if (ret < 0) > + return ret; > + > + ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state); > + if (ret < 0) > + return ret; > + > + state &= APCH_STATE_CSTATE; > + state >>= APCH_STATE_CSTATE_SHIFT; > + > + if (state == APCH_STATE_CSTATE_EOC) { > + if (status & APCH_STATUS_CHGDAT) > + *val = POWER_SUPPLY_STATUS_FULL; > + else > + *val = POWER_SUPPLY_STATUS_NOT_CHARGING; > + } else if ((state == APCH_STATE_CSTATE_FAST) || > + (state == APCH_STATE_CSTATE_PRE)) { > + *val = POWER_SUPPLY_STATUS_CHARGING; > + } else { > + *val = POWER_SUPPLY_STATUS_NOT_CHARGING; > + } > + > + return 0; > +} > + > +static int act8945a_get_charge_type(struct regmap *regmap, int *val) > +{ > + int ret; > + unsigned int state; > + > + ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state); > + if (ret < 0) > + return ret; > + > + state &= APCH_STATE_CSTATE; > + state >>= APCH_STATE_CSTATE_SHIFT; > + > + switch (state) { > + case APCH_STATE_CSTATE_PRE: > + *val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; > + break; > + case APCH_STATE_CSTATE_FAST: > + *val = POWER_SUPPLY_CHARGE_TYPE_FAST; > + break; > + case APCH_STATE_CSTATE_EOC: > + case APCH_STATE_CSTATE_DISABLED: > + default: > + *val = POWER_SUPPLY_CHARGE_TYPE_NONE; > + } > + > + return 0; > +} > + > +static int act8945a_get_battery_health(struct act8945a_charger *charger, > + struct regmap *regmap, int *val) > +{ > + int ret; > + unsigned int status; > + > + ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status); > + if (ret < 0) > + return ret; > + > + if (charger->battery_temperature && !(status & APCH_STATUS_TEMPDAT)) > + *val = POWER_SUPPLY_HEALTH_OVERHEAT; > + else if (!(status & APCH_STATUS_INDAT)) > + *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE; > + else if (status & APCH_STATUS_TIMRDAT) > + *val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; > + else > + *val = POWER_SUPPLY_HEALTH_GOOD; > + > + return 0; > +} > + > +static enum power_supply_property act8945a_charger_props[] = { > + POWER_SUPPLY_PROP_STATUS, > + POWER_SUPPLY_PROP_CHARGE_TYPE, > + POWER_SUPPLY_PROP_TECHNOLOGY, > + POWER_SUPPLY_PROP_HEALTH, > + POWER_SUPPLY_PROP_MODEL_NAME, > + POWER_SUPPLY_PROP_MANUFACTURER > +}; > + > +static int act8945a_charger_get_property(struct power_supply *psy, > + enum power_supply_property prop, > + union power_supply_propval *val) > +{ > + struct act8945a_charger *charger = power_supply_get_drvdata(psy); > + struct regmap *regmap = charger->act8945a_dev->regmap; > + int ret = 0; > + > + switch (prop) { > + case POWER_SUPPLY_PROP_STATUS: > + ret = act8945a_get_charger_state(regmap, &val->intval); > + break; > + case POWER_SUPPLY_PROP_CHARGE_TYPE: > + ret = act8945a_get_charge_type(regmap, &val->intval); > + break; > + case POWER_SUPPLY_PROP_TECHNOLOGY: > + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; > + break; > + case POWER_SUPPLY_PROP_HEALTH: > + ret = act8945a_get_battery_health(charger, > + regmap, &val->intval); > + break; > + case POWER_SUPPLY_PROP_MODEL_NAME: > + val->strval = act8945a_charger_model; > + break; > + case POWER_SUPPLY_PROP_MANUFACTURER: > + val->strval = act8945a_charger_manufacturer; > + break; > + default: > + return -EINVAL; > + } > + > + return ret; > +} > + > +static const struct power_supply_desc act8945a_charger_desc = { > + .name = "act8945a-charger", > + .type = POWER_SUPPLY_TYPE_BATTERY, > + .get_property = act8945a_charger_get_property, > + .properties = act8945a_charger_props, > + .num_properties = ARRAY_SIZE(act8945a_charger_props), > +}; > + > +#define DEFAULT_TOTAL_TIME_OUT 3 > +#define DEFAULT_PRE_TIME_OUT 40 > +#define DEFAULT_INPUT_OVP_THRESHOLD 6600 > + > +static int act8945a_charger_parse_dt(struct device *dev, > + struct act8945a_charger *charger) > +{ > + struct device_node *np = dev->of_node; > + enum of_gpio_flags flags; > + > + if (!np) { > + dev_err(dev, "no charger of node\n"); > + return -EINVAL; > + } > + > + charger->chglev_pin = of_get_named_gpio_flags(np, > + "active-semi,chglev-gpios", 0, &flags); > + > + charger->chglev_value = (flags == OF_GPIO_ACTIVE_LOW) ? 