| Message ID | 1453445087-2791-2-git-send-email-wenyou.yang@atmel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, 22 Jan 2016, Wenyou Yang wrote: > This patch adds support for the Active-semi ACT8945A PMIC. > It is a Multi Function Device with the following subdevices: > - Regulator > - Charger > > It is interfaced to the host controller using I2C interface, > ACT8945A is a child device of the I2C. > > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > --- > > Changes in v7: > - remove struct act8945a_dev to .c file. > - remove unused .h file. > > Changes in v6: > - change MFD_ACT8945A type from bool to tristate. > - revert depends on to 'I2C'. > > Changes in v5: > - change depends on to 'I2C=y'. > > Changes in v4: > - add a space before .compatible. > - collect Reviewed-by from Krzysztof Kozlowski. > > Changes in v3: None > Changes in v2: > - add more help information in Kconfig. > - update the file header with short version license and author line. > - remove unused structure members (dev, i2c_client) of stuct act8945a_dev. > - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'. > - use more explicit info to indicate the failure to add sub devices. > - remove the unnecessary print out. > - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2"). > > drivers/mfd/Kconfig | 11 +++++ > drivers/mfd/Makefile | 1 + > drivers/mfd/act8945a.c | 112 ++++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 124 insertions(+) > create mode 100644 drivers/mfd/act8945a.c > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 9ca66de..5038e78 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -18,6 +18,17 @@ config MFD_CS5535 > This is the core driver for CS5535/CS5536 MFD functions. This is > necessary for using the board's GPIO and MFGPT functionality. > > +config MFD_ACT8945A > + tristate "Active-semi ACT8945A" > + select MFD_CORE > + select REGMAP_I2C > + depends on I2C && OF > + help > + Support for the ACT8945A PMIC from Active-semi. This device > + features three step-down DC/DC converters and four low-dropout > + linear regulators, along with a complete ActivePath battery > + charger. > + > config MFD_AS3711 > bool "AMS AS3711" > select MFD_CORE > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index 0f230a6..2f1ca82 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -6,6 +6,7 @@ > obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o > obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o > obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o > +obj-$(CONFIG_MFD_ACT8945A) += act8945a.o > obj-$(CONFIG_MFD_SM501) += sm501.o > obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o > obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o > diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c > new file mode 100644 > index 0000000..d2e01941 > --- /dev/null > +++ b/drivers/mfd/act8945a.c > @@ -0,0 +1,112 @@ > +/* > + * MFD driver for Active-semi ACT8945a PMIC > + * > + * Copyright (C) 2015 Atmel Corporation. > + * > + * Author: Wenyou Yang <wenyou.yang@atmel.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or (at your > + * option) any later version. > + */ > + > +#include <linux/i2c.h> > +#include <linux/mfd/core.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/regmap.h> > + > +struct act8945a_dev { > + struct regmap *regmap; > +}; > + > +static const struct mfd_cell act8945a_devs[] = { > + { > + .name = "act8945a-pmic", I think this should be -regulator, rather than -pmic. I believe *this* is the PMIC driver. > + .of_compatible = "active-semi,act8945a-regulator", > + }, > + { > + .name = "act8945a-charger", > + .of_compatible = "active-semi,act8945a-charger", > + }, > +}; > + > +static const struct regmap_config act8945a_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > +}; > + > +static int act8945a_i2c_probe(struct i2c_client *i2c, > + const struct i2c_device_id *id) > +{ > + struct act8945a_dev *act8945a; > + int ret; > + > + act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL); > + if (!act8945a) > + return -ENOMEM; > + > + i2c_set_clientdata(i2c, act8945a); > + > + act8945a->regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config); > + if (IS_ERR(act8945a->regmap)) { > + ret = PTR_ERR(act8945a->regmap); > + dev_err(&i2c->dev, "regmap init failed: %d\n", ret); > + return ret; > + } Is the Regmap used in both the charger AND regulator drivers? > + ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs, > + ARRAY_SIZE(act8945a_devs), NULL, 0, NULL); > + if (ret) { > + dev_err(&i2c->dev, "Failed to add sub devices\n"); > + return ret; > + } > + > + return 0; > +} > + > +static int act8945a_i2c_remove(struct i2c_client *i2c) > +{ > + mfd_remove_devices(&i2c->dev); > + > + return 0; > +} > + > +static const struct i2c_device_id act8945a_i2c_id[] = { > + { "act8945a", 0 }, > + {} > +}; > +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id); > + > +static const struct of_device_id act8945a_of_match[] = { > + { .compatible = "active-semi,act8945a", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, act8945a_of_match); > + > +static struct i2c_driver act8945a_i2c_driver = { > + .driver = { > + .name = "act8945a", > + .of_match_table = of_match_ptr(act8945a_of_match), > + }, > + .probe = act8945a_i2c_probe, > + .remove = act8945a_i2c_remove, > + .id_table = act8945a_i2c_id, > +}; > + > +static int __init act8945a_i2c_init(void) > +{ > + return i2c_add_driver(&act8945a_i2c_driver); > +} > +subsys_initcall(act8945a_i2c_init); > + > +static void __exit act8945a_i2c_exit(void) > +{ > + i2c_del_driver(&act8945a_i2c_driver); > +} > +module_exit(act8945a_i2c_exit); > + > +MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver"); > +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>"); > +MODULE_LICENSE("GPL");
Hi Lee, Thank you for your review. > -----Original Message----- > From: Lee Jones [mailto:lee.jones@linaro.org] > Sent: 2016?1?25? 20:50 > To: Yang, Wenyou <Wenyou.Yang@atmel.com> > Cc: Rob Herring <robh+dt@kernel.org>; Pawel Moll <pawel.moll@arm.com>; > Mark Rutland <mark.rutland@arm.com>; Ian Campbell > <ijc+devicetree@hellion.org.uk>; Kumar Gala <galak@codeaurora.org>; Javier > Martinez Canillas <javier@dowhile0.org>; Krzysztof Kozlowski > <k.kozlowski@samsung.com>; Peter Korsgaard <jacmet@gmail.com>; Ferre, > Nicolas <Nicolas.FERRE@atmel.com>; linux-arm-kernel@lists.infradead.org; > linux-kernel@vger.kernel.org; devicetree@vger.kernel.org > Subject: Re: [PATCH v7 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC > MFD driver > > On Fri, 22 Jan 2016, Wenyou Yang wrote: > > > This patch adds support for the Active-semi ACT8945A PMIC. > > It is a Multi Function Device with the following subdevices: > > - Regulator > > - Charger > > > > It is interfaced to the host controller using I2C interface, ACT8945A > > is a child device of the I2C. > > > > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > > --- > > > > Changes in v7: > > - remove struct act8945a_dev to .c file. > > - remove unused .h file. > > > > Changes in v6: > > - change MFD_ACT8945A type from bool to tristate. > > - revert depends on to 'I2C'. > > > > Changes in v5: > > - change depends on to 'I2C=y'. > > > > Changes in v4: > > - add a space before .compatible. > > - collect Reviewed-by from Krzysztof Kozlowski. > > > > Changes in v3: None > > Changes in v2: > > - add more help information in Kconfig. > > - update the file header with short version license and author line. > > - remove unused structure members (dev, i2c_client) of stuct act8945a_dev. > > - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'. > > - use more explicit info to indicate the failure to add sub devices. > > - remove the unnecessary print out. > > - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2"). > > > > drivers/mfd/Kconfig | 11 +++++ > > drivers/mfd/Makefile | 1 + > > drivers/mfd/act8945a.c | 112 > > ++++++++++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 124 insertions(+) > > create mode 100644 drivers/mfd/act8945a.c > > > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index > > 9ca66de..5038e78 100644 > > --- a/drivers/mfd/Kconfig > > +++ b/drivers/mfd/Kconfig > > @@ -18,6 +18,17 @@ config MFD_CS5535 > > This is the core driver for