| Message ID | 1453887530-22490-3-git-send-email-wenyou.yang@atmel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, 27 Jan 2016, Wenyou Yang wrote: > The Active-semi ACT8945A PMIC is a Multi-Function Device, it has > two subdevices: > - Regulator > - Charger > > This patch adds documentation for ACT8945A DT bindings. > > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > Acked-by: Rob Herring <robh@kernel.org> > Acked-by: Lee Jones <lee.jones@linaro.org> > --- > > Changes in v9: None > Changes in v8: None > Changes in v7: > - collect Acked-by from Lee Jones > > Changes in v6: > - change the regulator name. > > Changes in v5: None > Changes in v4: None > Changes in v3: > - fix the tabbing errors in Example. > - use "pmic@5b" label, not "act8945a@5b" in Example. > - collect Acked-by from Rob. > > Changes in v2: > - use more specific label in Example. > - add pmic and charger nodes in Example. > > Documentation/devicetree/bindings/mfd/act8945a.txt | 82 ++++++++++++++++++++ > 1 file changed, 82 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/act8945a.txt Applied, thanks. > diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt > new file mode 100644 > index 0000000..f2a8387 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/act8945a.txt > @@ -0,0 +1,82 @@ > +Device-Tree bindings for Active-semi ACT8945A MFD driver > + > +Required properties: > + - compatible: "active-semi,act8945a". > + - reg: the I2C slave address for the ACT8945A chip > + > +The chip exposes two subdevices: > + - a regulators: see ../regulator/act8945a-regulator.txt > + - a charger: see ../power/act8945a-charger.txt > + > +Example: > + pmic@5b { > + compatible = "active-semi,act8945a"; > + reg = <0x5b>; > + status = "okay"; > + > + pmic { > + compatible = "active-semi,act8945a-regulator"; > + active-semi,vsel-high; > + > + regulators { > + vdd_1v35_reg: REG_DCDC1 { > + regulator-name = "VDD_1V35"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + }; > + > + vdd_1v2_reg: REG_DCDC2 { > + regulator-name = "VDD_1V2"; > + regulator-min-microvolt = <1100000>; > + regulator-max-microvolt = <1300000>; > + regulator-always-on; > + }; > + > + vdd_3v3_reg: REG_DCDC3 { > + regulator-name = "VDD_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vdd_fuse_reg: REG_LDO1 { > + regulator-name = "VDD_FUSE"; > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-always-on; > + }; > + > + vdd_3v3_lp_reg: REG_LDO2 { > + regulator-name = "VDD_3V3_LP"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vdd_led_reg: REG_LDO3 { > + regulator-name = "VDD_LED"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vdd_sdhc_1v8_reg: REG_LDO4 { > + regulator-name = "VDD_SDHC_1V8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + }; > + }; > + > + charger { > + compatible = "active-semi,act8945a-charger"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_charger_chglev>; > + active-semi,chglev-gpio = <&pioA 12 GPIO_ACTIVE_HIGH>; > + active-semi,input_voltage_threshold = <6600>; > + active-semi,precondition_timeout = <40>; > + active-semi,total_timeout = <3>; > + }; > + };
diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt new file mode 100644 index 0000000..f2a8387 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/act8945a.txt @@ -0,0 +1,82 @@ +Device-Tree bindings for Active-semi ACT8945A MFD driver + +Required properties: + - compatible: "active-semi,act8945a". + - reg: the I2C slave address for the ACT8945A chip + +The chip exposes two subdevices: + - a regulators: see ../regulator/act8945a-regulator.txt + - a charger: see ../power/act8945a-charger.txt + +Example: + pmic@5b { + compatible = "active-semi,act8945a"; + reg = <0x5b>; + status = "okay"; + + pmic { + compatible = "active-semi,act8945a-regulator"; + active-semi,vsel-high; + + regulators { + vdd_1v35_reg: REG_DCDC1 { + regulator-name = "VDD_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vdd_1v2_reg: REG_DCDC2 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + vdd_3v3_reg: REG_DCDC3 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_fuse_reg: REG_LDO1 { + regulator-name = "VDD_FUSE"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdd_3v3_lp_reg: REG_LDO2 { + regulator-name = "VDD_3V3_LP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_led_reg: REG_LDO3 { + regulator-name = "VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_sdhc_1v8_reg: REG_LDO4 { + regulator-name = "VDD_SDHC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; + + charger { + compatible = "active-semi,act8945a-charger"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_charger_chglev>; + active-semi,chglev-gpio = <&pioA 12 GPIO_ACTIVE_HIGH>; + active-semi,input_voltage_threshold = <6600>; + active-semi,precondition_timeout = <40>; + active-semi,total_timeout = <3>; + }; + };