0 : 1; > + > + charger->battery_temperature = of_property_read_bool(np, > + "active-semi,check-battery-temperature"); > + > + if (of_property_read_u32(np, > + "active-semi,input-voltage-threshold-microvolt", > + &charger->input_voltage_threshold)) > + charger->input_voltage_threshold = DEFAULT_PRE_TIME_OUT; > + > + if (of_property_read_u32(np, "active-semi,precondition-timeout", > + &charger->pre_time_out)) > + charger->pre_time_out = DEFAULT_PRE_TIME_OUT; > + > + if (of_property_read_u32(np, "active-semi,total-timeout", > + &charger->tolal_time_out)) > + charger->tolal_time_out = DEFAULT_TOTAL_TIME_OUT; > + > + return 0; > +} > + > +static int act8945a_charger_config(struct act8945a_charger *charger) > +{ > + struct regmap *regmap = charger->act8945a_dev->regmap; > + u8 value = 0; Nothing changed here so you ignored my previous comment. That is not how we interact. If you do not agree with them it is fine. In such case write that you do not agree. We will discuss and reach a consensus. However you wrote "I will try" and then the comment was ignored... > + > + if (gpio_is_valid(charger->chglev_pin)) > + gpio_set_value(charger->chglev_pin, charger->chglev_value); > + > + switch (charger->input_voltage_threshold) { > + case 8000: > + value |= APCH_CFG_OVPSET_8V; > + break; > + case 7500: > + value |= APCH_CFG_OVPSET_7V5; > + break; > + case 7000: > + value |= APCH_CFG_OVPSET_7V; > + break; > + case 6600: > + default: > + value |= APCH_CFG_OVPSET_6V6; > + break; > + } > + > + switch (charger->pre_time_out) { > + case 60: > + value |= APCH_CFG_PRETIMO_60_MIN; > + break; > + case 80: > + value |= APCH_CFG_PRETIMO_80_MIN; > + break; > + case 0: > + value |= APCH_CFG_PRETIMO_DISABLED; > + break; > + case 40: > + default: > + value |= APCH_CFG_PRETIMO_40_MIN; > + break; > + } > + > + switch (charger->tolal_time_out) { > + case 4: > + value |= APCH_CFG_TOTTIMO_4_HOUR; > + break; > + case 5: > + value |= APCH_CFG_TOTTIMO_5_HOUR; > + break; > + case 0: > + value |= APCH_CFG_TOTTIMO_DISABLED; > + break; > + case 3: > + default: > + value |= APCH_CFG_TOTTIMO_3_HOUR; > + break; > + } > + > + return regmap_write(regmap, ACT8945A_APCH_CFG, value); > +} > + > +static int act8945a_charger_probe(struct platform_device *pdev) > +{ > + struct act8945a_dev *act8945a_dev = dev_get_drvdata(pdev->dev.parent); > + struct act8945a_charger *charger; > + struct power_supply_config psy_cfg = {}; > + int ret; > + > + charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); > + if (!charger) > + return -ENOMEM; > + > + platform_set_drvdata(pdev, charger); > + > + charger->act8945a_dev = act8945a_dev; > + > + ret = act8945a_charger_parse_dt(&pdev->dev, charger); > + if (ret) > + return ret; > + > + ret = act8945a_charger_config(charger); > + if (ret) > + return ret; > + > + psy_cfg.of_node = pdev->dev.of_node; > + psy_cfg.drv_data = charger; > + > + charger->psy = devm_power_supply_register(&pdev->dev, > + &act8945a_charger_desc, > + &psy_cfg); > + if (IS_ERR(charger->psy)) { > + dev_err(&pdev->dev, "failed to register power supply\n"); > + return PTR_ERR(charger->psy); > + } > + > + return 0; > +} > + > +static struct platform_driver act8945a_charger_driver = { > + .driver = { > + .name = "act8945a-charger", > + }, > + .probe = act8945a_charger_probe, > +}; > +module_platform_driver(act8945a_charger_driver); Is your driver auto-loaded properly when built as a module? By auto-loading I mean auto-loaded by udev, not by putting to some rc-script or other modprobe-load scripts. BR, Krzysztof
Hi Krzysztof, Thank you for your review. > -----Original Message----- > From: Krzysztof Kozlowski [mailto:k.kozlowski@samsung.com] > Sent: 2016?1?18? 16:19 > To: Yang, Wenyou <Wenyou.Yang@atmel.com>; Sebastian Reichel > <sre@kernel.org>; Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>; David > Woodhouse <dwmw2@infradead.org>; Rob Herring <robh+dt@kernel.org>; Pawel > Moll <pawel.moll@arm.com>; Mark Rutland <mark.rutland@arm.com>; Ian > Campbell <ijc+devicetree@hellion.org.uk>; Kumar Gala <galak@codeaurora.org> > Cc: linux-kernel@vger.kernel.org; Javier Martinez Canillas > <javier@dowhile0.org>; linux-pm@vger.kernel.org; linux-arm- > kernel@lists.infradead.org; Ferre, Nicolas <Nicolas.FERRE@atmel.com>; Lee > Jones <lee.jones@linaro.org> > Subject: Re: [PATCH v4 1/2] power: act8945a: add charger driver for ACT8945A > > On 13.01.2016 13:28, Wenyou Yang wrote: > > This patch adds new driver for Active-semi ACT8945A ActivePath charger > > (part of ACT8945A MFD driver) providing power supply class information > > to userspace. > > > > The driver is configured through DTS (battery and system related > > settings) and sysfs entries (timers and input over-voltage threshold). > > > > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > > --- > > > > Changes in v4: > > - use spaces after #define, not