CS5535/CS5536 MFD functions. This is > > necessary for using the board's GPIO and MFGPT functionality. > > > > +config MFD_ACT8945A > > + tristate "Active-semi ACT8945A" > > + select MFD_CORE > > + select REGMAP_I2C > > + depends on I2C && OF > > + help > > + Support for the ACT8945A PMIC from Active-semi. This device > > + features three step-down DC/DC converters and four low-dropout > > + linear regulators, along with a complete ActivePath battery > > + charger. > > + > > config MFD_AS3711 > > bool "AMS AS3711" > > select MFD_CORE > > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index > > 0f230a6..2f1ca82 100644 > > --- a/drivers/mfd/Makefile > > +++ b/drivers/mfd/Makefile > > @@ -6,6 +6,7 @@ > > obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o > > obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o > > obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o > > +obj-$(CONFIG_MFD_ACT8945A) += act8945a.o > > obj-$(CONFIG_MFD_SM501) += sm501.o > > obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o > > obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o > > diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c new file > > mode 100644 index 0000000..d2e01941 > > --- /dev/null > > +++ b/drivers/mfd/act8945a.c > > @@ -0,0 +1,112 @@ > > +/* > > + * MFD driver for Active-semi ACT8945a PMIC > > + * > > + * Copyright (C) 2015 Atmel Corporation. > > + * > > + * Author: Wenyou Yang <wenyou.yang@atmel.com> > > + * > > + * This program is free software; you can redistribute it and/or > > +modify it > > + * under the terms of the GNU General Public License as published > > +by the > > + * Free Software Foundation; either version 2 of the License, or (at > > +your > > + * option) any later version. > > + */ > > + > > +#include <linux/i2c.h> > > +#include <linux/mfd/core.h> > > +#include <linux/module.h> > > +#include <linux/of_device.h> > > +#include <linux/regmap.h> > > + > > +struct act8945a_dev { > > + struct regmap *regmap; > > +}; > > + > > +static const struct mfd_cell act8945a_devs[] = { > > + { > > + .name = "act8945a-pmic", > > I think this should be -regulator, rather than -pmic. Yes, -regulator is better. > > I believe *this* is the PMIC driver. > > > + .of_compatible = "active-semi,act8945a-regulator", > > + }, > > + { > > + .name = "act8945a-charger", > > + .of_compatible = "active-semi,act8945a-charger", > > + }, > > +}; > > + > > +static const struct regmap_config act8945a_regmap_config = { > > + .reg_bits = 8, > > + .val_bits = 8, > > +}; > > + > > +static int act8945a_i2c_probe(struct i2c_client *i2c, > > + const struct i2c_device_id *id) { > > + struct act8945a_dev *act8945a; > > + int ret; > > + > > + act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL); > > + if (!act8945a) > > + return -ENOMEM; > > + > > + i2c_set_clientdata(i2c, act8945a); > > + > > + act8945a->regmap = devm_regmap_init_i2c(i2c, > &act8945a_regmap_config); > > + if (IS_ERR(act8945a->regmap)) { > > + ret = PTR_ERR(act8945a->regmap); > > + dev_err(&i2c->dev, "regmap init failed: %d\n", ret); > > + return ret; > > + } > > Is the Regmap used in both the charger AND regulator drivers? Yes, used in both drivers. The regmap is got through dev_get_regmap(pdev->dev.parent, NULL). > > > + ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, > act8945a_devs, > > + ARRAY_SIZE(act8945a_devs), NULL, 0, NULL); > > + if (ret) { > > + dev_err(&i2c->dev, "Failed to add sub devices\n"); > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > +static int act8945a_i2c_remove(struct i2c_client *i2c) { > > + mfd_remove_devices(&i2c->dev); > > + > > + return 0; > > +} > > + > > +static const struct i2c_device_id act8945a_i2c_id[] = { > > + { "act8945a", 0 }, > > + {} > > +}; > > +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id); > > + > > +static const struct of_device_id act8945a_of_match[] = { > > + { .compatible = "active-semi,act8945a", }, > > + {}, > > +}; > > +MODULE_DEVICE_TABLE(of, act8945a_of_match); > > + > > +static struct i2c_driver act8945a_i2c_driver = { > > + .driver = { > > + .name = "act8945a", > > + .of_match_table = of_match_ptr(act8945a_of_match), > > + }, > > + .probe = act8945a_i2c_probe, > > + .remove = act8945a_i2c_remove, > > + .id_table = act8945a_i2c_id, > > +}; > > + > > +static int __init act8945a_i2c_init(void) { > > + return i2c_add_driver(&act8945a_i2c_driver); > > +} > > +subsys_initcall(act8945a_i2c_init); > > + > > +static void __exit act8945a_i2c_exit(void) { > > + i2c_del_driver(&act8945a_i2c_driver); > > +} > > +module_exit(act8945a_i2c_exit); > > + > > +MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver"); > > +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>"); > > +MODULE_LICENSE("GPL"); > > -- > Lee Jones > Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source > software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog Best Regards, Wenyou Yang
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 9ca66de..5038e78 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -18,6 +18,17 @@ config MFD_CS5535 This is the core driver for CS5535/CS5536 MFD functions. This is necessary for using the board's GPIO and MFGPT functionality. +config MFD_ACT8945A + tristate "Active-semi ACT8945A" + select MFD_CORE + select REGMAP_I2C + depends on I2C && OF + help + Support for the ACT8945A PMIC from Active-semi. This device + features three step-down DC/DC converters and four low-dropout + linear regulators, along with a complete ActivePath battery + charger. + config MFD_AS3711 bool "AMS AS3711" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 0f230a6..2f1ca82 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o +obj-$(CONFIG_MFD_ACT8945A) += act8945a.o obj-$(CONFIG_MFD_SM501) += sm501.o obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c new file mode 100644 index 0000000..d2e01941 --- /dev/null +++ b/drivers/mfd/act8945a.c @@ -0,0 +1,112 @@ +/* + * MFD driver for Active-semi ACT8945a PMIC + * + * Copyright (C) 2015 Atmel Corporation. + * + * Author: Wenyou Yang <wenyou.yang@atmel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> + +struct act8945a_dev { + struct regmap *regmap; +}; + +static const struct mfd_cell act8945a_devs[] = { + { + .name = "act8945a-pmic", + .of_compatible = "active-semi,act8945a-regulator", + }, + { + .name = "act8945a-charger", + .of_compatible = "active-semi,act8945a-charger", + }, +}; + +static const struct regmap_config act8945a_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int act8945a_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct act8945a_dev *act8945a; + int ret; + + act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL); + if (!act8945a) + return -ENOMEM; + + i2c_set_clientdata(i2c, act8945a); + + act8945a->regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config); + if (IS_ERR(act8945a->regmap)) { + ret = PTR_ERR(act8945a->regmap); + dev_err(&i2c->dev, "regmap init failed: %d\n", ret); + return ret; + } + + ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs, + ARRAY_SIZE(act8945a_devs), NULL, 0, NULL); + if (ret) { + dev_err(&i2c->dev, "Failed to add sub devices\n"); + return ret; + } + + return 0; +} + +static int act8945a_i2c_remove(struct i2c_client *i2c) +{ + mfd_remove_devices(&i2c->dev); + + return 0; +} + +static const struct i2c_device_id act8945a_i2c_id[] = { + { "act8945a", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id); + +static const struct of_device_id act8945a_of_match[] = { + { .compatible = "active-semi,act8945a", }, + {}, +}; +MODULE_DEVICE_TABLE(of, act8945a_of_match); + +static struct i2c_driver act8945a_i2c_driver = { + .driver = { + .name = "act8945a", + .of_match_table = of_match_ptr(act8945a_of_match), + }, + .probe = act8945a_i2c_probe, + .remove = act8945a_i2c_remove, + .id_table = act8945a_i2c_id, +}; + +static int __init act8945a_i2c_init(void) +{ + return i2c_add_driver(&act8945a_i2c_driver); +} +subsys_initcall(act8945a_i2c_init); + +static void __exit act8945a_i2c_exit(void) +{ + i2c_del_driver(&act8945a_i2c_driver); +} +module_exit(act8945a_i2c_exit); + +MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver"); +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>"); +MODULE_LICENSE("GPL");