| Message ID | 1453887530-22490-2-git-send-email-wenyou.yang@atmel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, 27 Jan 2016, Wenyou Yang wrote: > This patch adds support for the Active-semi ACT8945A PMIC. > It is a Multi Function Device with the following subdevices: > - Regulator > - Charger > > It is interfaced to the host controller using I2C interface, > ACT8945A is a child device of the I2C. > > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > Acked-by: Lee Jones <lee.jones@linaro.org> > Acked-by: Peter Korsgaard <peter@korsgaard.com> > --- > > Changes in v9: > - remove unneeded struct act8945a_dev structure. > - collect Acked from Lee. > - collect Acked from Peter. > > Changes in v8: > - change the subdevice's name "act8945a-pmic" to "act8945a-regulator". > > Changes in v7: > - remove struct act8945a_dev to .c file. > - remove unused .h file. > > Changes in v6: > - change MFD_ACT8945A type from bool to tristate. > - revert depends on to 'I2C'. > > Changes in v5: > - change depends on to 'I2C=y'. > > Changes in v4: > - add a space before .compatible. > - collect Reviewed-by from Krzysztof Kozlowski. > > Changes in v3: None > Changes in v2: > - add more help information in Kconfig. > - update the file header with short version license and author line. > - remove unused structure members (dev, i2c_client) of stuct act8945a_dev. > - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'. > - use more explicit info to indicate the failure to add sub devices. > - remove the unnecessary print out. > - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2"). > > drivers/mfd/Kconfig | 11 +++++ > drivers/mfd/Makefile | 1 + > drivers/mfd/act8945a.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 116 insertions(+) > create mode 100644 drivers/mfd/act8945a.c Applied, thanks. > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 6c4ebd9..38994bb 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -18,6 +18,17 @@ config MFD_CS5535 > This is the core driver for CS5535/CS5536 MFD functions. This is > necessary for using the board's GPIO and MFGPT functionality. > > +config MFD_ACT8945A > + tristate "Active-semi ACT8945A" > + select MFD_CORE > + select REGMAP_I2C > + depends on I2C && OF > + help > + Support for the ACT8945A PMIC from Active-semi. This device > + features three step-down DC/DC converters and four low-dropout > + linear regulators, along with a complete ActivePath battery > + charger. > + > config MFD_AS3711 > bool "AMS AS3711" > select MFD_CORE > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index 0f230a6..2f1ca82 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -6,6 +6,7 @@ > obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o > obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o > obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o > +obj-$(CONFIG_MFD_ACT8945A) += act8945a.o > obj-$(CONFIG_MFD_SM501) += sm501.o > obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o > obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o > diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c > new file mode 100644 > index 0000000..f59eb99 > --- /dev/null > +++ b/drivers/mfd/act8945a.c > @@ -0,0 +1,104 @@ > +/* > + * MFD driver for Active-semi ACT8945a PMIC > + * > + * Copyright (C) 2015 Atmel Corporation. > + * > + * Author: Wenyou Yang <wenyou.yang@atmel.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or (at your > + * option) any later version. > + */ > + > +#include <linux/i2c.h> > +#include <linux/mfd/core.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/regmap.h> > + > +static const struct mfd_cell act8945a_devs[] = { > + { > + .name = "act8945a-regulator", > + .of_compatible = "active-semi,act8945a-regulator", > + }, > + { > + .name = "act8945a-charger", > + .of_compatible = "active-semi,act8945a-charger", > + }, > +}; > + > +static const struct regmap_config act8945a_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > +}; > + > +static int act8945a_i2c_probe(struct i2c_client *i2c, > + const struct i2c_device_id *id) > +{ > + int ret; > + struct regmap *regmap; > + > + regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config); > + if (IS_ERR(regmap)) { > + ret = PTR_ERR(regmap); > + dev_err(&i2c->dev, "regmap init failed: %d\n", ret); > + return ret; > + } > + > + i2c_set_clientdata(i2c, regmap); > + > + ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs, > + ARRAY_SIZE(act8945a_devs), NULL, 