tabs. > > - use BIT(n) macros to substitute (0x01 << x). > > - change dt properties with more legible name. > > > > Changes in v3: > > - update the file header with short version license and author line. > > - remove unused member of struct act8945a_charger, dev. > > - action due to removing the member of stuct act8945a_dev, dev. > > - remove the unnecessary print out. > > - remove the unnecessary act8945a_charger_remove(). > > - fix align of the code-style. > > > > Changes in v2: > > 1./ Substitute of_property_read_bool() for of_get_property(). > > 2./ Substitute devm_power_supply_register() for power_supply_register(). > > 3./ Use module_platform_driver(), instead of subsys_initcall(). > > 4./ Substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2"). > > > > drivers/power/Kconfig | 7 + > > drivers/power/Makefile | 1 + > > drivers/power/act8945a_charger.c | 368 > > ++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 376 insertions(+) > > create mode 100644 drivers/power/act8945a_charger.c > > > > diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index > > 1ddd13c..ae75211 100644 > > --- a/drivers/power/Kconfig > > +++ b/drivers/power/Kconfig > > @@ -75,6 +75,13 @@ config BATTERY_88PM860X > > help > > Say Y here to enable battery monitor for Marvell 88PM860x chip. > > > > +config BATTERY_ACT8945A > > + tristate "Active-semi ACT8945A charger driver" > > + depends on MFD_ACT8945A > > + help > > + Say Y here to enable support for power supply provided by > > + Active-semi ActivePath ACT8945A charger. > > + > > config BATTERY_DS2760 > > tristate "DS2760 battery driver (HP iPAQ & others)" > > depends on W1 && W1_SLAVE_DS2760 > > diff --git a/drivers/power/Makefile b/drivers/power/Makefile index > > 0e4eab5..e46b75d 100644 > > --- a/drivers/power/Makefile > > +++ b/drivers/power/Makefile > > @@ -17,6 +17,7 @@ obj-$(CONFIG_WM8350_POWER) += > wm8350_power.o > > obj-$(CONFIG_TEST_POWER) += test_power.o > > > > obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o > > +obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o > > obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o > > obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o > > obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o > > diff --git a/drivers/power/act8945a_charger.c > > b/drivers/power/act8945a_charger.c > > new file mode 100644 > > index 0000000..0ebfb66 > > --- /dev/null > > +++ b/drivers/power/act8945a_charger.c > > @@ -0,0 +1,368 @@ > > +/* > > + * Power supply driver for the Active-semi ACT8945A PMIC > > + * > > + * Copyright (C) 2015 Atmel Corporation > > + * > > + * Author: Wenyou Yang <wenyou.yang@atmel.com> > > + * > > + * This program is free software; you can redistribute it and/or > > +modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + * > > + */ > > +#include <linux/module.h> > > +#include <linux/mfd/act8945a.h> > > +#include <linux/of.h> > > +#include <linux/of_gpio.h> > > +#include <linux/platform_device.h> > > +#include <linux/power_supply.h> > > +#include <linux/regmap.h> > > + > > +static const char *act8945a_charger_model = "ACT8945A"; static const > > +char *act8945a_charger_manufacturer = "Active-semi"; > > + > > +/** > > + * ACT8945A Charger Register Map > > + */ > > + > > +/* 0x70: Reserved */ > > +#define ACT8945A_APCH_CFG 0x71 > > +#define ACT8945A_APCH_STATUS 0x78 > > +#define ACT8945A_APCH_CTRL 0x79 > > +#define ACT8945A_APCH_STATE 0x7A > > + > > +/* ACT8945A_APCH_CFG */ > > +#define APCH_CFG_OVPSET (0x03 << 0) > > +#define APCH_CFG_OVPSET_6V6 (0x0 << 0) > > +#define APCH_CFG_OVPSET_7V (0x1 << 0) > > +#define APCH_CFG_OVPSET_7V5 (0x2 << 0) > > +#define APCH_CFG_OVPSET_8V (0x3 << 0) > > +#define APCH_CFG_PRETIMO (0x03 << 2) > > +#define APCH_CFG_PRETIMO_40_MIN (0x0 << 2) > > +#define APCH_CFG_PRETIMO_60_MIN (0x1 << 2) > > +#define APCH_CFG_PRETIMO_80_MIN (0x2 << 2) > > +#define APCH_CFG_PRETIMO_DISABLED (0x3 << 2) > > +#define APCH_CFG_TOTTIMO (0x03 << 4) > > +#define APCH_CFG_TOTTIMO_3_HOUR (0x0 << 4) > > +#define APCH_CFG_TOTTIMO_4_HOUR (0x1 << 4) > > +#define APCH_CFG_TOTTIMO_5_HOUR (0x2 << 4) > > +#define APCH_CFG_TOTTIMO_DISABLED (0x3 << 4) > > To me this still looks ugly. These spaces after #defiine are not needed. > You are using common prefix so indentation won't help. > > Instead just: > +#define APCH_CFG_TOTTIMO (0x03 << 4) > +#define APCH_CFG_TOTTIMO_3_HOUR (0x0 << 4) > > Easily readable. > > > +#define APCH_CFG_SUSCHG (0x01 << 7) > > + > > +#define APCH_STATUS_CHGDAT BIT(0) > > +#define APCH_STATUS_INDAT BIT(1) > > +#define APCH_STATUS_TEMPDAT BIT(2) > > +#define APCH_STATUS_TIMRDAT BIT(3) > > +#define APCH_STATUS_CHGSTAT BIT(4) > > +#define APCH_STATUS_INSTAT BIT(5) > > +#define APCH_STATUS_TEMPSTAT BIT(6) > > +#define APCH_STATUS_TIMRSTAT BIT(7) > > + > > +#define APCH_CTRL_CHGEOCOUT BIT(0) > > +#define APCH_CTRL_INDIS BIT(1) > > +#define APCH_CTRL_TEMPOUT BIT(2) > > +#define APCH_CTRL_TIMRPRE BIT(3) > > +#define APCH_CTRL_CHGEOCIN BIT(4) > > +#define APCH_CTRL_INCON BIT(5) > > +#define APCH_CTRL_TEMPIN BIT(6) > > +#define APCH_CTRL_TIMRTOT BIT(7) > > + > > +#define APCH_STATE_ACINSTAT (0x01 << 1) > > +#define APCH_STATE_CSTATE (0x03 << 4) > > +#define APCH_STATE_CSTATE_SHIFT 4 > > +#define APCH_STATE_CSTATE_DISABLED 0x00 > > +#define APCH_STATE_CSTATE_EOC 0x01 > > +#define APCH_STATE_CSTATE_FAST 0x02 > > +#define APCH_STATE_CSTATE_PRE 0x03 > > ditto > > I didn't point it previously but this is the same pattern... I change it in the next version. > > > + > > +struct act8945a_charger { > > + struct act8945a_dev *act8945a_dev; > > + struct power_supply *psy; > > + > > + u32 tolal_time_out; > > + u32 pre_time_out; > > + u32 input_voltage_threshold; > > + bool battery_temperature; > > + int chglev_pin; > > + int chglev_value; > > +}; > > + > > +static int act8945a_get_charger_state(struct regmap *regmap, int > > +*val) { > > + int ret; > > + unsigned int status, state; > > + > > + ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status); > > + if (ret < 0) > > + return ret; > > + > > + ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state); > > + if (ret < 0) > > + return ret; > > + > > + state &= APCH_STATE_CSTATE; > > + state >>= APCH_STATE_CSTATE_SHIFT; > > + > > + if (state == APCH_STATE_CSTATE_EOC) { > > + if (status & APCH_STATUS_CHGDAT) > > + *val = POWER_SUPPLY_STATUS_FULL; > > + else > > + *val = POWER_SUPPLY_STATUS_NOT_CHARGING; > > + } else if ((state == APCH_STATE_CSTATE_FAST) || > > + (state == APCH_STATE_CSTATE_PRE)) { > > + *val = POWER_SUPPLY_STATUS_CHARGING; > > + } else { > > + *val = POWER_SUPPLY_STATUS_NOT_CHARGING; > > + } > > + > > + return 0; > > +} > > + > > +static int act8945a_get_charge_type(struct regmap *regmap, int *val) > > +{ > > + int ret; > > + unsigned int state; > > + > > + ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state); > > + if (ret < 0) > > + return ret; > > + > > + state &= APCH_STATE_CSTATE; > > + state >>= APCH_STATE_CSTATE_SHIFT; > > + > > + switch (state) { > > + case APCH_STATE_CSTATE_PRE: > > + *val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; > > + break; > > + case APCH_STATE_CSTATE_FAST: > > + *val = POWER_SUPPLY_CHARGE_TYPE_FAST; > > + break; > > + case APCH_STATE_CSTATE_EOC: > > + case APCH_STATE_CSTATE_DISABLED: > > + default: > > + *val = POWER_SUPPLY_CHARGE_TYPE_NONE; > > + } > > + > > + return 0; > > +} > > + > > +static int act8945a_get_battery_health(struct act8945a_charger *charger, > > + struct regmap *regmap, int *val) { > > + int ret; > > + unsigned int status; > > + > > + ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status); > > + if (ret < 0) > > + return ret; > > + > > + if (charger->battery_temperature && !(status & > APCH_STATUS_TEMPDAT)) > > + *val = POWER_SUPPLY_HEALTH_OVERHEAT; > > + else if (!(status & APCH_STATUS_INDAT)) > > + *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE; > > + else if (status & APCH_STATUS_TIMRDAT) > > + *val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; > > + else > > + *val = POWER_SUPPLY_HEALTH_GOOD; > > + > > + return 0; > > +} > > + > > +static enum power_supply_property act8945a_charger_props[] = { > > + POWER_SUPPLY_PROP_STATUS, > > + POWER_SUPPLY_PROP_CHARGE_TYPE, > > + POWER_SUPPLY_PROP_TECHNOLOGY, > > + POWER_SUPPLY_PROP_HEALTH, > > + POWER_SUPPLY_PROP_MODEL_NAME, > > + POWER_SUPPLY_PROP_MANUFACTURER > > +}; > > + > > +static int act8945a_charger_get_property(struct power_supply *psy, > > + enum power_supply_property prop, > > + union power_supply_propval *val) { > > + struct act8945a_charger *charger = power_supply_get_drvdata(psy); > > + struct regmap *regmap = charger->act8945a_dev->regmap; > > + int ret = 0; > > + > > + switch (prop) { > > + case POWER_SUPPLY_PROP_STATUS: > > + ret = act8945a_get_charger_state(regmap, &val->intval); > > + break; > > + case POWER_SUPPLY_PROP_CHARGE_TYPE: > > + ret = act8945a_get_charge_type(regmap, &val->intval); > > + break; > > + case