0, NULL); > + if (ret) { > + dev_err(&i2c->dev, "Failed to add sub devices\n"); > + return ret; > + } > + > + return 0; > +} > + > +static int act8945a_i2c_remove(struct i2c_client *i2c) > +{ > + mfd_remove_devices(&i2c->dev); > + > + return 0; > +} > + > +static const struct i2c_device_id act8945a_i2c_id[] = { > + { "act8945a", 0 }, > + {} > +}; > +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id); > + > +static const struct of_device_id act8945a_of_match[] = { > + { .compatible = "active-semi,act8945a", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, act8945a_of_match); > + > +static struct i2c_driver act8945a_i2c_driver = { > + .driver = { > + .name = "act8945a", > + .of_match_table = of_match_ptr(act8945a_of_match), > + }, > + .probe = act8945a_i2c_probe, > + .remove = act8945a_i2c_remove, > + .id_table = act8945a_i2c_id, > +}; > + > +static int __init act8945a_i2c_init(void) > +{ > + return i2c_add_driver(&act8945a_i2c_driver); > +} > +subsys_initcall(act8945a_i2c_init); > + > +static void __exit act8945a_i2c_exit(void) > +{ > + i2c_del_driver(&act8945a_i2c_driver); > +} > +module_exit(act8945a_i2c_exit); > + > +MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver"); > +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>"); > +MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 6c4ebd9..38994bb 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -18,6 +18,17 @@ config MFD_CS5535 This is the core driver for CS5535/CS5536 MFD functions. This is necessary for using the board's GPIO and MFGPT functionality. +config MFD_ACT8945A + tristate "Active-semi ACT8945A" + select MFD_CORE + select REGMAP_I2C + depends on I2C && OF + help + Support for the ACT8945A PMIC from Active-semi. This device + features three step-down DC/DC converters and four low-dropout + linear regulators, along with a complete ActivePath battery + charger. + config MFD_AS3711 bool "AMS AS3711" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 0f230a6..2f1ca82 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o +obj-$(CONFIG_MFD_ACT8945A) += act8945a.o obj-$(CONFIG_MFD_SM501) += sm501.o obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c new file mode 100644 index 0000000..f59eb99 --- /dev/null +++ b/drivers/mfd/act8945a.c @@ -0,0 +1,104 @@ +/* + * MFD driver for Active-semi ACT8945a PMIC + * + * Copyright (C) 2015 Atmel Corporation. + * + * Author: Wenyou Yang <wenyou.yang@atmel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> + +static const struct mfd_cell act8945a_devs[] = { + { + .name = "act8945a-regulator", + .of_compatible = "active-semi,act8945a-regulator", + }, + { + .name = "act8945a-charger", + .of_compatible = "active-semi,act8945a-charger", + }, +}; + +static const struct regmap_config act8945a_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int act8945a_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + int ret; + struct regmap *regmap; + + regmap = devm_regmap_init_i2c(i2c, &act8945a_regmap_config); + if (IS_ERR(regmap)) { + ret = PTR_ERR(regmap); + dev_err(&i2c->dev, "regmap init failed: %d\n", ret); + return ret; + } + + i2c_set_clientdata(i2c, regmap); + + ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, act8945a_devs, + ARRAY_SIZE(act8945a_devs), NULL, 0, NULL); + if (ret) { + dev_err(&i2c->dev, "Failed to add sub devices\n"); + return ret; + } + + return 0; +} + +static int act8945a_i2c_remove(struct i2c_client *i2c) +{ + mfd_remove_devices(&i2c->dev); + + return 0; +} + +static const struct i2c_device_id act8945a_i2c_id[] = { + { "act8945a", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id); + +static const struct of_device_id act8945a_of_match[] = { + { .compatible = "active-semi,act8945a", }, + {}, +}; +MODULE_DEVICE_TABLE(of, act8945a_of_match); + +static struct i2c_driver act8945a_i2c_driver = { + .driver = { + .name = "act8945a", + .of_match_table = of_match_ptr(act8945a_of_match), + }, + .probe = act8945a_i2c_probe, + .remove = act8945a_i2c_remove, + .id_table = act8945a_i2c_id, +}; + +static int __init act8945a_i2c_init(void) +{ + return i2c_add_driver(&act8945a_i2c_driver); +} +subsys_initcall(act8945a_i2c_init); + +static void __exit act8945a_i2c_exit(void) +{ + i2c_del_driver(&act8945a_i2c_driver); +} +module_exit(act8945a_i2c_exit); + +MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver"); +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>"); +MODULE_LICENSE("GPL");