POWER_SUPPLY_PROP_TECHNOLOGY: > > + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; > > + break; > > + case POWER_SUPPLY_PROP_HEALTH: > > + ret = act8945a_get_battery_health(charger, > > + regmap, &val->intval); > > + break; > > + case POWER_SUPPLY_PROP_MODEL_NAME: > > + val->strval = act8945a_charger_model; > > + break; > > + case POWER_SUPPLY_PROP_MANUFACTURER: > > + val->strval = act8945a_charger_manufacturer; > > + break; > > + default: > > + return -EINVAL; > > + } > > + > > + return ret; > > +} > > + > > +static const struct power_supply_desc act8945a_charger_desc = { > > + .name = "act8945a-charger", > > + .type = POWER_SUPPLY_TYPE_BATTERY, > > + .get_property = act8945a_charger_get_property, > > + .properties = act8945a_charger_props, > > + .num_properties = ARRAY_SIZE(act8945a_charger_props), > > +}; > > + > > +#define DEFAULT_TOTAL_TIME_OUT 3 > > +#define DEFAULT_PRE_TIME_OUT 40 > > +#define DEFAULT_INPUT_OVP_THRESHOLD 6600 > > + > > +static int act8945a_charger_parse_dt(struct device *dev, > > + struct act8945a_charger *charger) { > > + struct device_node *np = dev->of_node; > > + enum of_gpio_flags flags; > > + > > + if (!np) { > > + dev_err(dev, "no charger of node\n"); > > + return -EINVAL; > > + } > > + > > + charger->chglev_pin = of_get_named_gpio_flags(np, > > + "active-semi,chglev-gpios", 0, &flags); > > + > > + charger->chglev_value = (flags == OF_GPIO_ACTIVE_LOW) ? 0 : 1; > > + > > + charger->battery_temperature = of_property_read_bool(np, > > + "active-semi,check-battery-temperature"); > > + > > + if (of_property_read_u32(np, > > + "active-semi,input-voltage-threshold-microvolt", > > + &charger->input_voltage_threshold)) > > + charger->input_voltage_threshold = DEFAULT_PRE_TIME_OUT; > > + > > + if (of_property_read_u32(np, "active-semi,precondition-timeout", > > + &charger->pre_time_out)) > > + charger->pre_time_out = DEFAULT_PRE_TIME_OUT; > > + > > + if (of_property_read_u32(np, "active-semi,total-timeout", > > + &charger->tolal_time_out)) > > + charger->tolal_time_out = DEFAULT_TOTAL_TIME_OUT; > > + > > + return 0; > > +} > > + > > +static int act8945a_charger_config(struct act8945a_charger *charger) > > +{ > > + struct regmap *regmap = charger->act8945a_dev->regmap; > > + u8 value = 0; > > Nothing changed here so you ignored my previous comment. That is not how we > interact. If you do not agree with them it is fine. In such case write that you do not > agree. We will discuss and reach a consensus. > > However you wrote "I will try" and then the comment was ignored... Sorry! It is my careless. > > > + > > + if (gpio_is_valid(charger->chglev_pin)) > > + gpio_set_value(charger->chglev_pin, charger->chglev_value); > > + > > + switch (charger->input_voltage_threshold) { > > + case 8000: > > + value |= APCH_CFG_OVPSET_8V; > > + break; > > + case 7500: > > + value |= APCH_CFG_OVPSET_7V5; > > + break; > > + case 7000: > > + value |= APCH_CFG_OVPSET_7V; > > + break; > > + case 6600: > > + default: > > + value |= APCH_CFG_OVPSET_6V6; > > + break; > > + } > > + > > + switch (charger->pre_time_out) { > > + case 60: > > + value |= APCH_CFG_PRETIMO_60_MIN; > > + break; > > + case 80: > > + value |= APCH_CFG_PRETIMO_80_MIN; > > + break; > > + case 0: > > + value |= APCH_CFG_PRETIMO_DISABLED; > > + break; > > + case 40: > > + default: > > + value |= APCH_CFG_PRETIMO_40_MIN; > > + break; > > + } > > + > > + switch (charger->tolal_time_out) { > > + case 4: > > + value |= APCH_CFG_TOTTIMO_4_HOUR; > > + break; > > + case 5: > > + value |= APCH_CFG_TOTTIMO_5_HOUR; > > + break; > > + case 0: > > + value |= APCH_CFG_TOTTIMO_DISABLED; > > + break; > > + case 3: > > + default: > > + value |= APCH_CFG_TOTTIMO_3_HOUR; > > + break; > > + } > > + > > + return regmap_write(regmap, ACT8945A_APCH_CFG, value); } > > + > > +static int act8945a_charger_probe(struct platform_device *pdev) { > > + struct act8945a_dev *act8945a_dev = dev_get_drvdata(pdev->dev.parent); > > + struct act8945a_charger *charger; > > + struct power_supply_config psy_cfg = {}; > > + int ret; > > + > > + charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); > > + if (!charger) > > + return -ENOMEM; > > + > > + platform_set_drvdata(pdev, charger); > > + > > + charger->act8945a_dev = act8945a_dev; > > + > > + ret = act8945a_charger_parse_dt(&pdev->dev, charger); > > + if (ret) > > + return ret; > > + > > + ret = act8945a_charger_config(charger); > > + if (ret) > > + return ret; > > + > > + psy_cfg.of_node = pdev->dev.of_node; > > + psy_cfg.drv_data = charger; > > + > > + charger->psy = devm_power_supply_register(&pdev->dev, > > + &act8945a_charger_desc, > > + &psy_cfg); > > + if (IS_ERR(charger->psy)) { > > + dev_err(&pdev->dev, "failed to register power supply\n"); > > + return PTR_ERR(charger->psy); > > + } > > + > > + return 0; > > +} > > + > > +static struct platform_driver act8945a_charger_driver = { > > + .driver = { > > + .name = "act8945a-charger", > > + }, > > + .probe = act8945a_charger_probe, > > +}; > > +module_platform_driver(act8945a_charger_driver); > > Is your driver auto-loaded properly when built as a module? By auto-loading I > mean auto-loaded by udev, not by putting to some rc-script or other modprobe- > load scripts. > I failed to configure auto-loaded in rootfs generated by buildroot. I need time to dig it. Anyway I add OF match table. Best Regards, Wenyou Yang
Hello Wenyou, On Wed, Jan 20, 2016 at 4:24 AM, Yang, Wenyou <Wenyou.Yang@atmel.com> wrote: [snip] >> > +} >> > + >> > +static struct platform_driver act8945a_charger_driver = { >> > + .driver = { >> > + .name = "act8945a-charger", >> > + }, >> > + .probe = act8945a_charger_probe, >> > +}; >> > +module_platform_driver(act8945a_charger_driver); >> >> Is your driver auto-loaded properly when built as a module? By auto-loading I >> mean auto-loaded by udev, not by putting to some rc-script or other modprobe- >> load scripts. >> > > I failed to configure auto-loaded in rootfs generated by buildroot. I need time to dig it. > > Anyway I add OF match table. > If you don't have udev/kmod working on your system, you can check if the modalias reported in the driver's uevent sysfs entry is a valid alias in the kernel module, i.e: $ grep MODALIAS $(find -name uevent | grep act8945a-charger) $ modinfo act8945a_charger | grep alias > > Best Regards, > Wenyou Yang Best regards, Javier
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 1ddd13c..ae75211 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -75,6 +75,13 @@ config BATTERY_88PM860X help Say Y here to enable battery monitor for Marvell 88PM860x chip. +config BATTERY_ACT8945A + tristate "Active-semi ACT8945A charger driver" + depends on MFD_ACT8945A + help + Say Y here to enable support for power supply provided by + Active-semi ActivePath ACT8945A charger. + config BATTERY_DS2760 tristate "DS2760 battery driver (HP iPAQ & others)" depends on W1 && W1_SLAVE_DS2760 diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 0e4eab5..e46b75d 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_WM8350_POWER) += wm8350_power.o obj-$(CONFIG_TEST_POWER) += test_power.o obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o +obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o diff --git a/drivers/power/act8945a_charger.c b/drivers/power/act8945a_charger.c new file mode 100644 index 0000000..0ebfb66 --- /dev/null +++ b/drivers/power/act8945a_charger.c @@ -0,0 +1,368 @@ +/* + * Power supply driver for the Active-semi ACT8945A PMIC + * + * Copyright (C) 2015 Atmel Corporation + * + * Author: Wenyou Yang <wenyou.yang@atmel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/module.h> +#include <linux/mfd/act8945a.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/regmap.h> + +static const char *act8945a_charger_model = "ACT8945A"; +static const char *act8945a_charger_manufacturer = "Active-semi"; + +/** + * ACT8945A Charger Register Map + */ + +/* 0x70: Reserved */ +#define ACT8945A_APCH_CFG 0x71 +#define ACT8945A_APCH_STATUS 0x78 +#define ACT8945A_APCH_CTRL 0x79 +#define ACT8945A_APCH_STATE 0x7A + +/* ACT8945A_APCH_CFG */ +#define APCH_CFG_OVPSET (0x03 << 0) +#define APCH_CFG_OVPSET_6V6 (0x0 << 0) +#define APCH_CFG_OVPSET_7V (0x1 << 0) +#define APCH_CFG_OVPSET_7V5 (0x2 << 0) +#define APCH_CFG_OVPSET_8V (0x3 << 0) +#define APCH_CFG_PRETIMO (0x03 << 2) +#define APCH_CFG_PRETIMO_40_MIN (0x0 << 2) +#define APCH_CFG_PRETIMO_60_MIN (0x1 << 2) +#define APCH_CFG_PRETIMO_80_MIN (0x2 << 2) +#define APCH_CFG_PRETIMO_DISABLED (0x3 << 2) +#define APCH_CFG_TOTTIMO (0x03 << 4) +#define APCH_CFG_TOTTIMO_3_HOUR (0x0 << 4) +#define APCH_CFG_TOTTIMO_4_HOUR (0x1 << 4) +#define APCH_CFG_TOTTIMO_5_HOUR (0x2 << 4) +#define APCH_CFG_TOTTIMO_DISABLED (0x3 << 4) +#define APCH_CFG_SUSCHG (0x01 << 7) + +#define APCH_STATUS_CHGDAT BIT(0) +#define APCH_STATUS_INDAT BIT(1) +#define APCH_STATUS_TEMPDAT BIT(2) +#define APCH_STATUS_TIMRDAT BIT(3) +#define APCH_STATUS_CHGSTAT BIT(4) +#define APCH_STATUS_INSTAT BIT(5) +#define APCH_STATUS_TEMPSTAT BIT(6) +#define APCH_STATUS_TIMRSTAT BIT(7) + +#define APCH_CTRL_CHGEOCOUT BIT(0) +#define APCH_CTRL_INDIS BIT(1) +#define APCH_CTRL_TEMPOUT BIT(2) +#define APCH_CTRL_TIMRPRE BIT(3) +#define APCH_CTRL_CHGEOCIN BIT(4) +#define APCH_CTRL_INCON BIT(5) +#define APCH_CTRL_TEMPIN BIT(6) +#define APCH_CTRL_TIMRTOT BIT(7) + +#define APCH_STATE_ACINSTAT (0x01 << 1) +#define APCH_STATE_CSTATE (0x03 << 4) +#define APCH_STATE_CSTATE_SHIFT 4 +#define APCH_STATE_CSTATE_DISABLED 0x00 +#define APCH_STATE_CSTATE_EOC 0x01 +#define APCH_STATE_CSTATE_FAST 0x02 +#define APCH_STATE_CSTATE_PRE 0x03 + +struct act8945a_charger { + struct act8945a_dev *act8945a_dev; + struct power_supply *psy; + + u32 tolal_time_out; + u32 pre_time_out; + u32 input_voltage_threshold; + bool battery_temperature; + int chglev_pin; + int chglev_value; +}; + +static int act8945a_get_charger_state(struct regmap *regmap, int *val) +{ + int ret; + unsigned int status, state; + + ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status); + if (ret < 0) + return ret; + + ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state); + if (ret < 0) + return ret; + + state &= APCH_STATE_CSTATE; + state >>= APCH_STATE_CSTATE_SHIFT; + + if (state == APCH_STATE_CSTATE_EOC) { + if (status & APCH_STATUS_CHGDAT) + *val = POWER_SUPPLY_STATUS_FULL; + else + *val = POWER_SUPPLY_STATUS_NOT_CHARGING; + } else if ((state == APCH_STATE_CSTATE_FAST) || + (state == APCH_STATE_CSTATE_PRE)) { + *val = POWER_SUPPLY_STATUS_CHARGING; + } else { + *val = POWER_SUPPLY_STATUS_NOT_CHARGING; + } + + return 0; +} + +static int act8945a_get_charge_type(struct regmap *regmap, int *val) +{ + int ret; + unsigned int state; + + ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state); + if (ret < 0) + return ret; + + state &= APCH_STATE_CSTATE; + state >>= APCH_STATE_CSTATE_SHIFT; + + switch (state) { + case APCH_STATE_CSTATE_PRE: + *val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + break; + case APCH_STATE_CSTATE_FAST: + *val = POWER_SUPPLY_CHARGE_TYPE_FAST; + break; + case APCH_STATE_CSTATE_EOC: + case APCH_STATE_CSTATE_DISABLED: + default: + *val = POWER_SUPPLY_CHARGE_TYPE_NONE; + } + + return 0; +} + +static int act8945a_get_battery_health(struct act8945a_charger *charger, + struct regmap *regmap, int *val) +{ + int ret; + unsigned int status; + + ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status); + if (ret < 0) + return ret; + + if (charger->battery_temperature && !(status & APCH_STATUS_TEMPDAT)) + *val = POWER_SUPPLY_HEALTH_OVERHEAT; + else if (!(status & APCH_STATUS_INDAT)) + *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + else if (status & APCH_STATUS_TIMRDAT) + *val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; + else + *val = POWER_SUPPLY_HEALTH_GOOD; + + return 0; +} + +static enum power_supply_property act8945a_charger_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_MANUFACTURER +}; + +static int act8945a_charger_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct act8945a_charger *charger = power_supply_get_drvdata(psy); + struct regmap *regmap = charger->act8945a_dev->regmap; + int ret = 0; + + switch (prop) { + case POWER_SUPPLY_PROP_STATUS: + ret = act8945a_get_charger_state(regmap, &val->intval); + break; + case POWER_SUPPLY_PROP_CHARGE_TYPE: + ret = act8945a_get_charge_type(regmap, &val->intval); + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + case POWER_SUPPLY_PROP_HEALTH: + ret = act8945a_get_battery_health(charger, + regmap, &val->intval); + break; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = act8945a_charger_model; + break; + case POWER_SUPPLY_PROP_MANUFACTURER: + val->strval = act8945a_charger_manufacturer; + break; + default: + return -EINVAL; + } + + return ret; +} + +static const struct power_supply_desc act8945a_charger_desc = { + .name = "act8945a-charger", + .type = POWER_SUPPLY_TYPE_BATTERY, + .get_property = act8945a_charger_get_property, + .properties = act8945a_charger_props, + .num_properties = ARRAY_SIZE(act8945a_charger_props), +}; + +#define DEFAULT_TOTAL_TIME_OUT 3 +#define DEFAULT_PRE_TIME_OUT 40 +#define DEFAULT_INPUT_OVP_THRESHOLD 6600 + +static int act8945a_charger_parse_dt(struct device *dev, + struct act8945a_charger *charger) +{ + struct device_node *np = dev->of_node; + enum of_gpio_flags flags; + + if (!np) { + dev_err(dev, "no charger of node\n"); + return -EINVAL; + } + + charger->chglev_pin = of_get_named_gpio_flags(np, + "active-semi,chglev-gpios", 0, &flags); + + charger->chglev_value = (flags == OF_GPIO_ACTIVE_LOW) ? 0 : 1; + + charger->battery_temperature = of_property_read_bool(np, + "active-semi,check-battery-temperature"); + + if (of_property_read_u32(np, + "active-semi,input-voltage-threshold-microvolt", + &charger->input_voltage_threshold)) + charger->input_voltage_threshold = DEFAULT_PRE_TIME_OUT; + + if (of_property_read_u32(np, "active-semi,precondition-timeout", + &charger->pre_time_out)) + charger->pre_time_out = DEFAULT_PRE_TIME_OUT; + + if (of_property_read_u32(np, "active-semi,total-timeout", + &charger->tolal_time_out)) + charger->tolal_time_out = DEFAULT_TOTAL_TIME_OUT; + + return 0; +} + +static int act8945a_charger_config(struct act8945a_charger *charger) +{ + struct regmap *regmap = charger->act8945a_dev->regmap; + u8 value = 0; + + if (gpio_is_valid(charger->chglev_pin)) + gpio_set_value(charger->chglev_pin, charger->chglev_value); + + switch (charger->input_voltage_threshold) { + case 8000: + value |= APCH_CFG_OVPSET_8V; + break; + case 7500: + value |= APCH_CFG_OVPSET_7V5; + break; + case 7000: + value |= APCH_CFG_OVPSET_7V; + break; + case 6600: + default: + value |= APCH_CFG_OVPSET_6V6; + break; + } + + switch (charger->pre_time_out) { + case 60: + value |= APCH_CFG_PRETIMO_60_MIN; + break; + case 80: + value |= APCH_CFG_PRETIMO_80_MIN; + break; + case 0: + value |= APCH_CFG_PRETIMO_DISABLED; + break; + case 40: + default: + value |= APCH_CFG_PRETIMO_40_MIN; + break; + } + + switch (charger->tolal_time_out) { + case 4: + value |= APCH_CFG_TOTTIMO_4_HOUR; + break; + case 5: + value |= APCH_CFG_TOTTIMO_5_HOUR; + break; + case 0: + value |= APCH_CFG_TOTTIMO_DISABLED; + break; + case 3: + default: + value |= APCH_CFG_TOTTIMO_3_HOUR; + break; + } + + return regmap_write(regmap, ACT8945A_APCH_CFG, value); +} + +static int act8945a_charger_probe(struct platform_device *pdev) +{ + struct act8945a_dev *act8945a_dev = dev_get_drvdata(pdev->dev.parent); + struct act8945a_charger *charger; + struct power_supply_config psy_cfg = {}; + int ret; + + charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); + if (!charger) + return -ENOMEM; + + platform_set_drvdata(pdev, charger); + + charger->act8945a_dev = act8945a_dev; + + ret = act8945a_charger_parse_dt(&pdev->dev, charger); + if (ret) + return ret; + + ret = act8945a_charger_config(charger); + if (ret) + return ret; + + psy_cfg.of_node = pdev->dev.of_node; + psy_cfg.drv_data = charger; + + charger->psy = devm_power_supply_register(&pdev->dev, + &act8945a_charger_desc, + &psy_cfg); + if (IS_ERR(charger->psy)) { + dev_err(&pdev->dev, "failed to register power supply\n"); + return PTR_ERR(charger->psy); + } + + return 0; +} + +static struct platform_driver act8945a_charger_driver = { + .driver = { + .name = "act8945a-charger", + }, + .probe = act8945a_charger_probe, +}; +module_platform_driver(act8945a_charger_driver); + +MODULE_DESCRIPTION("Active-semi ACT8945A ActivePath charger driver"); +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>"); +MODULE_LICENSE("GPL");
This patch adds new driver for Active-semi ACT8945A ActivePath charger (part of ACT8945A MFD driver) providing power supply class information to userspace. The driver is configured through DTS (battery and system related settings) and sysfs entries (timers and input over-voltage threshold). Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> --- Changes in v4: - use spaces after #define, not tabs. - use BIT(n) macros to substitute (0x01 << x). - change dt properties with more legible name. Changes in v3: - update the file header with short version license and author line. - remove unused member of struct act8945a_charger, dev. - action due to removing the member of stuct act8945a_dev, dev. - remove the unnecessary print out. - remove the unnecessary act8945a_charger_remove(). - fix align of the code-style. Changes in v2: 1./ Substitute of_property_read_bool() for of_get_property(). 2./ Substitute devm_power_supply_register() for power_supply_register(). 3./ Use module_platform_driver(), instead of subsys_initcall(). 4./ Substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2"). drivers/power/Kconfig | 7 + drivers/power/Makefile | 1 + drivers/power/act8945a_charger.c | 368 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 376 insertions(+) create mode 100644 drivers/power/act8945a_charger.c